Date: Thu, 26 Jan 1995 15:22:36 +1100 (EST) From: John Herks <john@pyromania.apana.org.au> To: hackers@FreeBSD.org Subject: SyQuest works with FreeBSD 2.0R ! Message-ID: <199501260422.PAA00192@pyromania.apana.org.au>
next in thread | raw e-mail | index | archive | help
I have just installed a SyQuest 3.5" 270 MB removable SCSI drive in my FreeBSD 2.0R system. So far everything seems to work just fine! Here is my dmesg output -: pci0: scanning device 0..15, mechanism=2. chip0 <intel 82434LX pci cache memory controller> on pci0:0 ncr0 <ncr 53c810 scsi> int a (config) irq 9 on pci0:1 reg20: virtual=0xf507c000 physical=0xc0000000 ncr0: restart (scsi reset). ncr0 scanning for targets 0..6 (1.12) ncr0 waiting for scsi devices to settle ncr0 targ 0 lun 0: type 0(direct) fixed SCSI2 ncr0 targ 0 lun 0: <QUANTUM EMPIRE_1080S 1220> sd0(ncr0:0:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8. sd0: 1029MB (2109376 total sec), 2874 cyl, 8 head, 91 sec, bytes/sec 512 ncr0 targ 1 lun 0: type 0(direct) removable SCSI2 ncr0 targ 1 lun 0: <SyQuest SQ3270S 2_04> sd1(ncr0:1:0): 200ns (5 Mb/sec) offset 8. sd1: 256MB (524288 total sec), 3140 cyl, 2 head, 83 sec, bytes/sec 512 chip1 <intel 82378IB pci-isa bridge> on pci0:2 pci uses physical addresses from 0xc0000000 to 0xc0001000 -- \|/ (@ @) ----------------------------oOO--(_)--OOo----------------------------------- ``` ''' John Herks Communications Engineer Pyromania Unix Melbourne john@pyromania.apana.org.au Phone:+613-220-4757 ----------------------------------------------------------------------------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199501260422.PAA00192>