Date: Fri, 3 Mar 2006 16:27:57 -0500 From: "Joseph Turian" <turian@gmail.com> To: freebsd-questions@freebsd.org, questions@freebsd.org Subject: 6.1-BETA2 AMD64 boot only CD freezes at "module_register_init: MOD_LOAD (amr_linux, 0xffffffff805ebcc0, 0) error 6 Message-ID: <4dacb2560603031327l6a8befc3ie36afd89d54e9a72@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
I can't boot the 6.1-BETA2 AMD64 boot only CD. I have ACPI disabled in my BIOS, and I've tried both normal boot (option 1) and boot w ACPI disabled (option 2). Either way, the boot freezes with the following as the last few lines: Timecounter "TSC" frequency 2009156527 Hz quality 800 Timecounters tick every 1.000 msec 6.1-BETA2 install CD boot freezes at "module_register_init: MOD_LOAD (amr_linux, 0xffffffff805ebcc0, 0) error 6 This is slightly modified version of the error I get if I try to 6.0 boot d= isc. Here is some prior evidence I collected in an earlier version of this question on list.freebsd.questions. No one seems to know the answer, so I'm following up here with more information, in the hopes someone can help me out. (Sorry if anyone minds.) I need to install this system RSN and I'd prefer to use FreeBSD but the Linux install works fine in a pinch and FreeBSD won't even boot. Please help! Thanks, Joseph =3D=3D=3D=3D=3D From: "Joseph Turian" <tur...@gmail.com> Newsgroups: list.freebsd.questions Subject: 6.0 install CD boot freezes at "Timecounters tick every 1.000 msec= " Date: 2 Mar 2006 14:08:30 -0800 I'm having difficulty booting FreeBSD from the 6.0 install disc 1 for AMD64. I've also tried the boot disk, with the same problem. Basically, I'm trying to install on a clean system. Boot with ACPI *disabled* freezes with: Timecounter "TSC" frequency 2009156417 Hz quality 800 Timecounters tick every 1.000 msec I've googled this message and the recommendation is "boot with ACPI". But I disabled ACPI in the BIOS *and* I boot with option 2 (no ACPI), so that doesn't resolve the issue. Please help! I'd really like to install FreeBSD and give it a spin. I'd hate to be forced to install Linux just because it works no problem. Thanks, Joseph P.S. If you're interested in my hardware, here's the dmesg output from the gentoo livecd i686 2006.0 installer cd. I have a SATA disk and an IDE disk, maybe that's the issue? Linux version 2.6.15-gentoo-r5 (root@gravity) (gcc version 3.4.4 (Gentoo 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) #1 SMP Mon Feb 13 20:23:47 UTC 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007bfc0000 (usable) BIOS-e820: 000000007bfc0000 - 000000007bfce000 (ACPI data) BIOS-e820: 000000007bfce000 - 000000007bff0000 (ACPI NVS) BIOS-e820: 000000007bff0000 - 000000007c000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) 1087MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000ff780 On node 0 totalpages: 507840 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 278464 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP (v000 ACPIAM ) @ 0x000fb870 ACPI: RSDT (v001 A M I OEMRSDT 0x10000505 MSFT 0x00000097) @ 0x7bfc0000 ACPI: FADT (v002 A M I OEMFACP 0x10000505 MSFT 0x00000097) @ 0x7bfc0200 ACPI: MCFG (v001 A M I OEMMCFG 0x10000505 MSFT 0x00000097) @ 0x7bfc0400 ACPI: OEMB (v001 A M I AMI_OEM 0x10000505 MSFT 0x00000097) @ 0x7bfce040 ACPI: DSDT (v001 A0368 A0368001 0x00000001 INTL 0x02002026) @ 0x00000000 Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: TEMPLATE Product ID: CSM APIC at: 0xFEE00000 Processor #0 15:15 APIC version 16 I/O APIC #1 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 1 Allocating PCI resources starting at 80000000 (gap: 7c000000:82c00000) Built 1 zonelists Kernel command line: root=3D/dev/ram0 init=3D/linuxrc dokeymap looptype=3Dsquashfs loop=3D/image.squashfs cdroot initrd=3Dgentoo.igz vga= =3D791 splash=3Dsilent,theme:livecd-2006.0 CONSOLE=3D/dev/tty1 quiet BOOT_IMAGE=3Dgentoo mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 CPU 0 irqstacks, hard=3Dc0427000 soft=3Dc041f000 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 2009.214 MHz processor. Using tsc for high-res timesource Speakup v-2.00 CVS: Wed Dec 21 14:36:03 EST 2005 : initialized Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2005764k/2031360k available (2388k kernel code, 24456k reserved, 561k data, 220k init, 1113856k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4023.16 BogoMIPS (lpj=3D20115849) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000010 00000001 00000000 00000001 mtrr: v2.0 (20020519) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI-0311: *** Error: ns_search_and_enter: Bad character in ACPI Name: 43035350 ACPI-0292: *** Error: Looking up [0x43035350] (NON-ASCII) in namespace, AE_BAD_CHARACTER ACPI-0115: *** Error: acpi_load_tables: Could not load namespace: AE_BAD_CHARACTER ACPI-0123: *** Error: acpi_load_tables: Could not load tables: AE_BAD_CHARACTER ACPI: Unable to load the System Description Tables CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 02 Total of 1 processors activated (4023.16 BogoMIPS). ExtINT not setup in hardware but reported by MP table ENABLING IO-APIC IRQs ..TIMER: vector=3D0x31 apic1=3D0 pin1=3D2 apic2=3D0 pin2=3D0 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... ..... (found pin 0) ...works. Brought up 1 CPUs checking if image is initramfs... it is Freeing initrd memory: 3941k freed NET: Registered protocol family 16 EISA bus registered PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3D4 PCI: Using MMCONFIG ACPI: Subsystem revision 20050902 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled SCSI subsystem initialized PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:05.0 PCI: Transparent bridge - 0000:00:10.0 PCI: Using IRQ router default [10de/0260] at 0000:00:0a.0 PCI->APIC IRQ transform: 0000:00:05.0[A] -> IRQ 11 PCI->APIC IRQ transform: 0000:00:0a.1[A] -> IRQ 5 PCI->APIC IRQ transform: 0000:00:0b.0[A] -> IRQ 5 PCI->APIC IRQ transform: 0000:00:0b.1[B] -> IRQ 3 PCI->APIC IRQ transform: 0000:00:0e.0[A] -> IRQ 5 PCI->APIC IRQ transform: 0000:00:0f.0[A] -> IRQ 5 PCI->APIC IRQ transform: 0000:00:10.1[B] -> IRQ 5 PCI->APIC IRQ transform: 0000:00:14.0[A] -> IRQ 5 PCI->APIC IRQ transform: 0000:04:05.0[A] -> IRQ 5 PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:03.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:04.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:10.0 IO window: c000-cfff MEM window: faa00000-faafffff PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:00:04.0 to 64 PCI: Setting latency timer of device 0000:00:10.0 to 64 audit: initializing netlink socket (disabled) audit(1141365136.290:1): initialized highmem bounce pool size: 64 pages Squashfs 2.2 (released 2005/07/03) (C) 2002-2005 Phillip Lougher SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered PCI: Setting latency timer of device 0000:00:02.0 to 64 pcie_portdrv_probe->Dev[02fc:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie03] PCI: Setting latency timer of device 0000:00:03.0 to 64 pcie_portdrv_probe->Dev[02fd:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie03] PCI: Setting latency timer of device 0000:00:04.0 to 64 pcie_portdrv_probe->Dev[02fb:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie03] initialized device: /dev/synth, node ( MAJOR 10, MINOR 25 ) vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3072k, total 65536k vesafb: mode is 1024x768x16, linelength=3D2048, pages=3D1 vesafb: protected mode interface info at c000:d0c0 vesafb: scrolling: redraw vesafb: Truecolor: size=3D0:5:6:5, shift=3D0:11:5:0 vesafb: Mode is VGA compatible Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A mice: PS/2 mouse device common for all mice RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3Dxx NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0 NFORCE-MCP51: chipset revision 161 NFORCE-MCP51: not 100% native mode: will probe irqs later NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... input: AT Translated Set 2 keyboard as /class/input/input0 hda: WDC WD1600JB-00GVA0, ATA DISK drive input: ImPS/2 Logitech Wheel Mouse as /class/input/input1 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: ASUS DRW-1608P2S, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=3D19457/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2000kB Cache, UDMA(66) Uniform CD-ROM driver Revision: 3.20 md: md driver 0.90.3 MAX_MD_DEVS=3D256, MD_SB_DISKS=3D27 md: bitmap version 4.39 EISA: Probing bus 0 at eisa.0 EISA: Detected 0 cards. NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 6, 262144 bytes) TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode Freeing unused kernel memory: 220k freed usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Setting latency timer of device 0000:00:0b.1 to 64 ehci_hcd 0000:00:0b.1: EHCI Host Controller ehci_hcd 0000:00:0b.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:0b.1 ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0b.1: irq 3, io mem 0xfebdfc00 ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. irq 3: nobody cared (try booting with the "irqpoll" option) [<c0133a79>] [<c0133b40>] [<c0133561>] [<c01046b3>] =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D [<c0103132>] handlers: [<f8850e4a>] Disabling IRQ #3 USB Universal Host Controller Interface driver v2.3 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) PCI: Setting latency timer of device 0000:00:0b.0 to 64 ohci_hcd 0000:00:0b.0: OHCI Host Controller ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0b.0: irq 5, io mem 0xfebde000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected sl811: driver sl811-hcd, 19 May 2005 ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1313 $ Ben Collins <bcoll...@debian.org> ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=3D[5] MMIO=3D[faaff800-faafffff] Max Packet=3D[2048] sbp2: $Rev: 1306 $ Ben Collins <bcoll...@debian.org> ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=3D1) ieee1394: sbp2: Try serialize_io=3D0 for better performance libata version 1.20 loaded. sata_nv 0000:00:0e.0: version 0.8 PCI: Setting latency timer of device 0000:00:0e.0 to 64 ata1: SATA max UDMA/133 cmd 0xE800 ctl 0xE482 bmdma 0xE000 irq 5 ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE082 bmdma 0xE008 irq 5 ata1: dev 0 cfg 49:2f00 82:746b 83:7f61 84:4023 85:7469 86:3c41 87:4023 88:407f ata1: dev 0 ATA-7, max UDMA/133, 625142448 sectors: LBA48 ata1: dev 0 configured for UDMA/133 scsi0 : sata_nv ata2: no device found (phy stat 00000000) scsi1 : sata_nv Vendor: ATA Model: WDC WD3200KS-00P Rev: 21.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) SCSI device sda: drive cache: write back SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) SCSI device sda: drive cache: write back sda: unknown partition table sd 0:0:0:0: Attached scsi disk sda PCI: Setting latency timer of device 0000:00:0f.0 to 64 ata3: SATA max UDMA/133 cmd 0xDC00 ctl 0xD882 bmdma 0xD400 irq 5 ata4: SATA max UDMA/133 cmd 0xD800 ctl 0xD482 bmdma 0xD408 irq 5 ata3: no device found (phy stat 00000000) scsi2 : sata_nv ata4: no device found (phy stat 00000000) scsi3 : sata_nv ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000067efab] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-de...@redhat.com ReiserFS: sda: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sda VFS: Can't find ext3 filesystem on dev sda. VFS: Can't find an ext2 filesystem on dev sda. SQUASHFS error: Can't find a SQUASHFS superblock on sda FAT: bogus number of reserved sectors VFS: Can't find a valid FAT filesystem on dev sda. Unable to identify CD-ROM format. UDF-fs: No partition found (1) XFS: bad magic number XFS: SB validate failed ReiserFS: hda: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hda VFS: Can't find ext3 filesystem on dev hda. VFS: Can't find an ext2 filesystem on dev hda. SQUASHFS error: Can't find a SQUASHFS superblock on hda FAT: invalid media value (0x01) VFS: Can't find a valid FAT filesystem on dev hda. Unable to identify CD-ROM format. UDF-fs: No partition found (1) XFS: bad magic number XFS: SB validate failed ReiserFS: hda1: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hda1 VFS: Can't find ext3 filesystem on dev hda1. VFS: Can't find an ext2 filesystem on dev hda1. SQUASHFS error: Can't find a SQUASHFS superblock on hda1 FAT: bogus number of reserved sectors VFS: Can't find a valid FAT filesystem on dev hda1. Unable to identify CD-ROM format. UDF-fs: No partition found (1) XFS: bad magic number XFS: SB validate failed ReiserFS: hdc: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hdc VFS: Can't find ext3 filesystem on dev hdc. VFS: Can't find an ext2 filesystem on dev hdc. SQUASHFS error: Can't find a SQUASHFS superblock on hdc FAT: bogus number of reserved sectors VFS: Can't find a valid FAT filesystem on dev hdc. ISO 9660 Extensions: Microsoft Joliet Level 3 hdc: cdrom_decode_status: status=3D0x51 { DriveReady SeekComplete Error } hdc: cdrom_decode_status: error=3D0x40 { LastFailedSense=3D0x04 } ide: failed opcode was: unknown hdc: cdrom_decode_status: status=3D0x51 { DriveReady SeekComplete Error } hdc: cdrom_decode_status: error=3D0x40 { LastFailedSense=3D0x04 } ide: failed opcode was: unknown hdc: cdrom_decode_status: status=3D0x51 { DriveReady SeekComplete Error } hdc: cdrom_decode_status: error=3D0x40 { LastFailedSense=3D0x04 } ide: failed opcode was: unknown hdc: cdrom_decode_status: status=3D0x51 { DriveReady SeekComplete Error } hdc: cdrom_decode_status: error=3D0x40 { LastFailedSense=3D0x04 } ide: failed opcode was: unknown hdc: DMA disabled hdc: ide_intr: huh? expected NULL handler on exit hdc: ATAPI reset complete ISO 9660 Extensions: RRIP_1991A VFS: busy inodes on changed media. eth1394: $Rev: 1312 $ Ben Collins <bcoll...@debian.org> eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] parport0: irq 7 detected forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.48. PCI: Setting latency timer of device 0000:00:14.0 to 64 eth1: forcedeth.c: subsystem: 010de:cb84 bound to 0000:00:14.0 eth1: no link during initialization. eth1: no link during initialization. hdc: cdrom_decode_status: status=3D0x51 { DriveReady SeekComplete Error } hdc: cdrom_decode_status: error=3D0x40 { LastFailedSense=3D0x04 } ide: failed opcode was: unknown hdc: cdrom_decode_status: status=3D0x51 { DriveReady SeekComplete Error } hdc: cdrom_decode_status: error=3D0x40 { LastFailedSense=3D0x04 } ide: failed opcode was: unknown hdc: cdrom_decode_status: status=3D0x51 { DriveReady SeekComplete Error } hdc: cdrom_decode_status: error=3D0x40 { LastFailedSense=3D0x04 } ide: failed opcode was: unknown hdc: cdrom_decode_status: status=3D0x51 { DriveReady SeekComplete Error } hdc: cdrom_decode_status: error=3D0x40 { LastFailedSense=3D0x04 } ide: failed opcode was: unknown hdc: DMA disabled hdc: ide_intr: huh? expected NULL handler on exit hdc: ATAPI reset complete eth1: link up. VFS: busy inodes on changed media. fbsplash: console 0 using theme 'default' fbsplash: switched splash state to 'on' on console 0 NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver eth1: no IPv6 routers present
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4dacb2560603031327l6a8befc3ie36afd89d54e9a72>