Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 29 Jul 2010 00:24:56 +0200
From:      Martin <nakal@web.de>
To:        freebsd-stable@freebsd.org
Subject:   ath(4) hostap with fake MAC/BSSID results in station dropping packets when associated
Message-ID:  <20100729002456.0f8789e8@zelda.oni>

next in thread | raw e-mail | index | archive | help

Hi,

I noticed a bug that was introduced somewhere in the Atheros 9280
support in 8.1-RELEASE when used as a station. I had this already
running correctly with 7.x releases.

What happens:

I cannot connect to a hostap ath(4) (Atheros 2413) when using a fake
MAC/BSSID (on the hostap!).

How to reproduce it:

1) Put this into your rc.local on your hostap machine and replace xx's
by an address of your choice (first octet needs to have lowest bit "0"):

ifconfig ath0 ether xx:xx:xx:xx:xx:xx

2) Start hostapd (must be configured, of course). Eventually you need
to set BSSID also in hostapd.conf.

3) Try to connect with an Atheros 9280. You don't need to fake MAC
address here (I'm only talking about the hostap MAC/BSSID).

What you get:

- You get association. This is OK, so far.
- Try DHCP. You won't see packets arriving at the station. They are not
  recognized and filtered somewhere.
- When you watch with tcpdump on the hostap interface you'll see DHCP
  requests arriving and being answered.
- I further noticed, even you don't have any IP (set to 0.0.0.0,
  because of failed DHCP), you can see packets being sent to different
  machines
- You can try to setup a static address, but when you ping the station,
  you don't see a ping arriving (watch tcpdump on the station wireless
  interface and try to ping from the hostap machine).

Further information:

- This only affects ath(4) and I could only see this on Atheros 9280,
  because I don't have any other ath(4) adapters at the moment.
- I tried rum(4). It does not have any problems like this. DHCP and
  everything else works with this driver (of course with a fake
  MAC/BSSID!).
- Running 8.1-RELEASE on all machines. Kernel is GENERIC, but on hostap
  machine there is ALTQ added (should not affect anything, as I said,
  I had this running already).
- hostapd is configured with 11g, WPA2 and passwords in hostapd.wpapsk.
  WME is switched off, because it does not work at all for me.

I can provide more information, if needed.

--
Martin



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20100729002456.0f8789e8>