Date: Sat, 4 Jan 2003 14:25:48 +0200 From: Igor Karpov <jc@minjust.gov.ua> To: freebsd-stable@freebsd.org Subject: Re: SCSI parity error; software- or hardware-problem? Message-ID: <20030104122548.GA27160@yard.minjust.gov.ua> In-Reply-To: <3.0.5.32.20030103145638.0093e470@pop.west.cox.net> References: <3.0.5.32.20030103145638.0093e470@pop.west.cox.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Jan 03, 2003 at 02:56:38PM +0000, R P wrote: > References: 20021124193031.GA18148@nvg.ntnu.no > On Nov 24, 2002 in freebsd-stable, taliesin@nvg.ntnu.no wrote: > >Then these turned up today: > > > >(da0:ahc0:0:0:0): parity error detected in Data-in phase. SEQADDR(0x56) > SCSIRATE(0x93) > >(da0:ahc0:0:0:0): parity error detected in Data-in phase. SEQADDR(0x8a) > SCSIRATE(0x93) > >(da0:ahc0:0:0:0): parity error detected in Data-in phase. SEQADDR(0x8a) > SCSIRATE(0x93) > >(da0:ahc0:0:0:0): READ(10). CDB: 28 0 0 8f df 22 0 0 70 0 > >(da0:ahc0:0:0:0): ABORTED COMMAND asc:48,0 > >(da0:ahc0:0:0:0): Initiator detected error message received > >(da1:ahc0:0:1:0): parity error detected in Data-in phase. SEQADDR(0x8b) > SCSIRATE(0x93) > >etc. > > I'm having the same problem since adding a second hard drive to the 68-pin > LVD/SE cable on an Adaptec 29160 on Dec. 20th. > > At this point, I believe it to be a software problem. I've posted a message about this problem a year ago in hardware@ The same story with Adaptec aic7896/97 Ultra2 SCSI adapter. Regards, -- Igor A. Karpov phone: +380(44)238-0624 Unix System Administrator Fat people are harder to kidnap. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030104122548.GA27160>