Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 25 Oct 2004 12:01:39 +0400
From:      Demin Alexander <support@spectrum.ru>
To:        ports-bugs@freebsd.org
Subject:   ports/72510 - current diff for update security/drweb
Message-ID:  <20041025120139.33a0cb79.support@spectrum.ru>

next in thread | raw e-mail | index | archive | help
diff -ruN security/drweb.orig/Makefile security/drweb/Makefile
--- security/drweb.orig/Makefile	Tue May 25 22:33:45 2004
+++ security/drweb/Makefile	Mon Oct 25 11:39:12 2004
@@ -6,11 +6,10 @@
 #
 
 PORTNAME=	drweb
-PORTVERSION=	4.31.4
+PORTVERSION=	4.32.1
 CATEGORIES=	security
-MASTER_SITES=	ftp://ftp.drweb.ru/pub/unix/generic/ \
-		ftp://ftp.drweb.ru/pub/unix/archive/ \
-		ftp://ftp.drweb.ru/pub/unix/archive/${PORTNAME}-${PORTVERSION}/
+MASTER_SITES=	ftp://ftp.drweb.ru/pub/unix/FreeBSD/49/ \
+		ftp://ftp.drweb.ru/pub/unix/FreeBSD/52/
 
 MAINTAINER=	petr@petrovich.kiev.ua
 COMMENT=	DrWeb antivirus suite
@@ -18,34 +17,38 @@
 ONLY_FOR_ARCHS=	i386
 NO_BUILD=	yes
 
+RUN_DEPENDS=	${LOCALBASE}/bin/wget:${PORTSDIR}/ftp/wget
+
 .include <bsd.port.pre.mk>
 
 .if ${OSVERSION} < 500000
-DISTNAME=	${PORTNAME}-${PORTVERSION}-freebsd4
+DISTNAME=	${PORTNAME}-${PORTVERSION}-freebsd49
 .else
-DISTNAME=	${PORTNAME}-${PORTVERSION}-freebsd5
+DISTNAME=	${PORTNAME}-${PORTVERSION}-freebsd52
 .endif
 
 WRKSRC=		${WRKDIR}/${DISTNAME}
 
 DRWEB_PREFIX=	${PREFIX}/${PORTNAME}
 
+pre-everything::
+	@${ECHO_MSG} ""
+	@${ECHO_MSG} "Warning!"
+	@${ECHO_MSG} "4.32* version not supported in the .key files of 4.31* version and older."
+	@${ECHO_MSG} "Press Ctrl-C if you want to stop installation."
+	@${ECHO_MSG} ""
+
 do-install:
 	-@${INSTALL} -dv -o ${BINOWN} -g ${BINGRP} ${DRWEB_PREFIX}
 	@cd ${DRWEB_PREFIX}; ${RM} -f drweb drwebd bases/* updates/*; ${MKDIR} updates
 	${TAR} -cf - -C ${WRKSRC}/usr/local/drweb . | \
 		${TAR} -xf - -C ${DRWEB_PREFIX} \
-		--exclude "*.key" \
 		--exclude "*.static" \
 		--exclude "update/update.pl*"
 	${TAR} -cf - -C ${WRKSRC}/var/drweb bases | \
 		${TAR} -xf - -C ${DRWEB_PREFIX}
 	${CHMOD} 755 ${DRWEB_PREFIX}/bases ${DRWEB_PREFIX}/doc \
 		${DRWEB_PREFIX}/lib ${DRWEB_PREFIX}/updates
-	${INSTALL_DATA} ${WRKSRC}/usr/local/drweb/drweb.key-distr \
-		${DRWEB_PREFIX}/drweb.key-distr
-	${INSTALL_DATA} ${WRKSRC}/usr/local/drweb/drwebd.key-distr \
-		${DRWEB_PREFIX}/drwebd.key-distr
 	${SED} 's#%INSTALL%#${DRWEB_PREFIX}#g' \
 		< ${WRKSRC}/usr/local/drweb/update/update.pl \
 		> ${DRWEB_PREFIX}/update/update.pl
@@ -54,26 +57,20 @@
 		< ${WRKSRC}/usr/local/etc/drweb/drweb32.ini \
 		> ${PREFIX}/drweb/drweb32.ini-distr
 	${RM} -f ${PREFIX}/bin/drweb
-	${SED} 's#%INSTALL%#${DRWEB_PREFIX}#g' \
-		< ${WRKSRC}/usr/local/etc/rc.d/00drwebd.sh \
-		> ${PREFIX}/etc/rc.d/00drwebd.sh
-	${CHMOD} 755 ${PREFIX}/etc/rc.d/00drwebd.sh
 	if [ ! -f ${PREFIX}/drweb/drweb32.ini ] ; then \
 		${CP} ${PREFIX}/drweb/drweb32.ini-distr \
 		      ${PREFIX}/drweb/drweb32.ini; \
 	fi
-	if [ ! -f ${DRWEB_PREFIX}/drweb.key ] ; then \
-		${CP} ${DRWEB_PREFIX}/drweb.key-distr \
-		      ${DRWEB_PREFIX}/drweb.key; \
-	fi
-	if [ ! -f ${DRWEB_PREFIX}/drwebd.key ] ; then \
-		${CP} ${DRWEB_PREFIX}/drwebd.key-distr \
-		      ${DRWEB_PREFIX}/drwebd.key; \
-	fi
 	${SED} 's#%INSTALL%#${DRWEB_PREFIX}#g' \
 		< ${FILESDIR}/drweb.sh \
 		> ${WRKDIR}/drweb
 	${INSTALL_SCRIPT} ${WRKDIR}/drweb ${PREFIX}/bin
+	${SED} 's#%INSTALL%#${DRWEB_PREFIX}#g' \
+                < ${WRKSRC}/usr/local/etc/rc.d/00.drwebd.sh \
+                > ${PREFIX}/etc/rc.d/00.drwebd.sh
+	${CHMOD} 750 ${PREFIX}/etc/rc.d/00.drwebd.sh
+	${INSTALL_DATA} ${WRKSRC}/usr/local/etc/drweb/email.ini \
+		${PREFIX}/drweb/email.ini-distr
 
 post-install:
 	PKG_PREFIX=${PREFIX} ${SH} ${PKGINSTALL} ${PKGNAME} POST-INSTALL
diff -ruN security/drweb.orig/distinfo security/drweb/distinfo
--- security/drweb.orig/distinfo	Tue May 18 02:58:53 2004
+++ security/drweb/distinfo	Thu Oct  7 18:20:13 2004
@@ -1,4 +1,4 @@
-MD5 (drweb-4.31.4-freebsd4.tar.gz) = 5732d40413ac4af4f38148d1260210d5
-SIZE (drweb-4.31.4-freebsd4.tar.gz) = 2137387
-MD5 (drweb-4.31.4-freebsd5.tar.gz) = 0c77bc4aec35cdb4de3376f138e214ed
-SIZE (drweb-4.31.4-freebsd5.tar.gz) = 2440504
+MD5 (drweb-4.32.1-freebsd49.tar.gz) = c8141853585fc01e0b9e74faa33ae0af
+SIZE (drweb-4.32.1-freebsd49.tar.gz) = 2304012
+MD5 (drweb-4.32.1-freebsd52.tar.gz) = e506f9eaf3660c762e5d9a07f2325acb
+SIZE (drweb-4.32.1-freebsd52.tar.gz) = 2631007
diff -ruN security/drweb.orig/files/patch-aa security/drweb/files/patch-aa
--- security/drweb.orig/files/patch-aa	Thu Mar 25 01:04:13 2004
+++ security/drweb/files/patch-aa	Thu Oct  7 17:23:51 2004
@@ -1,6 +1,6 @@
---- usr/local/etc/drweb/drweb32.ini.orig	Sat Mar  6 04:06:07 2004
-+++ usr/local/etc/drweb/drweb32.ini	Sat Mar  6 21:58:17 2004
-@@ -7,23 +7,23 @@
+--- usr/local/etc/drweb/drweb32.ini.orig	Thu Oct  7 17:04:33 2004
++++ usr/local/etc/drweb/drweb32.ini	Thu Oct  7 17:22:05 2004
+@@ -15,34 +15,34 @@
  ;        also used by the updating module to update the search module. You
  ;        may specify relational path, but it is strongly recommended to make
  ;        it absolute.
@@ -11,8 +11,21 @@
  ;        Masks for the loaded virus bases. This parameter is also used by
  ;        the updating module to update antivirus' bases. A few masks can be
  ;        enumerated.
--VirusBase = "/var/drweb/bases/*.vdb"
-+VirusBase = "%INSTALL%/bases/*.vdb"
+-VirusBase = "/var/drweb/bases/*.vdb", "/var/drweb/bases/*.VDB"
++VirusBase = "%INSTALL%/bases/*.vdb", "%INSTALL%/bases/*.VDB"
+ 
+ ;UpdatePath = { path }
+ ;       This parameter is used by update script. This is a place for files
+ ;       (except drweb32.dll and bases) has been downloaded by update script.
+-UpdatePath = "/var/drweb/updates"
++UpdatePath = "%INSTALL%/updates"
+ 
+ ;TempPath = { path }
+ ;       This path is used by antivirus engine for creating temporary files. 
+ ;       /tmp would been used if TempPath is not defined. 
+ ;       Normally, the daemon attempts to avoid using of TempPath.
+-TempPath = "/var/drweb/spool"
++TempPath = "/tmp"
  
  ;LngFileName = { path to the language resource file, usual extension - dwl }
  ;        Localization file location.
@@ -23,44 +36,21 @@
  ;        Location of the file with the registration key. You may specify
  ;        relational path, but it is strongly recommended to make it
  ;        absolute.
--Key = "/usr/local/drweb/drwebd.key"
-+Key = "%INSTALL%/drwebd.key"
- 
- ; --- Scanning settings: ---
+-Key = "/usr/local/drweb/drweb32.key"
++Key = "%INSTALL%/drweb32.key"
  
-@@ -96,7 +96,7 @@
- ;        of their importance, you can find out where the daemon's report will
- ;        be written to, basing on these two parameters and the contents of
- ;        the configuration file syslog (usually /etc/syslogd.conf).
--LogFileName = "/var/drweb/log/drwebd.log"
-+LogFileName = "%INSTALL%/log/drwebd.log"
- ;LogFileName = "syslog"
- ;SyslogFacility = "Daemon"
- ;SyslogPriority = "Info"
-@@ -141,7 +141,7 @@
- ;OutputMode = { Terminal | Quiet }
- ;        Mode of output information on the console, Quiet cancels
- ;        output.
--OutputMode = Terminal
-+OutputMode = Quiet
- 
- ;--- User settings: ---
- 
-@@ -170,10 +170,11 @@
- ;        Example: Socket 3000 127.0.0.1, 192.168.0.100
- ;        The second form describes unix-socket, {file} - socket name,
- ;        {access} - octal value of access rights.
--;        Example: Socket /var/run/drwebd.socket 666 
-+;        Example: Socket /var/run/drwebd.socket 666
- ;        Number of socket keys is not limited, daemon will work with all
- ;        correctly described sockets.
--Socket = 3000 127.0.0.1
-+;Socket 3000 127.0.0.1
-+Socket = %INSTALL%/run/drwebd.sock 660
- 
- ;ListeningQueue = "value"
- ;        Defines sockets queue maximum size. Value may vary from 0 to
-@@ -187,7 +188,7 @@
+ ;MailAddressesList = {path to the file}
+ ;        This file is used only if you have bought e-mail license for
+@@ -50,7 +50,7 @@
+ ;        Location of file with list of licensed email addresses.
+ ;        Format of file: one address per line. Address can be in local
+ ;        or local@fqdn form. See default email.ini for examples.
+-MailAddressesList = "/usr/local/etc/drweb/email.ini"
++MailAddressesList = "%INSTALL%/email.ini"
+ 
+ ;TrafficEqualPerHour = { Yes | No }
+ ;        This parameter is used only if you have bought traffic license.
+@@ -108,7 +108,7 @@
  ;        Default value:
  ;               "/var/run/drwebd.pid" (Attention!!! Only the programs executed
  ;               with the root rights have write access to /var/run).
@@ -69,31 +59,41 @@
  
  ;BusyFile = { path to file }
  ;        Daemon's busy file name: it is created by the scanning "copy" of
-@@ -196,7 +197,7 @@
+@@ -117,7 +117,7 @@
  ;        every "copy" of the daemon gets expanded with a point and ASCIIZ
  ;        representation of PID (e.g., /var/run/drwebd.bsy.123456).
  ;        Default value: absent (file does not get created)
--;BusyFile = "/var/drweb/run/drwebd.bsy"
-+;BusyFile = "%INSTALL%/run/drwebd.bsy"
+-BusyFile = "/var/drweb/run/drwebd.bsy"
++BusyFile = "%INSTALL%/run/drwebd.bsy"
  
  ;MaxChildren = "value"
  ;        Sets maximum amount of simultaneously working child (scanning)
-@@ -252,12 +253,12 @@
- ;        MaxCompressionRatio switch). 
- ;CompressionCheckThreshold = 1024
- 
+@@ -220,13 +220,13 @@
+ ;MoveFilesTo = { path }
+ ;        Path to quarantine directory. 
+ ;        This feature is used only by Dr.Web VFS for Samba. 
 -MoveFilesTo = "/var/drweb/infected"
 +MoveFilesTo = "%INSTALL%/infected"
- RenameFilesTo = #??
  
- ;UpdatePath = path
- ;       This parameter is used by update script.
--UpdatePath = "/var/drweb/updates"
-+UpdatePath = "%INSTALL%/updates"
+ ;BackupFilesTo = { path }
+ ;        Path to directory is used for backup infected files
+ ;        if curing has been requested. No backup copies will
+ ;        be created if parameter was not been defined.
+-;BackupFilesTo = "/var/drweb/infected"
++;BackupFilesTo = "%INSTALL%/infected"
+ 
  
- ;--- Filter settings: ---
- ;
-@@ -318,23 +319,23 @@
+ ; ====================
+@@ -244,7 +244,7 @@
+ ;LogFileName = "syslog"
+ ;SyslogFacility = "Daemon"
+ ;SyslogPriority = "Info"
+-LogFileName = "/var/drweb/log/drwebd.log"
++LogFileName = "/var/log/drwebd.log"
+ 
+ ;LimitLog = { Yes | No }
+ ;        Enable/Disable limit for log file size. Parameter
+@@ -435,34 +435,34 @@
  ;        also used by the updating module to update the search module. You
  ;        may specify relational path, but it is strongly recommended to make
  ;        it absolute.
@@ -102,11 +102,24 @@
  
  ;VirusBase = { list of the paths (masks) to the files, usual extension is vdb }
  ;        Masks for the loaded virus bases. This parameter is also used by
- ;        the updating module to update antivirus' bases. A few masks can be
+ ;        the updating module to update antivirus bases. A few masks can be
  ;        enumerated.
 -VirusBase = "/var/drweb/bases/*.vdb", "/var/drweb/bases/*.VDB"
 +VirusBase = "%INSTALL%/bases/*.vdb", "%INSTALL%/bases/*.VDB"
  
+ ;UpdatePath = { path }
+ ;       This parameter is used by update script. This is a place for files
+ ;       (except drweb32.dll and bases) has been downloaded by update script.
+-UpdatePath = "/var/drweb/updates"
++UpdatePath = "%INSTALL%/updates"
+ 
+ ;TempPath = { path }
+ ;       This path is used by antivirus engine for creating temporary files. 
+ ;       /tmp would been used if TempPath is not defined. 
+ ;       Normally, the daemon attempts to avoid using of TempPath.
+-TempPath = "/var/drweb/spool"
++TempPath = "/tmp"
+ 
  ;LngFileName = { path to the language resource file, usual extension - dwl }
  ;        Localization file location.
 -;LngFileName = "/usr/local/drweb/lib/russian.dwl"
@@ -116,33 +129,17 @@
  ;        Location of the file with the registration key. You may specify
  ;        relational path, but it is strongly recommended to make it
  ;        absolute.
--Key = "/usr/local/drweb/drweb.key"
-+Key = "%INSTALL%/drweb.key"
+-Key = "/usr/local/drweb/drweb32.key"
++Key = "%INSTALL%/drweb32.key"
  
- ;FilesTypes = { extension list }
- ;        Types of files that will get checked if by type scanning is
-@@ -410,7 +411,7 @@
- ActionInfectedMail = Report
- ActionInfectedContainer = Report
- 
--MoveFilesTo = "/var/drweb/infected"
-+MoveFilesTo = "%INSTALL%/infected"
- RenameFilesTo = #??
- 
- ;LogFileName = { file name }
-@@ -421,7 +422,7 @@
- ;        of their importance, you can find out where the daemon's report will
- ;        be written to, basing on these two parameters and the contents of
- ;        the configuration file syslog (usually /etc/syslogd.conf).
+ ; ========================
+ ; =   Running settings   =
+@@ -614,7 +614,7 @@
+ ;LogFileName = "syslog"
+ ;SyslogFacility = "Daemon"
+ ;SyslogPriority = "Info"
 -LogFileName = "/var/drweb/log/drweb.log"
-+LogFileName = "%INSTALL%/log/drweb.log"
- 
- ;LogScanned = { Yes | No }
- ;        Should the information on all the checked objects independently
-@@ -467,5 +468,5 @@
- 
- ;UpdatePath = path
- ;       This parameter is used by update script.
--UpdatePath = /usr/local/drweb/updates
-+UpdatePath = %INSTALL%/updates
++LogFileName = "/var/log/drweb.log"
  
+ ;LimitLog = { Yes | No }
+ ;        Enable/Disable limit for log file size. Parameter
diff -ruN security/drweb.orig/files/patch-ab security/drweb/files/patch-ab
--- security/drweb.orig/files/patch-ab	Sat Feb 28 18:17:44 2004
+++ security/drweb/files/patch-ab	Thu Oct  7 17:02:46 2004
@@ -1,20 +1,20 @@
---- usr/local/drweb/update/update.pl.orig	Sat Nov  1 07:59:33 2003
-+++ usr/local/drweb/update/update.pl	Sat Nov  1 08:00:54 2003
-@@ -41,7 +41,7 @@
+--- usr/local/drweb/update/update.pl.orig	Thu Oct  7 16:51:20 2004
++++ usr/local/drweb/update/update.pl	Thu Oct  7 16:56:31 2004
+@@ -17,7 +17,7 @@
  my $ini = $ARGV[0];
  if( $ini eq '' )
  {
--  $ini = '/usr/local/etc/drweb/drweb32.ini' if $^O =~ /BSD/i;  
-+  $ini = '%INSTALL%/drweb32.ini' if $^O =~ /BSD/i;  
-   $ini = '/etc/drweb/drweb32.ini' if $ini eq '';    
+-  $ini = '/usr/local/etc/drweb/drweb32.ini';  
++  $ini = '%INSTALL%/drweb32.ini';  
  }
  
-@@ -79,7 +79,7 @@
-    die "Bases path is not defined!" unless $bases;
-    die "Update path is not defined!" unless $update;
-    
--   $pidFile = "/var/drweb/run/drwebd.pid" if( $pidFile eq '' );
-+   $pidFile = "%INSTALL%/drwebd.pid" if( $pidFile eq '' );
+ my $wget = `which wget 2>&1`;
+@@ -44,7 +44,7 @@
+    die 'Bases path is not defined!' unless $bases;
+    die 'Update path is not defined!' unless $update;
  
- my $version = readVersion( $engine ); 
-    die "Engine version error (invalid engine?)" unless $version;
+-   $pidFile = '/var/drweb/run/drwebd.pid' if $pidFile eq '';
++   $pidFile = '%INSTALL%/run/drwebd.pid' if $pidFile eq '';
+ 
+    my ( $kmd5, $knum ) = parseKey($keyFile);
+    $wget = $wget.' -q --header="X-DrWeb-Validate: '.$kmd5.'" --header="X-DrWeb-KeyNumber: '.$knum.'" -O';
diff -ruN security/drweb.orig/files/patch-ac security/drweb/files/patch-ac
--- security/drweb.orig/files/patch-ac	Thu May 20 22:46:43 2004
+++ security/drweb/files/patch-ac	Thu Oct  7 16:47:22 2004
@@ -1,5 +1,5 @@
---- usr/local/etc/rc.d/00drwebd.sh.orig	Sat Nov  1 08:03:03 2003
-+++ usr/local/etc/rc.d/00drwebd.sh	Sat Nov  1 08:06:38 2003
+--- usr/local/etc/rc.d/00.drwebd.sh.orig	Sat Nov  1 08:03:03 2003
++++ usr/local/etc/rc.d/00.drwebd.sh	Sat Nov  1 08:06:38 2003
 @@ -3,20 +3,20 @@
  case "$1" in
      stop)
diff -ruN security/drweb.orig/pkg-install security/drweb/pkg-install
--- security/drweb.orig/pkg-install	Tue May 18 02:58:53 2004
+++ security/drweb/pkg-install	Thu Oct  7 17:56:14 2004
@@ -16,8 +16,10 @@
 
 if ! pw groupshow "${GROUP}" 2>/dev/null 1>&2; then
 	if pw groupadd ${GROUP} -g ${GID}; then
+		echo ""
 		echo "Added group \"${GROUP}\"."
 	else
+		echo ""
 		echo "Adding group \"${GROUP}\" failed..."
 		ex=1
 	fi
@@ -27,26 +29,25 @@
 	if pw useradd ${USER} -u ${UID} -g ${GROUP} -h - \
 		-s "/sbin/nologin" -d "/nonexistent" -c "Dr. Web Scanner"
 	then
+		echo ""
 		echo "Added user \"${USER}\"."
 	else
+		echo ""
 		echo "Adding user \"${USER}\" failed..."
 		ex=1
 	fi
 fi
 
-if ! grep -q "^!${USER}" /etc/syslog.conf; then
-  echo "You may also add this lines to your /etc/syslog.conf:"
-  echo "!drwebd"
-  echo "*.*             /var/log/drwebd.log"
-  echo ""
-fi
-if ! grep -q ${USER} /etc/crontab; then
-  if ! crontab -l -u ${BINOWN} | grep -q ${USER}; then
-      echo "You may also add this crontab entry to /etc/crontab"
-      echo "0 12 * * * ${BINOWN} ${PKG_PREFIX}/drweb/update/update.pl"
-      echo ""
-  fi
-fi
+echo ""
+echo "You may also add this lines to your /etc/syslog.conf:"
+echo "!drwebd"
+echo "*.*             /var/log/drwebd.log"
+
+echo ""
+echo "You may also add this crontab entry to /etc/crontab"
+echo "0 12 * * * ${BINOWN} ${PKG_PREFIX}/drweb/update/update.pl"
+echo ""
+
 [ "$ex" = "1" ] && exit 1
 install -dv -m 0755 -o ${USER} -g ${BINGRP} ${PKG_PREFIX}/drweb/run
 install -dv -m 0700 -o ${USER} -g ${BINGRP} ${PKG_PREFIX}/drweb/infected
diff -ruN security/drweb.orig/pkg-plist security/drweb/pkg-plist
--- security/drweb.orig/pkg-plist	Tue May 18 02:58:53 2004
+++ security/drweb/pkg-plist	Fri Oct  8 09:35:14 2004
@@ -1,44 +1,31 @@
-@comment $FreeBSD: ports/security/drweb/pkg-plist,v 1.21 2004/05/17 22:58:53 linimon Exp $
 bin/drweb
-drweb/ChangeLog
-drweb/README
-drweb/README.RUS
-drweb/bases/drw43112.vdb
-drweb/bases/drw43111.vdb
-drweb/bases/drw43110.vdb
-drweb/bases/drw43109.vdb
-drweb/bases/drw43108.vdb
-drweb/bases/drw43107.vdb
-drweb/bases/drw43106.vdb
-drweb/bases/drw43105.vdb
-drweb/bases/drw43104.vdb
-drweb/bases/drw43103.vdb
-drweb/bases/drw43102.vdb
-drweb/bases/drw43101.vdb
+drweb/bases/drw43201.vdb
 drweb/bases/drwebase.vdb
+drweb/bases/drwtoday.vdb
+drweb/doc/ChangeLog
+drweb/doc/FAQ
+drweb/doc/FAQ.rus
 drweb/doc/readme.daemon
 drweb/doc/readme.daemon.rus
-drweb/doc/readme.eicar
 drweb/doc/readme.scanner
 drweb/doc/readme.scanner.rus
 drweb/drweb
-@unexec if [ -f %D/drweb/drweb.key ] && cmp -s %D/drweb/drweb.key %D/drweb/drweb.key-distr; then rm -f %D/drweb/drweb.key; fi
-drweb/drweb.key-distr
-@exec if [ ! -f %D/drweb/drweb.key ] ; then cp -p %D/%F %B/drweb.key; fi
 @unexec if [ -f %D/drweb/drweb32.ini ] && cmp -s %D/drweb/drweb32.ini %D/drweb/drweb32.ini-distr; then rm -f %D/drweb/drweb32.ini; fi
 drweb/drweb32.ini-distr
 @exec if [ ! -f %D/drweb/drweb32.ini ] ; then cp -p %D/%F %B/drweb32.ini; fi
 drweb/drwebd
-@unexec if [ -f %D/drweb/drwebd.key ] && cmp -s %D/drweb/drwebd.key %D/drweb/drwebd.key-distr; then rm -f %D/drweb/drwebd.key; fi
-drweb/drwebd.key-distr
-@exec if [ ! -f %D/drweb/drwebd.key ] ; then cp -p %D/%F %B/drwebd.key; fi
 drweb/drwebdc
+drweb/email.ini-distr
+drweb/getkey.HOWTO
+drweb/getkey.rus.HOWTO
 drweb/lib/drweb32.dll
 drweb/lib/russian.dwl
 drweb/update/readme.update
 drweb/update/readme.update.rus
 drweb/update/update.pl
-etc/rc.d/00drwebd.sh
+etc/rc.d/00.drwebd.sh
+share/nls/POSIX
+share/nls/en_US.US-ASCII
 @dirrm drweb/updates
 @dirrm drweb/update
 @dirrm drweb/run

Please update this port.

-- 
===========================================
Spectrum, Moscow, 103009, Strastnoy blvr. 8
Demin Alexander - Network administrator
http://www.spectrum.ru/
===========================================



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20041025120139.33a0cb79.support>