Date: Tue, 11 Dec 2007 09:16:58 +0100 From: Thomas Vogt <freebsdlists@bsdunix.ch> To: Oleg Bulyzhin <oleg@freebsd.org> Cc: freebsd-current@freebsd.org Subject: Re: FreeBSD 7.0Beta4 (amd64) freezes with dummynet enabled Message-ID: <475E477A.80802@bsdunix.ch> In-Reply-To: <20071210183100.GA32000@lath.rinet.ru> References: <475D5CF7.2020803@bsdunix.ch> <20071210183100.GA32000@lath.rinet.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Oleg Bulyzhin wrote: > On Mon, Dec 10, 2007 at 04:36:23PM +0100, Thomas Vogt wrote: >> Hi, >> >> I kindly ask for advice for debugging a problem with 7.0-Beta 4 (amd64). >> >> The machine freezes if dummynet rules are enabled on a gigabit port. The >> system runs fine on fast ethernet or with dummynet rules disabled. I >> can't trigger the bug if my upstream port is limited to 100mbit. The >> machine suddenly freezes after 3-4 minutes if dummynet rules are loaded. >> >> My Kernel already includes some debug options but I'm not able to >> produce a panic. >> >> Kernel: >> options IPFIREWALL >> options IPFIREWALL_VERBOSE >> options IPFIREWALL_VERBOSE_LIMIT=100 >> options IPFIREWALL_DEFAULT_TO_ACCEPT >> options DUMMYNET >> options ZERO_COPY_SOCKETS >> options DEVICE_POLLING >> options HZ=1000 >> >> options INVARIANTS >> options INVARIANT_SUPPORT >> options WITNESS >> options DEBUG_VFS_LOCKS >> options DIAGNOSTIC >> options KDB >> options KDB_UNATTENDED >> options DDB >> options GDB >> options KDB_TRACE >> options SOCKBUF_DEBUG >> options BREAK_TO_DEBUGGER >> >> dmesg: >> Copyright (c) 1992-2007 The FreeBSD Project. >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 >> The Regents of the University of California. All rights reserved. >> FreeBSD is a registered trademark of The FreeBSD Foundation. >> FreeBSD 7.0-BETA4 #4: Fri Dec 7 12:45:37 UTC 2007 >> root@lisa.mlan.solnet.ch:/usr/obj/usr/src/sys/SOLNETDEBUG >> WARNING: WITNESS option enabled, expect reduced performance. >> WARNING: DIAGNOSTIC option enabled, expect reduced performance. >> Timecounter "i8254" frequency 1193182 Hz quality 0 >> CPU: Intel(R) Xeon(R) CPU 5110 @ 1.60GHz (1739.55-MHz >> K8-class CPU) >> Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6 >> >> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> >> Features2=0x4e33d<SSE3,RSVD2,MON,DS_CPL,VMX,TM2,SSSE3,CX16,xTPR,PDCM,DCA> >> AMD Features=0x20100800<SYSCALL,NX,LM> >> AMD Features2=0x1<LAHF> >> Cores per package: 2 >> usable memory = 4258033664 (4060 MB) >> avail memory = 4071751680 (3883 MB) >> ACPI APIC Table: <INTEL S5000XVN> >> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs >> cpu0 (BSP): APIC ID: 0 >> cpu1 (AP): APIC ID: 1 >> WITNESS: spin lock intrcnt not in order list >> ioapic0 <Version 2.0> irqs 0-23 on motherboard >> ioapic1 <Version 2.0> irqs 24-47 on motherboard >> lapic0: Forcing LINT1 to edge trigger >> kbd1 at kbdmux0 >> acpi0: <INTEL S5000XVN> on motherboard >> acpi0: [ITHREAD] >> acpi0: Power Button (fixed) >> acpi0: reservation of 0, a0000 (3) failed >> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 >> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 >> acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on >> acpi0 >> Timecounter "HPET" frequency 14318180 Hz quality 900 >> cpu0: <ACPI CPU> on acpi0 >> device_attach: acpi_perf0 attach returned 6 >> device_attach: acpi_perf0 attach returned 6 >> p4tcc0: <CPU Frequency Thermal Control> on cpu0 >> cpu1: <ACPI CPU> on acpi0 >> device_attach: acpi_perf1 attach returned 6 >> device_attach: acpi_perf1 attach returned 6 >> p4tcc1: <CPU Frequency Thermal Control> on cpu1 >> acpi_button0: <Sleep Button> on acpi0 >> acpi_button1: <Power Button> on acpi0 >> pcib0: <ACPI Host-PCI bridge> port 0xca2,0xca3,0xcf8-0xcff on acpi0 >> pci0: <ACPI PCI bus> on pcib0 >> pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 >> pci1: <ACPI PCI bus> on pcib1 >> pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1 >> pci2: <ACPI PCI bus> on pcib2 >> pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2 >> pci3: <ACPI PCI bus> on pcib3 >> pcib4: <PCI-PCI bridge> at device 0.0 on pci3 >> pci4: <PCI bus> on pcib4 >> arcmsr0: <Areca SATA Host Adapter RAID Controller (RAID6 capable) >>> mem 0xc3d00000-0xc3d00fff,0xc3000000-0xc33fffff irq 18 at device 14.0 >> on pci4 >> ARECA RAID ADAPTER0: Driver Version 1.20.00.14 2007-2-05 >> ARECA RAID ADAPTER0: FIRMWARE VERSION V1.43 2007-4-17 >> arcmsr0: [ITHREAD] >> pcib5: <PCI-PCI bridge> at device 0.2 on pci3 >> pci5: <PCI bus> on pcib5 >> pcib6: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci2 >> pci6: <ACPI PCI bus> on pcib6 >> em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port >> 0x2020-0x203f mem 0xc3c20000-0xc3c3ffff,0xc3800000-0xc3bfffff irq 18 at >> device 0.0 on pci6 >> em0: Using MSI interrupt >> em0: Ethernet address: 00:15:17:30:94:30 >> em0: [FILTER] >> em1: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port >> 0x2000-0x201f mem 0xc3c00000-0xc3c1ffff,0xc3400000-0xc37fffff irq 19 at >> device 0.1 on pci6 >> em1: Using MSI interrupt >> em1: Ethernet address: 00:15:17:30:94:31 >> em1: [FILTER] >> pcib7: <ACPI PCI-PCI bridge> at device 0.3 on pci1 >> pci7: <ACPI PCI bus> on pcib7 >> pcib8: <PCI-PCI bridge> at device 3.0 on pci0 >> pci8: <PCI bus> on pcib8 >> pcib9: <ACPI PCI-PCI bridge> at device 4.0 on pci0 >> pci9: <ACPI PCI bus> on pcib9 >> vgapci0: <VGA-compatible display> port 0x1000-0x107f mem >> 0xc2000000-0xc2ffffff,0xb0000000-0xbfffffff,0xc0000000-0xc1ffffff irq 16 >> at device 0.0 on pci9 >> pcib10: <ACPI PCI-PCI bridge> at device 5.0 on pci0 >> pci10: <ACPI PCI bus> on pcib10 >> pcib11: <ACPI PCI-PCI bridge> at device 6.0 on pci0 >> pci11: <ACPI PCI bus> on pcib11 >> pcib12: <PCI-PCI bridge> at device 7.0 on pci0 >> pci12: <PCI bus> on pcib12 >> pci0: <base peripheral> at device 8.0 (no driver attached) >> pci0: <multimedia> at device 27.0 (no driver attached) >> pcib13: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 >> pci13: <ACPI PCI bus> on pcib13 >> uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port >> 0x3080-0x309f irq 23 at device 29.0 on pci0 >> uhci0: [GIANT-LOCKED] >> uhci0: [ITHREAD] >> usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0 >> usb0: USB revision 1.0 >> uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 >> uhub0: 2 ports with 2 removable, self powered >> uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port >> 0x3060-0x307f irq 22 at device 29.1 on pci0 >> uhci1: [GIANT-LOCKED] >> uhci1: [ITHREAD] >> usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1 >> usb1: USB revision 1.0 >> uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 >> uhub1: 2 ports with 2 removable, self powered >> uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port >> 0x3040-0x305f irq 23 at device 29.2 on pci0 >> uhci2: [GIANT-LOCKED] >> uhci2: [ITHREAD] >> usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2 >> usb2: USB revision 1.0 >> uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 >> uhub2: 2 ports with 2 removable, self powered >> uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port >> 0x3020-0x303f irq 22 at device 29.3 on pci0 >> uhci3: [GIANT-LOCKED] >> uhci3: [ITHREAD] >> usb3: <Intel 631XESB/632XESB/3100 USB controller USB-4> on uhci3 >> usb3: USB revision 1.0 >> uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 >> uhub3: 2 ports with 2 removable, self powered >> ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xc3f04400-0xc3f047ff irq >> 23 at device 29.7 on pci0 >> ehci0: [GIANT-LOCKED] >> ehci0: [ITHREAD] >> usb4: EHCI version 1.0 >> usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 >> usb4: <Intel 63XXESB USB 2.0 controller> on ehci0 >> usb4: USB revision 2.0 >> uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4 >> uhub4: 8 ports with 8 removable, self powered >> pcib14: <ACPI PCI-PCI bridge> at device 30.0 on pci0 >> pci14: <ACPI PCI bus> on pcib14 >> isab0: <PCI-ISA bridge> at device 31.0 on pci0 >> isa0: <ISA bus> on isab0 >> atapci0: <Intel 63XXESB2 UDMA100 controller> port >> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30b0-0x30bf irq 20 at device 31.1 >> on pci0 >> ata0: <ATA channel 0> on atapci0 >> ata0: [ITHREAD] >> ata1: <ATA channel 1> on atapci0 >> ata1: [ITHREAD] >> atapci1: <Intel 63XXESB2 SATA300 controller> port >> 0x30c8-0x30cf,0x30e4-0x30e7,0x30c0-0x30c7,0x30e0-0x30e3,0x30a0-0x30af >> mem 0xc3f04000-0xc3f043ff irq 20 at device 31.2 on pci0 >> atapci1: [ITHREAD] >> ata2: <ATA channel 0> on atapci1 >> ata2: [ITHREAD] >> ata3: <ATA channel 1> on atapci1 >> ata3: [ITHREAD] >> pci0: <serial bus, SMBus> at device 31.3 (no driver attached) >> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 >> atkbd0: <AT Keyboard> irq 1 on atkbdc0 >> kbd0 at atkbd0 >> atkbd0: [GIANT-LOCKED] >> atkbd0: [ITHREAD] >> sio0: configured irq 4 not in bitmap of probed irqs 0 >> sio0: port may not be enabled >> sio0: configured irq 4 not in bitmap of probed irqs 0 >> sio0: port may not be enabled >> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on >> acpi0 >> sio0: type 16550A, console >> sio0: [FILTER] >> sio1: configured irq 3 not in bitmap of probed irqs 0 >> sio1: port may not be enabled >> sio1: configured irq 3 not in bitmap of probed irqs 0 >> sio1: port may not be enabled >> sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 >> sio1: type 16550A >> sio1: [FILTER] >> orm0: <ISA Option ROMs> at iomem >> 0xcd000-0xcdfff,0xce000-0xcefff,0xcf000-0xcffff on isa0 >> ppc0: cannot reserve I/O port range >> sc0: <System console> at flags 0x100 on isa0 >> sc0: VGA <16 virtual consoles, flags=0x300> >> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >> Timecounters tick every 1.000 msec >> ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding >> disabled, default to accept, logging limited to 100 packets/entry by default >> Waiting 5 seconds for SCSI devices to settle >> acd0: DVDROM <HL-DT-STDVD-ROM GDR8161B/0100> at ata0-master UDMA33 >> da0 at arcmsr0 bus 0 target 0 lun 0 >> da0: <Areca ARC-1230-VOL#00 R001> Fixed Direct Access SCSI-5 device >> da0: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit) >> da0: 238418MB (488281088 512 byte sectors: 255H 63S/T 30394C) >> da1 at arcmsr0 bus 0 target 0 lun 1 >> da1: <Seagate ST3750640NS R001> Fixed Direct Access SCSI-5 device >> da1: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit) >> da1: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) >> da2 at arcmsr0 bus 0 target 0 lun 2 >> da2: <Seagate ST3750640NS R001> Fixed Direct Access SCSI-5 device >> da2: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit) >> da2: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) >> da3 at arcmsr0 bus 0 target 0 lun 3 >> da3: <Seagate ST3750640NS R001> Fixed Direct Access SCSI-5 device >> da3: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit) >> da3: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) >> da4 at arcmsr0 bus 0 target 0 lun 4 >> da4: <Seagate ST3750640NS R001> Fixed Direct Access SCSI-5 device >> da4: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit) >> da4: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) >> da5 at arcmsr0 bus 0 target 0 lun 5 >> da5: <Seagate ST3750640NS R001> Fixed Direct Access SCSI-5 device >> da5: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit) >> da5: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) >> da6 at arcmsr0 bus 0 target 0 lun 6 >> da6: <Seagate ST3750640NS R001> Fixed Direct Access SCSI-5 device >> da6: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit) >> da6: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) >> da7 at arcmsr0 bus 0 target 0 lun 7 >> da7: <Seagate ST3750640NS R001> Fixed Direct Access SCSI-5 device >> da7: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit) >> da7: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) >> lapic1: Forcing LINT1 to edge trigger >> SMP: AP CPU #1 Launched! >> WARNING: WITNESS option enabled, expect reduced performance. >> WARNING: DIAGNOSTIC option enabled, expect reduced performance. >> Trying to mount root from ufs:/dev/da0s1a >> WARNING: ZFS is considered to be an experimental feature in FreeBSD. >> ZFS filesystem version 6 >> ZFS storage pool version 6 >> em1: Hardware Initialization Failed >> em1: Unable to initialize the hardware >> Expensive timeout(9) function: 0xffffffff80258fe0(0xffffff00012fc000) >> 0.008566172 s >> em1: link state changed to UP >> em1: link state changed to DOWN >> em1: link state changed to UP >> Expensive timeout(9) function: 0xffffffff80507ae0(0) 0.105003251 s >> Expensive timeout(9) function: 0xffffffff80397260(0) 0.372032111 s >> Expensive timeout(9) function: 0xffffffff80469350(0xffffff0069b5f888) >> 0.403952336 s >> >> >> my ipfw rules: >> pipe 2 config bw 600Mbit/s queue 50KBytes >> queue 201 config pipe 2 weight 1 mask dst-ip 0x0000000f queue 50 >> queue 210 config pipe 2 weight 50 mask dst-ip 0x0000000f queue 50 >> >> >> add 100 permit ip from any to any via lo0 >> add 200 deny ip from any to 127.0.0.0/8 >> >> # Speedup Established >> add 5001 skipto 8000 ip from 82.220.2.0/24 to 212.101.0.0/19 via em1 >> add 6000 queue 210 ip from any to 212.101.0.0/19 out xmit em1 >> add 6001 skipto 8000 ip from any to 212.101.0.0/19 out xmit em1 >> add 6002 queue 210 ip from any to 212.41.65.0/18 out xmit em1 >> add 6003 skipto 8000 ip from any to 212.41.65.0/18 out xmit em1 >> add 6004 queue 210 ip from any to 82.220.0.0/18 out xmit em1 >> add 6005 skipto 8000 ip from any to 82.220.0.0/18 out xmit em1 >> add 6100 queue 201 ip from any to any out xmit em1 >> >> add 8000 permit tcp from any to any via em1 established >> >> # ICMP >> add 11700 permit icmp from any to any via em1 icmptype 0,3,4,8,11,12 >> >> # Traceroute >> add 1800 allow udp from any 30000-60000 to me 30000-60000 via em0 >> >> >> # SSH (external connections are allowed for portsnap maintainer) >> add 11900 allow ip from me to any ssh setup >> add 11901 allow ip from any to me ssh setup >> >> # HTTP OUT >> add 11910 permit tcp from me to any 80 setup via em1 >> >> # SMTP >> add 12100 permit tcp from me to 212.101.0.0/19 25 setup via em1 >> add 12110 allow tcp from me to any dst-port smtp via em1 setup >> >> # DNS UDP SolNet >> add 21100 permit udp from 212.101.0.10 domain to me recv em1 >> add 21101 permit udp from me to 212.101.0.10 domain out xmit em1 >> add 21110 permit udp from 212.101.4.253 domain to me recv em1 >> add 21111 permit udp from me to 212.101.4.253 domain out xmit em1 >> add 21120 permit udp from 212.101.4.251 domain to me recv em1 >> add 21121 permit udp from me to 212.101.4.251 domain out xmit em1 >> >> # NTP >> add 21440 permit udp from me ntp to 212.101.0.0/19 ntp out xmit em1 >> add 21445 permit udp from 224.0.1.1 ntp to 212.101.0.0/19 ntp out xmit em1 >> add 21450 permit udp from 212.101.0.0/19 ntp to me ntp recv em1 >> add 21460 permit udp from 212.101.0.0/19 ntp to 224.0.1.1 ntp recv em1 >> add 21470 permit udp from me ntp to 224.0.1.1 ntp out xmit em1 >> >> >> # WEB >> add 22250 permit tcp from any to 212.101.4.241 80 setup via em1 limit >> src-addr 4 >> add 22251 permit tcp from any to 212.101.4.241 443 setup via em1 limit >> src-addr 4 >> add 22253 permit tcp from 212.101.4.241 to any 1024-65535 setup via em1 >> >> >> # FTP >> add 22300 permit tcp from any to 212.101.4.244 21 setup via em1 limit >> src-addr 4 >> add 22301 permit tcp from 212.101.4.244 to any 21 setup via em1 >> add 22302 permit tcp from 212.101.4.244 20 to any 1024-65535 setup via em1 >> add 22320 permit tcp from any 20 to 212.101.4.244 1024-65535 setup via em1 >> add 22340 permit tcp from any to 212.101.4.244 49152-65535 setup via em1 >> >> # RSYNC >> add 22400 permit tcp from 212.101.4.244 to any rsync setup via em1 >> add 22410 permit tcp from any to me rsync setup via em1 >> >> # CVSUPD >> add 22500 permit tcp from 212.101.4.244 to any cvsup setup via em1 >> add 22510 permit tcp from any to me cvsup setup via em1 >> >> # >> # NO WINDOWS >> # >> add 30000 deny udp from any to any 137 via em1 >> >> # Internal Interface >> add 62000 allow tcp from 212.101.0.0/24 to any 22,23,25 via em0 setup >> add 62010 allow tcp from 212.101.1.0/24 to any 22,23,25 via em0 setup >> add 62020 allow tcp from 212.101.4.0/24 to any 22,25 via em0 setup >> add 63000 reset tcp from any to any 22,23,25,3306,111 via em0 setup >> add 65000 allow ip from any to any via em0 >> >> # F*** off the rest >> add 65500 deny log ip from any to any >> >> If i load the ipfw rules i see: >> >> lock order reversal: >> 1st 0xffffffff80839448 PFil hook read/write mutex (PFil hook read/write >> mutex) @ /usr/src/sys/net/pfil.c:73 >> 2nd 0xffffffff80838440 in_multi_mtx (in_multi_mtx) @ >> /usr/src/sys/netinet/ip_output.c:302 >> KDB: stack backtrace: >> db_trace_self_wrapper() at db_trace_self_wrapper+0x2a >> witness_checkorder() at witness_checkorder+0x605 >> _mtx_lock_flags() at _mtx_lock_flags+0x75 >> ip_output() at ip_output+0x570 >> dummynet_send() at dummynet_send+0x13f >> dummynet_io() at dummynet_io+0x322 >> ipfw_check_out() at ipfw_check_out+0x20a >> pfil_run_hooks() at pfil_run_hooks+0xbc >> ip_output() at ip_output+0x372 >> udp_send() at udp_send+0x350 >> sosend_dgram() at sosend_dgram+0x20f >> kern_sendit() at kern_sendit+0x122 >> sendit() at sendit+0xdc >> sendto() at sendto+0x4d >> syscall() at syscall+0x1f6 >> Xfast_syscall() at Xfast_syscall+0xab >> --- syscall (133, FreeBSD ELF64, sendto), rip = 0x800bebc8c, rsp = >> 0x7fffffffe6c8, rbp = 0x551420 --- >> Expensive timeout(9) function: 0xffffffff80469350(0xffffff004696e000) >> 0.530255650 s >> >> >> FreeBSD is installed on ufs but I have a zfs pool for my data. >> Filesystem Size Used Avail Capacity Mounted on >> /dev/da0s1a 496M 356M 100M 78% / >> devfs 1.0K 1.0K 0B 100% /dev >> /dev/da0s1g 169G 4.0K 155G 0% /disk1 >> /dev/da0s1f 3.9G 902K 3.6G 0% /tmp >> /dev/da0s1e 29G 3.9G 23G 15% /usr >> /dev/da0s1d 19G 4.0G 14G 22% /var >> pool 1.2T 0B 1.2T 0% /usr/local/data >> pool/cvsup 1.2T 5.1G 1.2T 0% /usr/local/data/cvsup >> pool/ftp 3.3T 2.2T 1.2T 65% /usr/local/data/ftp >> pool/portsnap 1.2T 591M 1.2T 0% /usr/local/data/portsnap >> pool/www 1.2T 78M 1.2T 0% /usr/local/data/www >> >> Any help? >> >> Best regards, >> Thomas >> _______________________________________________ >> freebsd-current@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-current >> To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org" > > Please try this patch: > http://www.freebsd.org/cgi/query-pr.cgi?prp=113548-3-diff > and report does it help or not. Thank you. It looks good. No freeze so far with your patch. I hope it will get into 7.0. Best regards, Thomas
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?475E477A.80802>