Date: Mon, 2 Jul 2001 22:22:28 -0700 From: John Reynolds <jjreynold@home.com> To: stable@freebsd.org Cc: Garance A Drosihn <drosih@rpi.edu>, mhall@nms.fnc.fujitsu.com, ohartman@klima.physik.uni-mainz.de Subject: Re: Hard lockups since cvsup'ing Jul 1st. Help! Message-ID: <15169.22164.328953.5388@whale.home-net>
next in thread | raw e-mail | index | archive | help
--1hgWwvRNzw
Content-Type: text/plain; charset=us-ascii
Content-Description: message body text
Content-Transfer-Encoding: 7bit
> [ I said ]:
> I CVSup'ed about 3 hours ago and have built world and am in the process of
> building some kernels up and will definitely investigate further
> tonight. Thanks for the data point,
Well, something has definitely gone south in the SMP world at least for my box
and others. Here are some more experiments and some verbose dmesg outputs for
people to gander at.
Again, a summary of the box--An Abit BP6 dual 550Mhz Celeron. BX, 128Mb RAM,
NCR scsi card, running -stable as of Jun 2 (no problems noticed in this
kernel).
I CVSuped the code base as of 10:43am this (Monday) morning and built world and
built a kernel using the same config file as the current functioning
kernel. Also built a kernel with that same file sans SMP.
I manually copied the two kernels in to / and booted the new SMP
one. BZZZT. Instant lockup 2 seconds after I logged into the console to type
'sync'. The only thing that worked was hitting ALT-F? to get to a new virtual
console, but then no other keys worked. Ctrl-Alt-Del did not work. A hard reset
was required. I did capture the boot messages though in the syslog. Those are
attached.
Then I booted a single-proc version of the same kernel. NO PROBLEMS! Stable as
a rock. Its boot messages as well as my boot messages from the June 2 kernel
are also attached.
If nobody has any bright ideas from staring at these, then I'll start
performing a binary search CVSup'ing code from now until back to my "known
working" kernel to determine what broke. I diff'ed the attached dmesg outputs
and all I can see that's noticably different are interrupt numbers in various
places. [1st file = known good kernel, 2nd = broken SMP, 3rd = good UP ]
ps: I've got an Asus P2B-DS with two Pentium III's in there. I'm going to try
to boot a new kernel on that machine and will report back findings.
-Jr
--1hgWwvRNzw
Content-Type: text/plain
Content-Description: known good kernel boot messages
Content-Disposition: inline;
filename="known-good.txt"
Content-Transfer-Encoding: 7bit
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #20: Sat Jun 2 00:55:35 MST 2001
root@dolphin:/usr/obj/usr/src/sys/DOLPHIN
Calibrating clock(s) ... TSC clock: 534557679 Hz, i8254 clock: 1193209 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium II/Pentium II Xeon/Celeron (534.55-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134217728 (131072K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00361000 - 0x07ff7fff, 130641920 bytes (31895 pages)
avail memory = 127414272 (124428K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
SMP: CPU0 apic_initialize():
lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
bios32: Found BIOS32 Service Directory header at 0xc00faf90
bios32: Entry = 0xfb410 (c00fb410) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xb440
pnpbios: Found PnP BIOS data at 0xc00fc010
pnpbios: Entry = f0000:c038 Rev = 1.0
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc0338000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
Math emulator present
SMP: CPU0 bsp_apic_configure():
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000010 SVR: 0x000001ff
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x7190, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base e0000000, size 26
found-> vendor=0x8086, dev=0x7191, revid=0x03
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x8086, dev=0x7110, revid=0x02
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7111, revid=0x01
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000f000, size 4
found-> vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=5
map[20]: type 1, range 32, base 0000c000, size 5
found-> vendor=0x8086, dev=0x7113, revid=0x02
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[90]: type 1, range 32, base 00005000, size 4
IOAPIC #0 intpin 19 -> irq 2
Freeing (NOT implemented) redirected PCI irq 5.
found-> vendor=0x8086, dev=0x1229, revid=0x02
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=2
map[10]: type 1, range 32, base ec202000, size 12
map[14]: type 1, range 32, base 0000c400, size 5
map[18]: type 1, range 32, base ec100000, size 20
IOAPIC #0 intpin 18 -> irq 5
Freeing (NOT implemented) redirected PCI irq 11.
found-> vendor=0x8086, dev=0x1229, revid=0x02
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base ec203000, size 12
map[14]: type 1, range 32, base 0000c800, size 5
map[18]: type 1, range 32, base ec000000, size 20
IOAPIC #0 intpin 16 -> irq 10
found-> vendor=0x1000, dev=0x000f, revid=0x26
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base 0000cc00, size 8
map[14]: type 1, range 32, base ec200000, size 8
map[18]: type 1, range 32, base ec201000, size 12
Freeing (NOT implemented) redirected PCI irq 11.
found-> vendor=0x1103, dev=0x0004, revid=0x01
class=01-80-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base 0000d000, size 3
map[14]: type 1, range 32, base 0000d400, size 2
map[20]: type 1, range 32, base 0000d800, size 8
Freeing (NOT implemented) redirected PCI irq 11.
found-> vendor=0x1103, dev=0x0004, revid=0x01
class=01-80-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=b, irq=5
map[10]: type 1, range 32, base 0000dc00, size 3
map[14]: type 1, range 32, base 0000e000, size 2
map[20]: type 1, range 32, base 0000e400, size 8
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
found-> vendor=0x10de, dev=0x002d, revid=0x15
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base e4000000, size 24
map[14]: type 1, range 32, base e6000000, size 25
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva Ultra Vanta TNT2 graphics accelerator> (vendor=0x10de, dev=0x002d) at 0.0 irq 10
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000
ata0: mask=03 status0=50 status1=00
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe a=00 b=00
ata0-slave: ATAPI probe a=00 b=00
ata0: mask=03 status0=50 status1=00
ata0-master: ATA probe a=01 b=a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008
ata1: mask=03 status0=2b status1=2b
ata1: mask=03 ostat0=2a ostat2=2a
ata1-master: ATAPI probe a=29 b=29
ata1-slave: ATAPI probe a=28 b=28
ata1: mask=03 status0=29 status1=28
ata1-master: ATA probe a=0f b=0f
ata1-slave: ATA probe a=0f b=0f
ata1: devices=00
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xc000-0xc01f irq 5 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Timecounter "PIIX" frequency 3579545 Hz
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xc400-0xc41f mem 0xec100000-0xec1fffff,0xec202000-0xec202fff irq 2 at device 9.0 on pci0
fxp0: using memory space register mapping
fxp0: Ethernet address 00:a0:c9:95:e1:0e
fxp0: PCI IDs: 8086 1229 8086 0001
fxp0: Chip Type: 1
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xc800-0xc81f mem 0xec000000-0xec0fffff,0xec203000-0xec203fff irq 5 at device 11.0 on pci0
fxp1: using memory space register mapping
using shared irq5.
fxp1: Ethernet address 00:a0:c9:5a:a4:c7
fxp1: PCI IDs: 8086 1229 8086 0001
fxp1: Chip Type: 1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp1 attached
sym0: <875> port 0xcc00-0xccff mem 0xec201000-0xec201fff,0xec200000-0xec2000ff irq 10 at device 15.0 on pci0
sym0: Tekram NVRAM, ID 7, Fast-20, SE, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
atapci1: <HighPoint HPT366 ATA66 controller> port 0xd800-0xd8ff,0xd400-0xd403,0xd000-0xd007 irq 5 at device 19.0 on pci0
ata2: iobase=0xd000 altiobase=0xd402 bmaddr=0xd800
ata2: mask=03 status0=20 status1=30
ata2: mask=03 ostat0=20 ostat2=30
ata2-master: ATAPI probe a=20 b=20
ata2-slave: ATAPI probe a=30 b=30
ata2: mask=03 status0=20 status1=30
ata2-master: ATA probe a=25 b=25
ata2-slave: ATA probe a=25 b=25
ata2: devices=00
ata2: at 0xd000 on atapci1
atapci2: <HighPoint HPT366 ATA66 controller> port 0xe400-0xe4ff,0xe000-0xe003,0xdc00-0xdc07 irq 5 at device 19.1 on pci0
ata-: ata2 exists, using next available unit number
ata3: iobase=0xdc00 altiobase=0xe002 bmaddr=0xe400
ata3: mask=03 status0=20 status1=30
ata3: mask=03 ostat0=20 ostat2=30
ata3-master: ATAPI probe a=20 b=20
ata3-slave: ATAPI probe a=30 b=30
ata3: mask=03 status0=20 status1=30
ata3-master: ATA probe a=25 b=25
ata3-slave: ATA probe a=25 b=25
ata3: devices=00
ata3: at 0xdc00 on atapci2
ata-: ata0 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata4 failed to probe at port 0x1f0 irq 14 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0-51, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:08, syncbits:08
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
isa_probe_children: probing PnP devices
SMP: enabled INTs: 1, 2, 3, 4, 5, 6, 7, 10, 12, 14, 15, apic_imen: 0x00ff2b01
BIOS Geometries:
0:03ff0f3f 0..1023=1024 cylinders, 0..15=16 heads, 1..63=63 sectors
1:0228fe3f 0..552=553 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
bpf: lo0 attached
IP packet filtering initialized, divert enabled, rule-based forwarding disabled, default to deny, logging disabled
bpf: ppp0 attached
new masks: bio 6800c060, tty 6300109a, net 670010be
bpf: sl0 attached
ata0-master: success setting UDMA2 on Intel chip
Creating DISK ad0
ad0: <Maxtor 51024U2/DA620CQ0> ATA-5 disk at ata0-master
ad0: 9765MB (19999728 sectors), 19841 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
ad0: 9765MB <Maxtor 51024U2> [19841/16/63] at ata0-master UDMA33
Waiting 4 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(probe3:sym0:0:3:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe3:sym0:0:3:0): ILLEGAL REQUEST asc:24,0
(probe3:sym0:0:3:0): Invalid field in CDB sks:c8,1
Creating DISK da0
Creating DISK cd0
pass0 at sym0 bus 0 target 3 lun 0
pass0: <TOSHIBA CD-ROM XM-5701TA 3136> Removable CD-ROM SCSI-2 device
pass0: 10.000MB/s transfers (10.000MHz, offset 8)
pass1 at sym0 bus 0 target 6 lun 0
pass1: <SEAGATE ST34555N 0930> Fixed Direct Access SCSI-2 device
pass1: Serial Number JKA217920D5CS8
pass1: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
no devsw (majdev=0 bootdev=0xa0200000)
Mounting root from ufs:/dev/ad0s1a
da0 at sym0 bus 0 target 6 lun 0
da0: <SEAGATE ST34555N 0930> Fixed Direct Access SCSI-2 device
da0: Serial Number JKA217920D5CS8
da0: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da0: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C)
(cd0:sym0:0:3:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:sym0:0:3:0): NOT READY asc:3a,0
(cd0:sym0:0:3:0): Medium not present
cd0 at sym0 bus 0 target 3 lun 0
cd0: <TOSHIBA CD-ROM XM-5701TA 3136> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present
ad0s1: type 0xa5, start 63, end = 19999727, size 19999665 : OK
--1hgWwvRNzw
Content-Type: text/plain
Content-Description: broken SMP kernel boot messages
Content-Disposition: inline;
filename="broken.txt"
Content-Transfer-Encoding: 7bit
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #0: Mon Jul 2 16:07:04 MST 2001
root@dolphin:/usr/obj/usr/src/sys/DOLPHIN
Calibrating clock(s) ... TSC clock: 534557223 Hz, i8254 clock: 1193208 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium II/Pentium II Xeon/Celeron (534.55-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134217728 (131072K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00365000 - 0x07ff7fff, 130625536 bytes (31891 pages)
avail memory = 127340544 (124356K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
SMP: CPU0 apic_initialize():
lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
bios32: Found BIOS32 Service Directory header at 0xc00faf90
bios32: Entry = 0xfb410 (c00fb410) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xb440
pnpbios: Found PnP BIOS data at 0xc00fc010
pnpbios: Entry = f0000:c038 Rev = 1.0
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel.new" at 0xc033c000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
Math emulator present
SMP: CPU0 bsp_apic_configure():
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000010 SVR: 0x000001ff
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x7190, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base e0000000, size 26
found-> vendor=0x8086, dev=0x7191, revid=0x03
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x8086, dev=0x7110, revid=0x02
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7111, revid=0x01
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000f000, size 4
found-> vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=5
map[20]: type 1, range 32, base 0000c000, size 5
found-> vendor=0x8086, dev=0x7113, revid=0x02
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[90]: type 1, range 32, base 00005000, size 4
IOAPIC #0 intpin 19 -> irq 2
Freeing (NOT implemented) redirected PCI irq 5.
found-> vendor=0x8086, dev=0x1229, revid=0x02
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=2
map[10]: type 1, range 32, base ec202000, size 12
map[14]: type 1, range 32, base 0000c400, size 5
map[18]: type 1, range 32, base ec100000, size 20
IOAPIC #0 intpin 18 -> irq 5
Freeing (NOT implemented) redirected PCI irq 11.
found-> vendor=0x8086, dev=0x1229, revid=0x02
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base ec203000, size 12
map[14]: type 1, range 32, base 0000c800, size 5
map[18]: type 1, range 32, base ec000000, size 20
IOAPIC #0 intpin 16 -> irq 10
found-> vendor=0x1000, dev=0x000f, revid=0x26
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base 0000cc00, size 8
map[14]: type 1, range 32, base ec200000, size 8
map[18]: type 1, range 32, base ec201000, size 12
Freeing (NOT implemented) redirected PCI irq 11.
found-> vendor=0x1103, dev=0x0004, revid=0x01
class=01-80-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base 0000d000, size 3
map[14]: type 1, range 32, base 0000d400, size 2
map[20]: type 1, range 32, base 0000d800, size 8
Freeing (NOT implemented) redirected PCI irq 11.
found-> vendor=0x1103, dev=0x0004, revid=0x01
class=01-80-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=b, irq=5
map[10]: type 1, range 32, base 0000dc00, size 3
map[14]: type 1, range 32, base 0000e000, size 2
map[20]: type 1, range 32, base 0000e400, size 8
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
found-> vendor=0x10de, dev=0x002d, revid=0x15
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base e4000000, size 24
map[14]: type 1, range 32, base e6000000, size 25
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva Ultra Vanta TNT2 graphics accelerator> (vendor=0x10de, dev=0x002d) at 0.0 irq 10
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000
ata0: mask=03 status0=50 status1=00
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe a=00 b=00
ata0-slave: ATAPI probe a=00 b=00
ata0: mask=03 status0=50 status1=00
ata0-master: ATA probe a=01 b=a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008
ata1: mask=03 status0=2a status1=2a
ata1: mask=03 ostat0=29 ostat2=29
ata1-master: ATAPI probe a=27 b=27
ata1-slave: ATAPI probe a=26 b=26
ata1: mask=03 status0=27 status1=26
ata1-master: ATA probe a=0f b=0f
ata1-slave: ATA probe a=0f b=0f
ata1: devices=00
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xc000-0xc01f irq 5 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Timecounter "PIIX" frequency 3579545 Hz
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xc400-0xc41f mem 0xec100000-0xec1fffff,0xec202000-0xec202fff irq 2 at device 9.0 on pci0
fxp0: using memory space register mapping
fxp0: Ethernet address 00:a0:c9:95:e1:0e
fxp0: PCI IDs: 8086 1229 8086 0001 0002
fxp0: Chip Type: 1
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xc800-0xc81f mem 0xec000000-0xec0fffff,0xec203000-0xec203fff irq 5 at device 11.0 on pci0
fxp1: using memory space register mapping
using shared irq5.
fxp1: Ethernet address 00:a0:c9:5a:a4:c7
fxp1: PCI IDs: 8086 1229 8086 0001 0002
fxp1: Chip Type: 1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp1 attached
sym0: <875> port 0xcc00-0xccff mem 0xec201000-0xec201fff,0xec200000-0xec2000ff irq 10 at device 15.0 on pci0
sym0: Tekram NVRAM, ID 7, Fast-20, SE, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
atapci1: <HighPoint HPT366 ATA66 controller> port 0xd800-0xd8ff,0xd400-0xd403,0xd000-0xd007 irq 5 at device 19.0 on pci0
ata2: iobase=0xd000 altiobase=0xd402 bmaddr=0xd800
ata2: mask=03 status0=20 status1=30
ata2: mask=03 ostat0=20 ostat2=30
ata2-master: ATAPI probe a=20 b=20
ata2-slave: ATAPI probe a=30 b=30
ata2: mask=03 status0=20 status1=30
ata2-master: ATA probe a=25 b=25
ata2-slave: ATA probe a=25 b=25
ata2: devices=00
ata2: at 0xd000 on atapci1
atapci2: <HighPoint HPT366 ATA66 controller> port 0xe400-0xe4ff,0xe000-0xe003,0xdc00-0xdc07 irq 5 at device 19.1 on pci0
ata-: ata2 exists, using next available unit number
ata3: iobase=0xdc00 altiobase=0xe002 bmaddr=0xe400
ata3: mask=03 status0=20 status1=30
ata3: mask=03 ostat0=20 ostat2=30
ata3-master: ATAPI probe a=20 b=20
ata3-slave: ATAPI probe a=30 b=30
ata3: mask=03 status0=20 status1=30
ata3-master: ATA probe a=25 b=25
ata3-slave: ATA probe a=25 b=25
ata3: devices=00
ata3: at 0xdc00 on atapci2
ata-: ata0 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc8fff,0xcc000-0xcdfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata4 failed to probe at port 0x1f0 irq 14 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0-51, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:08, syncbits:08
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
isa_probe_children: probing PnP devices
SMP: enabled INTs: 1, 2, 3, 4, 5, 6, 7, 10, 12, 14, 15, apic_imen: 0x00ff2b01
BIOS Geometries:
0:03ff0f3f 0..1023=1024 cylinders, 0..15=16 heads, 1..63=63 sectors
1:0228fe3f 0..552=553 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
bpf: lo0 attached
IP packet filtering initialized, divert enabled, rule-based forwarding disabled, default to deny, logging disabled
bpf: ppp0 attached
new masks: bio 6800c060, tty 6300109a, net 670010be
bpf: sl0 attached
ata0-master: success setting UDMA2 on Intel chip
Creating DISK ad0
ad0: <Maxtor 51024U2/DA620CQ0> ATA-5 disk at ata0-master
ad0: 9765MB (19999728 sectors), 19841 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
ad0: 9765MB <Maxtor 51024U2> [19841/16/63] at ata0-master UDMA33
Waiting 4 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(probe3:sym0:0:3:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe3:sym0:0:3:0): ILLEGAL REQUEST asc:24,0
(probe3:sym0:0:3:0): Invalid field in CDB sks:c8,1
Creating DISK da0
Creating DISK cd0
pass0 at sym0 bus 0 target 3 lun 0
pass0: <TOSHIBA CD-ROM XM-5701TA 3136> Removable CD-ROM SCSI-2 device
pass0: 10.000MB/s transfers (10.000MHz, offset 8)
pass1 at sym0 bus 0 target 6 lun 0
pass1: <SEAGATE ST34555N 0930> Fixed Direct Access SCSI-2 device
pass1: Serial Number JKA217920D5CS8
pass1: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
Mounting root from ufs:/dev/ad0s1a
da0 at sym0 bus 0 target 6 lun 0
da0: <SEAGATE ST34555N 0930> Fixed Direct Access SCSI-2 device
da0: Serial Number JKA217920D5CS8
da0: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da0: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C)
(cd0:sym0:0:3:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:sym0:0:3:0): NOT READY asc:3a,0
(cd0:sym0:0:3:0): Medium not present
cd0 at sym0 bus 0 target 3 lun 0
cd0: <TOSHIBA CD-ROM XM-5701TA 3136> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present
ad0s1: type 0xa5, start 63, end = 19999727, size 19999665 : OK
WARNING: / was not properly dismounted
start_init: trying /sbin/init
da0s1: type 0xa5, start 63, end = 8883944, size 8883882 : OK
da0s1: type 0xa5, start 63, end = 8883944, size 8883882 : OK
Jul 2 21:31:48 dolphin named[171]: starting (/etc/namedb/named.conf). named 8.2.3-REL Sat Jun 2 00:10:48 MST 2001 root@dolphin:/usr/obj/usr/src/usr.sbin/named
--1hgWwvRNzw
Content-Type: text/plain
Content-Description: uniprocessor non-broken boot messages
Content-Disposition: inline;
filename="up.txt"
Content-Transfer-Encoding: 7bit
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #0: Mon Jul 2 16:17:58 MST 2001
root@dolphin:/usr/obj/usr/src/sys/DOLPHIN_UP
Calibrating clock(s) ... TSC clock: 534557479 Hz, i8254 clock: 1193208 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 534548119 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (534.55-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134217728 (131072K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00352000 - 0x07ff7fff, 130703360 bytes (31910 pages)
avail memory = 127418368 (124432K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00faf90
bios32: Entry = 0xfb410 (c00fb410) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xb440
pnpbios: Found PnP BIOS data at 0xc00fc010
pnpbios: Entry = f0000:c038 Rev = 1.0
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel.up.new" at 0xc032c000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x7190, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base e0000000, size 26
found-> vendor=0x8086, dev=0x7191, revid=0x03
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x8086, dev=0x7110, revid=0x02
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7111, revid=0x01
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000f000, size 4
found-> vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=5
map[20]: type 1, range 32, base 0000c000, size 5
found-> vendor=0x8086, dev=0x7113, revid=0x02
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[90]: type 1, range 32, base 00005000, size 4
found-> vendor=0x8086, dev=0x1229, revid=0x02
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base ec202000, size 12
map[14]: type 1, range 32, base 0000c400, size 5
map[18]: type 1, range 32, base ec100000, size 20
found-> vendor=0x8086, dev=0x1229, revid=0x02
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base ec203000, size 12
map[14]: type 1, range 32, base 0000c800, size 5
map[18]: type 1, range 32, base ec000000, size 20
found-> vendor=0x1000, dev=0x000f, revid=0x26
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base 0000cc00, size 8
map[14]: type 1, range 32, base ec200000, size 8
map[18]: type 1, range 32, base ec201000, size 12
found-> vendor=0x1103, dev=0x0004, revid=0x01
class=01-80-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 0000d000, size 3
map[14]: type 1, range 32, base 0000d400, size 2
map[20]: type 1, range 32, base 0000d800, size 8
found-> vendor=0x1103, dev=0x0004, revid=0x01
class=01-80-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=b, irq=11
map[10]: type 1, range 32, base 0000dc00, size 3
map[14]: type 1, range 32, base 0000e000, size 2
map[20]: type 1, range 32, base 0000e400, size 8
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
found-> vendor=0x10de, dev=0x002d, revid=0x15
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base e4000000, size 24
map[14]: type 1, range 32, base e6000000, size 25
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva Ultra Vanta TNT2 graphics accelerator> (vendor=0x10de, dev=0x002d) at 0.0 irq 10
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000
ata0: mask=03 status0=50 status1=00
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe a=00 b=00
ata0-slave: ATAPI probe a=00 b=00
ata0: mask=03 status0=50 status1=00
ata0-master: ATA probe a=01 b=a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008
ata1: mask=03 status0=2a status1=2a
ata1: mask=03 ostat0=29 ostat2=29
ata1-master: ATAPI probe a=28 b=28
ata1-slave: ATAPI probe a=27 b=27
ata1: mask=03 status0=28 status1=27
ata1-master: ATA probe a=0f b=0f
ata1-slave: ATA probe a=0f b=0f
ata1: devices=00
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xc000-0xc01f irq 5 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xc400-0xc41f mem 0xec100000-0xec1fffff,0xec202000-0xec202fff irq 5 at device 9.0 on pci0
fxp0: using memory space register mapping
using shared irq5.
fxp0: Ethernet address 00:a0:c9:95:e1:0e
fxp0: PCI IDs: 8086 1229 8086 0001 0002
fxp0: Chip Type: 1
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xc800-0xc81f mem 0xec000000-0xec0fffff,0xec203000-0xec203fff irq 11 at device 11.0 on pci0
fxp1: using memory space register mapping
fxp1: Ethernet address 00:a0:c9:5a:a4:c7
fxp1: PCI IDs: 8086 1229 8086 0001 0002
fxp1: Chip Type: 1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp1 attached
sym0: <875> port 0xcc00-0xccff mem 0xec201000-0xec201fff,0xec200000-0xec2000ff irq 10 at device 15.0 on pci0
sym0: Tekram NVRAM, ID 7, Fast-20, SE, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
atapci1: <HighPoint HPT366 ATA66 controller> port 0xd800-0xd8ff,0xd400-0xd403,0xd000-0xd007 irq 11 at device 19.0 on pci0
ata2: iobase=0xd000 altiobase=0xd402 bmaddr=0xd800
ata2: mask=03 status0=20 status1=30
ata2: mask=03 ostat0=20 ostat2=30
ata2-master: ATAPI probe a=20 b=20
ata2-slave: ATAPI probe a=30 b=30
ata2: mask=03 status0=20 status1=30
ata2-master: ATA probe a=25 b=25
ata2-slave: ATA probe a=25 b=25
ata2: devices=00
ata2: at 0xd000 on atapci1
using shared irq11.
atapci2: <HighPoint HPT366 ATA66 controller> port 0xe400-0xe4ff,0xe000-0xe003,0xdc00-0xdc07 irq 11 at device 19.1 on pci0
ata-: ata2 exists, using next available unit number
ata3: iobase=0xdc00 altiobase=0xe002 bmaddr=0xe400
ata3: mask=03 status0=20 status1=30
ata3: mask=03 ostat0=20 ostat2=30
ata3-master: ATAPI probe a=20 b=20
ata3-slave: ATAPI probe a=30 b=30
ata3: mask=03 status0=20 status1=30
ata3-master: ATA probe a=25 b=25
ata3-slave: ATA probe a=25 b=25
ata3: devices=00
ata3: at 0xdc00 on atapci2
ata-: ata0 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc8fff,0xcc000-0xcdfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata4 failed to probe at port 0x1f0 irq 14 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0-51, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:08, syncbits:08
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03ff0f3f 0..1023=1024 cylinders, 0..15=16 heads, 1..63=63 sectors
1:0228fe3f 0..552=553 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
IP packet filtering initialized, divert enabled, rule-based forwarding disabled, default to deny, logging disabled
bpf: ppp0 attached
new masks: bio 68c860, tty 63109a, net 6718ba
bpf: sl0 attached
ata0-master: success setting UDMA2 on Intel chip
Creating DISK ad0
ad0: <Maxtor 51024U2/DA620CQ0> ATA-5 disk at ata0-master
ad0: 9765MB (19999728 sectors), 19841 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
ad0: 9765MB <Maxtor 51024U2> [19841/16/63] at ata0-master UDMA33
Waiting 4 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(probe3:sym0:0:3:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe3:sym0:0:3:0): ILLEGAL REQUEST asc:24,0
(probe3:sym0:0:3:0): Invalid field in CDB sks:c8,1
Creating DISK da0
Creating DISK cd0
pass0 at sym0 bus 0 target 3 lun 0
pass0: <TOSHIBA CD-ROM XM-5701TA 3136> Removable CD-ROM SCSI-2 device
pass0: 10.000MB/s transfers (10.000MHz, offset 8)
pass1 at sym0 bus 0 target 6 lun 0
pass1: <SEAGATE ST34555N 0930> Fixed Direct Access SCSI-2 device
pass1: Serial Number JKA217920D5CS8
pass1: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
Mounting root from ufs:/dev/ad0s1a
da0 at sym0 bus 0 target 6 lun 0
da0: <SEAGATE ST34555N 0930> Fixed Direct Access SCSI-2 device
da0: Serial Number JKA217920D5CS8
da0: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da0: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C)
(cd0:sym0:0:3:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:sym0:0:3:0): NOT READY asc:3a,0
(cd0:sym0:0:3:0): Medium not present
cd0 at sym0 bus 0 target 3 lun 0
cd0: <TOSHIBA CD-ROM XM-5701TA 3136> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present
ad0s1: type 0xa5, start 63, end = 19999727, size 19999665 : OK
start_init: trying /sbin/init
da0s1: type 0xa5, start 63, end = 8883944, size 8883882 : OK
da0s1: type 0xa5, start 63, end = 8883944, size 8883882 : OK
--1hgWwvRNzw
Content-Type: text/plain; charset=us-ascii
Content-Description: .signature
Content-Transfer-Encoding: 7bit
--
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
John Reynolds Chandler Capabilities Engineering, CDS, Intel Corporation
jreynold@sedona.ch.intel.com My opinions are mine, not Intel's. Running
jjreynold@home.com FreeBSD 4.3-STABLE. FreeBSD: The Power to Serve.
http://www.reynoldsnet.org/ Come join us!!! @ http://www.FreeBSD.org/
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
--1hgWwvRNzw--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?15169.22164.328953.5388>