Date: Mon, 09 Aug 1999 21:03:44 +0100 From: Stuart Henderson <stuart@eclipse.net.uk> To: "Kenneth D. Merry" <ken@kdm.org> Cc: Mike Tancsa <mike@sentex.net>, scsi@FreeBSD.ORG, questions@FreeBSD.ORG Subject: Re: External RAID boxes (was Re: AHC errors. Bad disk or bad firmware, or bug in driver ?) Message-ID: <37AF3420.370FB158@eclipse.net.uk> References: <199908091904.NAA29799@panzer.kdm.org>
next in thread | previous in thread | raw e-mail | index | archive | help
> Other folks have had success with Mylex controllers, and it might be > worthwhile going with one of those, along with some nice high-end drives. Based on what I found in raid.pdf, I think it might be worth asking Legacy if they use raid controllers made by Mylex in their arrays. A lot of RAID kit is oem'd and that model number sounds very familiar :) > Management Port > Cause: The SmartARRAY cannot establish > communication with the DAC960 hardware > RAID controller through the AEMI > management port. > Warning: Panel flashes and audible alarm sounds. > Solution: Ensure that the server is turned on after > SmartARRAY is turned on and that the server is > turned off before the SmartARRAY is turned > off. It is normal for this error condition to > appear when the SmartARRAY is turned on > before the server or when the server is turned off > before the SmartARRAY. If the condition is not > a result of the above, contact Technical Support > (see Chapter 5 - Customer Support for contact > information). To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?37AF3420.370FB158>