Date: Sun, 25 Oct 2015 13:22:29 +0100 From: Kurt Jaeger <lists@opsec.eu> To: freebsd-mips@freebsd.org Subject: Edge Router Lite, 11-current and vi dumping core ? Message-ID: <20151025122229.GS19913@home.opsec.eu>
next in thread | raw e-mail | index | archive | help
Hi! I built a very recent 11-current to run on the Ubiquity Edge Router Lite, using mkerlimage from http://rtfm.net/FreeBSD/ERL/. If I try to invoke vi via serial console or via remote ssh session, a crash is recorded on the serial console: root@erl:~ # uname -a FreeBSD erl 11.0-CURRENT FreeBSD 11.0-CURRENT #0 r289925M: Sun Oct 25 09:31:34 CET 2015 pi@fc.opsec.eu:/usr/obj/mips.mips64/usr/src/sys/ERL mips root@erl:~ # [invoking vi via SSH on other session] cpuid = 1 Oct 25 12:05:28 erl kernel: BAD_PAGE_FAULT: pid 1326 tid 100056 (vi), uid 0: pc 0x120013480 got a write fault (type 0x3) at 0x161616b98 Oct 25 12:05:28 erl kernel: Trapframe Register Dump: Oct 25 12:05:28 erl kernel: zero: 0 at: 0x7fffffffffffffff v0: 0x161616030 v1: 0xa Oct 25 12:05:28 erl kernel: a0: 0x120080eb8 a1: 0x15 a2: 0x16 a3: 0x120012068 Oct 25 12:05:28 erl kernel: a4: 0x1602ea270 a5: 0x1602ffa00 a6: 0xff a6: 0x16060d000 Oct 25 12:05:28 erl kernel: t0: 0 t1: 0 t2: 0x8 t3: 0x120013458 Oct 25 12:05:28 erl kernel: t8: 0x232 t9: 0x1 s0: 0x120011f10 s1: 0x160616000 Oct 25 12:05:28 erl kernel: s2: 0 s3: 0x16067a000 s4: 0 s5: 0x7fffffeb70 Oct 25 12:05:28 erl kernel: s6: 0x1 s7: 0 k0: 0 k1: 0 Oct 25 12:05:28 erl kernel: gp: 0x120089960 sp: 0x7fffffe838 s8: 0x160616010 ra: 0x120013458 Oct 25 12:05:28 erl kernel: sr: 0x808cb3 mullo: 0x30 mulhi: 0 badvaddr: 0x161616b98 Oct 25 12:05:28 erl kernel: cause: 0xc pc: 0x120013480 Oct 25 12:05:28 erl kernel: Page table info for pc address 0x120013480: pde = 0x9800000005f73000, pte = 0x28000000018fe5a Oct 25 12:05:28 erl kernel: Dumping 4 words starting at pc address 0x120013480: Oct 25 12:05:28 erl kernel: ac430b68 24a50001 14c5fff9 64840008 Oct 25 12:05:28 erl kernel: Page table info for bad address 0x161616b98: pde = 0x98000000050ad000, pte = 0 Any ideas on how I can debug this ? -- pi@opsec.eu +49 171 3101372 5 years to go !
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20151025122229.GS19913>