Date: Sun, 29 Apr 2001 14:47:47 +0300 From: Tomi Vainio - Sun Finland - <Tomi.Vainio@Sun.COM> To: "Kenneth D. Merry" <ken@kdm.org> Cc: freebsd-current@FreeBSD.ORG Subject: Re: camcontrol stop / restart broken Message-ID: <15083.65379.523173.371122@ultrahot.Finland.Sun.COM> In-Reply-To: <20010428224047.A37268@panzer.kdm.org> References: <15083.9059.887489.356984@ultrahot.Finland.Sun.COM> <20010428224047.A37268@panzer.kdm.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Kenneth D. Merry writes: > > Can you do the following: > > camcontrol stop da1 > camcontrol tur da1 -v > [ then you can start it back up with camcontrol start ] > > What I want to see here is the sense information coming back from the drive > when it is spun down. > > The new error recovery code should be doing the same thing as the old error > recovery code -- sending a start unit. For some reason it isn't doing the > right thing, though. > cat:~(10)# camcontrol stop da1 Unit stopped successfully cat:~(11)# camcontrol tur da1 -v Unit is not ready (pass1:ahc0:0:2:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (pass1:ahc0:0:2:0): CAM Status: SCSI Status Error (pass1:ahc0:0:2:0): SCSI Status: Check Condition (pass1:ahc0:0:2:0): NOT READY asc:4,2 (pass1:ahc0:0:2:0): Logical unit not ready, initializing cmd. required field replaceable unit: 2 cat:~(12)# mount /f mount: /dev/da1s1e: Input/output error cat:~(13)# camcontrol tur da1 -v Unit is not ready (pass1:ahc0:0:2:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (pass1:ahc0:0:2:0): CAM Status: SCSI Status Error (pass1:ahc0:0:2:0): SCSI Status: Check Condition (pass1:ahc0:0:2:0): NOT READY asc:4,2 (pass1:ahc0:0:2:0): Logical unit not ready, initializing cmd. required field replaceable unit: 2 cat:~(15)# camcontrol start da1 Unit started successfully cat:~(16)# mount /f mount: /dev/da1s1e: Input/output error cat:~(17)# camcontrol devlist <IBM DDRS-34560 S97B> at scbus0 target 0 lun 0 (pass0,da0) <SEAGATE ST32550W 0420> at scbus1 target 2 lun 0 (probe0,pass1,da1) Also messages file is full of these: Apr 29 00:55:42 cat /boot/kernel/kernel: (noperiph:ahc0:0:2:0): xpt_scan_lun: can't allocate path, can't continue Apr 29 00:55:43 cat last message repeated 26 times Apr 29 00:57:43 cat last message repeated 359 times Apr 29 01:07:43 cat last message repeated 1793 times Apr 29 01:17:43 cat last message repeated 1794 times Apr 29 01:27:43 cat last message repeated 1793 times Apr 29 01:34:13 cat last message repeated 1122 times Apr 29 01:34:13 cat /boot/kernel/kernel: (noperiph:ahc0:0:2:0): xpt_scan_lun: can't allocate path, can't continue Apr 29 01:34:13 cat last message repeated 43 times Apr 29 01:36:02 cat last message repeated 322 times Tomppa -- SUN Microsystems Oy PL 112, Lars Sonckin kaari 12, 02601 ESPOO, Finland Tomi Vainio (System Support Engineer) +358 9 52556300 hotline email: Tomi.Vainio@Sun.COM +358 9 52556252 fax To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?15083.65379.523173.371122>