Date: Fri, 17 Oct 2008 05:26:51 +0000 (UTC) From: Pyun YongHyeon <yongari@FreeBSD.org> To: cvs-src-old@freebsd.org Subject: cvs commit: src/sys/dev/mii e1000phy.c Message-ID: <200810170527.m9H5R1cx073727@repoman.freebsd.org>
next in thread | raw e-mail | index | archive | help
yongari 2008-10-17 05:26:51 UTC
FreeBSD src repository
Modified files:
sys/dev/mii e1000phy.c
Log:
SVN rev 183966 on 2008-10-17 05:26:51Z by yongari
Some 88E1149 PHY's page select is initialized to point to other
bank instead of copper/fiber bank which in turn resulted in
wrong registers were accessed during PHY operation. It is
believed that page 0 should be used for copper PHY so reinitialize
E1000_EADR to select default copper PHY.
This fixes link establishment issue of nfe(4) on Sun Fire X4140.
OpenBSD also has similimar patch but they just reset the E1000_EADR
register to page 0. However some Marvell PHYs((88E3082, 88E1000)
don't have the extended address register and the meaning of the
register is quite different for each PHY model. So selecting copper
PHY is limited to 88E1149 PHY which seems to be the only one that
exhibits link establishment problem. If parent device know the type
of PHY(either copper or fiber) that information should be notified
to PHY driver but there is no good way to pass this information yet.
Reported by: thompsa
Reviewed by: thompsa
Revision Changes Path
1.23 +14 -0 src/sys/dev/mii/e1000phy.c
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200810170527.m9H5R1cx073727>