Date: Fri, 11 Jun 2010 13:40:51 GMT From: Hartmann@FreeBSD.org, "O." <ohartman@mail.zedat.fu-berlin.de> To: freebsd-gnats-submit@FreeBSD.org Subject: ports/147788: xf86-video-radeonhd-devel-1.3.0.20091101_3/xf86-video-ati (xorg-7.5): crashing system when using with DBUS and HAL Message-ID: <201006111340.o5BDepLQ037042@www.freebsd.org> Resent-Message-ID: <201006111350.o5BDo3j1063595@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 147788
>Category: ports
>Synopsis: xf86-video-radeonhd-devel-1.3.0.20091101_3/xf86-video-ati (xorg-7.5): crashing system when using with DBUS and HAL
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-ports-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Fri Jun 11 13:50:02 UTC 2010
>Closed-Date:
>Last-Modified:
>Originator: Hartmann, O.
>Release: FreeBSD 8.1-PRE/amd64
>Organization:
FU Berlin
>Environment:
>Description:
Using Xorg driver xf86-video-radeonhd-devel-1.3.0.20091101_3, xf86-video-radeonhd or xf86-video-ati of the most recent ports collection (xorg-7.5, but also xorg-7.4) in conjunction with DBUS and HAL enabled crashes/freezes a FreeBSD 8.1-PRE/amd64 box.
The problem is manyfolded and I can not find a clear structure in how it appears.
The only working configuration is now with driver xf86-video-radeonhd-devel-1.3.0.20091101_3 and the below listed xorg.conf. DBUS and HAL are DISABLED and must be disabled, otherwise the working config also crashes immediately the box when xdm is starting.
In a working scenario, DRI must be off, HAL and DBUS must not be loaded, Xorg is configured with xorg.conf.
Non working scenarios are triggered by using config file xorg.conf.new. when configured via xorg.conf.new and DBUS and HAL are disabled, even with EXA and DRI set to ON the system starts up and works, but without keyboard/mouse. When HAL and DBUS are enabled (setting hald_ebale=YES and dbus_enable=YES in /etc/rc.conf[.local] and resetting xdm, Xorg crashed immediately and the box freezes with distorted graphics outpot and heavily distorted pointer sprite.
Using driver "radeon" or the non-devel "radeonhd" leaves the box in any case unusable.
The box in question is a 64 Bit Intel CPU Q6600 driven computer based on a motherboard ASUS P5K Premium P35-based motherboard with 8 GB of DDR2-800 RAM. the problem occur on both ATI Radeon 4670 and Radeon 4770 graphics boards.
FreeBSD modules radeon/dri are loaded via boot.loader, but it doesn't matter whether they are loaded or not.
Below I will provide the following files:
dmesg: dmesg output of the box
xorg.conf.works: working /etc/X11/xorg.conf
xorg.conf.nogo: nonworking /etc/X11/xorg.conf
Xorg.0.log: Logfile of working scenario
Xorg.0.log.old: Logfile of nonworking scenario
-------------------------------------------------------------------
dmesg:
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-PRERELEASE #97 r209035: Fri Jun 11 10:23:57 CEST 2010
root@telesto.geoinf.fu-berlin.de:/usr/obj/usr/src/sys/TELESTO amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (3010.37-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6fb Family = 6 Model = f Stepping = 11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 8589934592 (8192 MB)
avail memory = 8258797568 (7876 MB)
ACPI APIC Table: <A_M_I_ OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <A_M_I_ OEMXSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xb000-0xb0ff mem 0xd0000000-0xdfffffff,0xfe8e0000-0xfe8effff irq 16 at device 0.0 on pci1
drm0: <ATI Radeon HD 4770> on vgapci0
info: [drm] MSI enabled 1 message(s)
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] Initialized radeon 1.31.0 20080613
hdac0: <ATI RV730 High Definition Audio Controller> mem 0xfe8fc000-0xfe8fffff irq 17 at device 0.1 on pci1
hdac0: HDA Driver Revision: 20100226_0142
hdac0: [ITHREAD]
uhci0: <Intel 82801I (ICH9) USB controller> port 0xa800-0xa81f irq 16 at device 26.0 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0xa880-0xa89f irq 21 at device 26.1 on pci0
uhci1: [ITHREAD]
usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0xac00-0xac1f irq 18 at device 26.2 on pci0
uhci2: [ITHREAD]
usbus2: <Intel 82801I (ICH9) USB controller> on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfe7ffc00-0xfe7fffff irq 18 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
hdac1: <Intel 82801I High Definition Audio Controller> mem 0xfe7f8000-0xfe7fbfff irq 22 at device 27.0 on pci0
hdac1: HDA Driver Revision: 20100226_0142
hdac1: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
ahci0: <JMicron JMB363 AHCI SATA controller> mem 0xfeafe000-0xfeafffff irq 16 at device 0.0 on pci3
ahci0: [ITHREAD]
ahci0: AHCI v1.00 with 2 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: [ITHREAD]
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: [ITHREAD]
atapci0: <JMicron JMB363 UDMA133 controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f at device 0.1 on pci3
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci2: <ACPI PCI bus> on pcib4
mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> port 0xc800-0xc8ff mem 0xfe9fc000-0xfe9fffff irq 17 at device 0.0 on pci2
msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03> on mskc0
msk0: Ethernet address: 00:1d:60:a6:fa:74
miibus0: <MII bus> on msk0
e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
mskc0: [ITHREAD]
uhci3: <Intel 82801I (ICH9) USB controller> port 0xa080-0xa09f irq 23 at device 29.0 on pci0
uhci3: [ITHREAD]
usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0xa400-0xa41f irq 19 at device 29.1 on pci0
uhci4: [ITHREAD]
usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0xa480-0xa49f irq 18 at device 29.2 on pci0
uhci5: [ITHREAD]
usbus6: <Intel 82801I (ICH9) USB controller> on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfe7ff800-0xfe7ffbff irq 23 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pci5: <serial bus, FireWire> at device 3.0 (no driver attached)
pci5: <network, ethernet> at device 4.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci1: <Intel ICH9 AHCI SATA controller> port 0x9c00-0x9c07,0x9880-0x9883,0x9800-0x9807,0x9480-0x9483,0x9400-0x941f mem 0xfe7fe800-0xfe7fefff irq 22 at device 31.2 on pci0
ahci1: [ITHREAD]
ahci1: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
ahcich2: <AHCI channel> at channel 0 on ahci1
ahcich2: [ITHREAD]
ahcich3: <AHCI channel> at channel 1 on ahci1
ahcich3: [ITHREAD]
ahcich4: <AHCI channel> at channel 2 on ahci1
ahcich4: [ITHREAD]
ahcich5: <AHCI channel> at channel 3 on ahci1
ahcich5: [ITHREAD]
ahcich6: <AHCI channel> at channel 4 on ahci1
ahcich6: [ITHREAD]
ahcich7: <AHCI channel> at channel 5 on ahci1
ahcich7: [ITHREAD]
ichsmb0: <Intel 82801I (ICH9) SMBus controller> port 0x400-0x41f mem 0xfe7ff400-0xfe7ff4ff irq 18 at device 31.3 on pci0
ichsmb0: [ITHREAD]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd2fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <8 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0 at vga0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
Timecounters tick every 1.200 msec
vboxdrv: fAsync=0 offMin=0x1a7 offMax=0x678
IPsec: Initialized Security Association Processing.
hdac0: HDA Codec #0: ATI R6xx HDMI
pcm0: <HDA ATI R6xx HDMI PCM #0 HDMI> at cad 0 nid 1 on hdac0
hdac1: HDA Codec #0: Analog Devices AD1988B
pcm1: <HDA Analog Devices AD1988B PCM #0 Analog> at cad 0 nid 1 on hdac1
pcm2: <HDA Analog Devices AD1988B PCM #1 Analog> at cad 0 nid 1 on hdac1
pcm3: <HDA Analog Devices AD1988B PCM #2 Digital> at cad 0 nid 1 on hdac1
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ada0 at ahcich2 bus 0 scbus3 target 0 lun 0
ada0: <Hitachi HDT725025VLA380 V5DOA52A> ATA-7 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
ada1 at ahcich3 bus 0 scbus4 target 0 lun 0
ada1: <SAMSUNG HD642JJ 1AA01109> ATA-7 SATA 2.x device
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 610480MB (1250263728 512 byte sectors: 16H 63S/T 16383C)
ada2 at ahcich4 bus 0 scbus5 target 0 lun 0
ada2: <SAMSUNG HD501LJ CR100-11> ATA-8 SATA 2.x device
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)cd0 at ahcich7 bus 0 scbus8 target 0 lun 0
cd0: <HL-DT-ST DVD-RAM GH22LS30 1.01> Removable CD-ROM SCSI-0 device
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
ada3 at ahcich5 bus 0 scbus6 target 0 lun 0
ada3: <SAMSUNG HD403LJ CT100-11> ATA-8 SATA 2.x device
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 381554MB (781422768 512 byte sectors: 16H 63S/T 16383C)
ada4 at ahcich6 bus 0 scbus7 target 0 lun 0
ada4: <WDC WD1001FALS-00J7B0 05.00K05> ATA-8 SATA 2.x device
ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
ugen1.1: <Intel> at usbus1ugen0.1: <Intel> at usbus0ugen2.1: <Intel> at usbus2
ugen3.1: <Intel> at usbus3
uhub0:
<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen4.1: <Intel> at usbus4ugen5.1: <Intel> at usbus5
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen7.1: <Intel> at usbus7ugen6.1: <Intel> at usbus6
uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
GEOM: ada0s1: geometry does not match label (255h,63s != 16h,63s).
GEOM: ada0s2: geometry does not match label (255h,63s != 16h,63s).
uhub0: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub7: 2 ports with 2 removable, self powered
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
uhub1: 6 ports with 6 removable, self powered
uhub6: 6 ports with 6 removable, self powered
Trying to mount root from ufs:/dev/ada0s1a
WARNING: / was not properly dismounted
ugen6.2: <Logitech> at usbus6
ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/27.20, addr 2> on usbus6
ums0: 8 buttons and [XYZT] coordinates ID=0
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 0 0 0 done
All buffers synced.
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-PRERELEASE #97 r209035: Fri Jun 11 10:23:57 CEST 2010
root@telesto.geoinf.fu-berlin.de:/usr/obj/usr/src/sys/TELESTO amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (3010.37-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6fb Family = 6 Model = f Stepping = 11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 8589934592 (8192 MB)
avail memory = 8258797568 (7876 MB)
ACPI APIC Table: <A_M_I_ OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <A_M_I_ OEMXSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xb000-0xb0ff mem 0xd0000000-0xdfffffff,0xfe8e0000-0xfe8effff irq 16 at device 0.0 on pci1
drm0: <ATI Radeon HD 4770> on vgapci0
info: [drm] MSI enabled 1 message(s)
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] Initialized radeon 1.31.0 20080613
hdac0: <ATI RV730 High Definition Audio Controller> mem 0xfe8fc000-0xfe8fffff irq 17 at device 0.1 on pci1
hdac0: HDA Driver Revision: 20100226_0142
hdac0: [ITHREAD]
uhci0: <Intel 82801I (ICH9) USB controller> port 0xa800-0xa81f irq 16 at device 26.0 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0xa880-0xa89f irq 21 at device 26.1 on pci0
uhci1: [ITHREAD]
usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0xac00-0xac1f irq 18 at device 26.2 on pci0
uhci2: [ITHREAD]
usbus2: <Intel 82801I (ICH9) USB controller> on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfe7ffc00-0xfe7fffff irq 18 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
hdac1: <Intel 82801I High Definition Audio Controller> mem 0xfe7f8000-0xfe7fbfff irq 22 at device 27.0 on pci0
hdac1: HDA Driver Revision: 20100226_0142
hdac1: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
ahci0: <JMicron JMB363 AHCI SATA controller> mem 0xfeafe000-0xfeafffff irq 16 at device 0.0 on pci3
ahci0: [ITHREAD]
ahci0: AHCI v1.00 with 2 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: [ITHREAD]
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: [ITHREAD]
atapci0: <JMicron JMB363 UDMA133 controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f at device 0.1 on pci3
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci2: <ACPI PCI bus> on pcib4
mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> port 0xc800-0xc8ff mem 0xfe9fc000-0xfe9fffff irq 17 at device 0.0 on pci2
msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03> on mskc0
msk0: Ethernet address: 00:1d:60:a6:fa:74
miibus0: <MII bus> on msk0
e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
mskc0: [ITHREAD]
uhci3: <Intel 82801I (ICH9) USB controller> port 0xa080-0xa09f irq 23 at device 29.0 on pci0
uhci3: [ITHREAD]
usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0xa400-0xa41f irq 19 at device 29.1 on pci0
uhci4: [ITHREAD]
usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0xa480-0xa49f irq 18 at device 29.2 on pci0
uhci5: [ITHREAD]
usbus6: <Intel 82801I (ICH9) USB controller> on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfe7ff800-0xfe7ffbff irq 23 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pci5: <serial bus, FireWire> at device 3.0 (no driver attached)
pci5: <network, ethernet> at device 4.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci1: <Intel ICH9 AHCI SATA controller> port 0x9c00-0x9c07,0x9880-0x9883,0x9800-0x9807,0x9480-0x9483,0x9400-0x941f mem 0xfe7fe800-0xfe7fefff irq 22 at device 31.2 on pci0
ahci1: [ITHREAD]
ahci1: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
ahcich2: <AHCI channel> at channel 0 on ahci1
ahcich2: [ITHREAD]
ahcich3: <AHCI channel> at channel 1 on ahci1
ahcich3: [ITHREAD]
ahcich4: <AHCI channel> at channel 2 on ahci1
ahcich4: [ITHREAD]
ahcich5: <AHCI channel> at channel 3 on ahci1
ahcich5: [ITHREAD]
ahcich6: <AHCI channel> at channel 4 on ahci1
ahcich6: [ITHREAD]
ahcich7: <AHCI channel> at channel 5 on ahci1
ahcich7: [ITHREAD]
ichsmb0: <Intel 82801I (ICH9) SMBus controller> port 0x400-0x41f mem 0xfe7ff400-0xfe7ff4ff irq 18 at device 31.3 on pci0
ichsmb0: [ITHREAD]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd2fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <8 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0 at vga0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
Timecounters tick every 1.200 msec
vboxdrv: fAsync=0 offMin=0x1a7 offMax=0x65d
IPsec: Initialized Security Association Processing.
hdac0: HDA Codec #0: ATI R6xx HDMI
pcm0: <HDA ATI R6xx HDMI PCM #0 HDMI> at cad 0 nid 1 on hdac0
hdac1: HDA Codec #0: Analog Devices AD1988B
pcm1: <HDA Analog Devices AD1988B PCM #0 Analog> at cad 0 nid 1 on hdac1
pcm2: <HDA Analog Devices AD1988B PCM #1 Analog> at cad 0 nid 1 on hdac1
pcm3: <HDA Analog Devices AD1988B PCM #2 Digital> at cad 0 nid 1 on hdac1
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ada0 at ahcich2 bus 0 scbus3 target 0 lun 0
ada0: <Hitachi HDT725025VLA380 V5DOA52A> ATA-7 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
ada1 at ahcich3 bus 0 scbus4 target 0 lun 0
ada1: <SAMSUNG HD642JJ 1AA01109> ATA-7 SATA 2.xcd0 at ahcich7 bus 0 scbus8 target 0 lun 0
cd0: <HL-DT-ST DVD-RAM GH22LS30 1.01> Removable CD-ROM SCSI-0 device
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
device
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 610480MB (1250263728 512 byte sectors: 16H 63S/T 16383C)
ada2 at ahcich4 bus 0 scbus5 target 0 lun 0
ada2: <SAMSUNG HD501LJ CR100-11> ATA-8 SATA 2.x device
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada3 at ahcich5 bus 0 scbus6 target 0 lun 0
ada3: <SAMSUNG HD403LJ CT100-11> ATA-8 SATA 2.x device
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 381554MB (781422768 512 byte sectors: 16H 63S/T 16383C)
ada4 at ahcich6 bus 0 scbus7 target 0 lun 0
ada4: <WDC WD1001FALS-00J7B0 05.00K05> ATA-8 SATA 2.x device
ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
ugen1.1: <Intel> at usbus1ugen0.1: <Intel> at usbus0ugen2.1: <Intel> at usbus2ugen3.1: <Intel> at usbus3
uhub0:
<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4ugen5.1: <Intel> at usbus5ugen6.1: <Intel> at usbus6ugen7.1: <Intel> at usbus7
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
GEOM: ada0s1: geometry does not match label (255h,63s != 16h,63s).
GEOM: ada0s2: geometry does not match label (255h,63s != 16h,63s).
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
Trying to mount root from ufs:/dev/ada0s1a
ZFS filesystem version 3
ZFS storage pool version 14
ugen6.2: <Logitech> at usbus6
ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/27.20, addr 2> on usbus6
ums0: 8 buttons and [XYZT] coordinates ID=0
module_register: module ng_ether already exists!
Module ng_ether failed to register: 17
vboxnet0: Ethernet address: 0a:00:27:00:00:00
pf: started
altq: started
msk0: link state changed to UP
-----------------------------------------------------------------------------
xorg.conf.works:
# File generated by xorgconfig.
#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#
# **********************************************************************
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
# Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
Load "type1"
Load "freetype"
Load "xtt"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#
FontPath "/usr/local/lib/X11/fonts/misc/"
FontPath "/usr/local/lib/X11/fonts/TTF/"
FontPath "/usr/local/lib/X11/fonts/OTF"
FontPath "/usr/local/lib/X11/fonts/Type1/"
FontPath "/usr/local/lib/X11/fonts/100dpi/"
FontPath "/usr/local/lib/X11/fonts/75dpi/"
FontPath "/usr/local/lib/X11/fonts/local/"
FontPath "/usr/local/lib/X11/fonts/Speedo/"
FontPath "/usr/local/lib/X11/fonts/TrueType/"
FontPath "/usr/local/lib/X11/fonts/freefont/"
# The module search path. The default path is shown here.
# ModulePath "/usr/local/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
#
# Neccessary due to avoidance of hald
#
Option "AutoAddDevices" "Off"
Option "AutoEnableDevices" "Off"
Option "AllowEmptyInput" "Off"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/sysmouse"
#Option "Device" "/dev/ums0"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
Option "Resolution" "1024"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "SyncMaster204B"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 24.0-90.5
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 60
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "HD4770"
#Driver "vesa"
Driver "radeonhd"
Option "AccelMethod" "EXA"
Option "DRI" "Off"
Option "Audio" "On"
#Option "DynamicClocks" "On"
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "HD4770"
Monitor "SyncMaster204B"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1920x1200"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# Option "AIGLX" "Off"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "DRI"
Mode 0666
EndSection
-------------------------------------------------------------------------------
xorg.conf.nogo:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/local/lib/xorg/modules"
FontPath "/usr/local/lib/X11/fonts/misc/"
FontPath "/usr/local/lib/X11/fonts/TTF/"
FontPath "/usr/local/lib/X11/fonts/OTF"
FontPath "/usr/local/lib/X11/fonts/Type1/"
FontPath "/usr/local/lib/X11/fonts/100dpi/"
FontPath "/usr/local/lib/X11/fonts/75dpi/"
EndSection
Section "Module"
Load "extmod"
Load "record"
Load "dbe"
Load "glx"
Load "dri"
#Load "dri2"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/sysmouse"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Samsung"
ModelName "SyncMaster245B"
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # <i>
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "AudioStreamSilence" # [<str>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
#Option "ForceLowPowerMode" # [<bool>]
#Option "LowPowerModeEngineClock" # <i>
Identifier "Card0"
Driver "radeonhd"
VendorName "ATI Technologies Inc"
BoardName "Radeon HD 4770 [RV740]"
#BusID "PCI:1:0:0"
Option "DRI" "Off"
Option "AccelMethod" "EXA"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1920x1200"
EndSubSection
EndSection
----------------------------------------------------------------------------
Xorg.0.log (working scenario):
X.Org X Server 1.7.5
Release Date: 2010-02-16
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 8.1-PRERELEASE amd64
Current Operating System: FreeBSD telesto.geoinf.fu-berlin.de 8.1-PRERELEASE FreeBSD 8.1-PRERELEASE #97 r209035: Fri Jun 11 10:23:57 CEST 2010 root@telesto.geoinf.fu-berlin.de:/usr/obj/usr/src/sys/TELESTO amd64
Build Date: 10 June 2010 03:54:17PM
Current version of pixman: 0.16.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 11 12:05:26 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/local/lib/X11/fonts/misc/,
/usr/local/lib/X11/fonts/TTF/,
/usr/local/lib/X11/fonts/OTF,
/usr/local/lib/X11/fonts/Type1/,
/usr/local/lib/X11/fonts/100dpi/,
/usr/local/lib/X11/fonts/75dpi/,
/usr/local/lib/X11/fonts/misc/,
/usr/local/lib/X11/fonts/TTF/,
/usr/local/lib/X11/fonts/OTF,
/usr/local/lib/X11/fonts/Type1/,
/usr/local/lib/X11/fonts/100dpi/,
/usr/local/lib/X11/fonts/75dpi/
(**) ModulePath set to "/usr/local/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x692320
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 8
(--) PCI:*(0:1:0:0) 1002:94b3:1043:031c ATI Technologies Inc Radeon HD 4770 [RV740] rev 0, Mem @ 0xd0000000/268435456, 0xfe8e0000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/65536
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "extmod"
(II) Loading /usr/local/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/local/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/local/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/local/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/local/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "radeonhd"
(II) Loading /usr/local/lib/xorg/modules/drivers/radeonhd_drv.so
(II) Module radeonhd: vendor="AMD GPG"
compiled for 1.7.5, module version = 1.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) RADEONHD: X driver for the following AMD GPG (ATI) graphics devices:
RV505 : Radeon X1550, X1550 64bit.
RV515 : Radeon X1300, X1550, X1600; FireGL V3300, V3350.
RV516 : Radeon X1300, X1550, X1550 64-bit, X1600; FireMV 2250.
R520 : Radeon X1800; FireGL V5300, V7200, V7300, V7350.
RV530 : Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200.
RV535 : Radeon X1300, X1650.
RV550 : Radeon X2300 HD.
RV560 : Radeon X1650.
RV570 : Radeon X1950, X1950 GT; FireGL V7400.
R580 : Radeon X1900, X1950; AMD Stream Processor.
R600 : Radeon HD 2900 GT/Pro/XT; FireGL V7600/V8600/V8650.
RV610 : Radeon HD 2350, HD 2400 Pro/XT, HD 2400 Pro AGP; FireGL V4000.
RV620 : Radeon HD 3450, HD 3470.
RV630 : Radeon HD 2600 LE/Pro/XT, HD 2600 Pro/XT AGP; Gemini RV630;
FireGL V3600/V5600.
RV635 : Radeon HD 3650, HD 3670.
RV670 : Radeon HD 3690, 3850, HD 3870, FireGL V7700, FireStream 9170.
R680 : Radeon HD 3870 X2.
M52 : Mobility Radeon X1300.
M54 : Mobility Radeon X1400; M54-GL.
M56 : Mobility Radeon X1600; Mobility FireGL V5200.
M58 : Mobility Radeon X1800, X1800 XT; Mobility FireGL V7100, V7200.
M62 : Mobility Radeon X1350.
M64 : Mobility Radeon X1450, X2300.
M66 : Mobility Radeon X1700, X1700 XT; FireGL V5250.
M68 : Mobility Radeon X1900.
M71 : Mobility Radeon HD 2300.
M72 : Mobility Radeon HD 2400; Radeon E2400.
M74 : Mobility Radeon HD 2400 XT.
M76 : Mobility Radeon HD 2600;
(Gemini ATI) Mobility Radeon HD 2600 XT.
M82 : Mobility Radeon HD 3400.
M86 : Mobility Radeon HD 3650, HD 3670, Mobility FireGL V5700.
M88 : Mobility Radeon HD 3850, HD 3850 X2, HD 3870, HD3870 X2.
RS600 : Radeon Xpress 1200, Xpress 1250.
RS690 : Radeon X1200, X1250, X1270.
RS740 : RS740, RS740M.
RS780 : Radeon HD 3100/3200/3300 Series.
R700 : Radeon R700.
RV710 : Radeon HD4570, HD4350.
RV730 : Radeon HD4670, HD4650.
RV740 : Radeon HD4770. EXPERIMENTAL AND UNTESTED.
RV770 : Radeon HD 4800 Series; Everest, K2, Denali ATI FirePro.
RV790 : Radeon HD 4890.
M92 : Mobility Radeon HD4330, HD4530, HD4570. EXPERIMENTAL.
M93 : Mobility Radeon M93. EXPERIMENTAL AND UNTESTED.
M96 : Mobility Radeon HD4600.
M97 : Mobility Radeon HD4860. EXPERIMENTAL AND UNTESTED.
M98 : Mobility Radeon HD4850, HD4870.
(II) RADEONHD: version 1.3.0, built from non-git sources
(II) Primary Device is: PCI 01@00:00:0
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(**) RADEONHD(0): Depth 24, (--) framebuffer bpp 32
(**) RADEONHD(0): Option "AccelMethod" "EXA"
(**) RADEONHD(0): Option "DRI" "Off"
(**) RADEONHD(0): Selected EXA 2D acceleration.
(II) RADEONHD(0): Card not in database: 0x94B3:0x1043:0x031C; using generic modesetting.
If - and only if - your card does not work or does not work optimally
please contact radeonhd@opensuse.org to help rectify this.
Use the subject: 0x94B3:0x1043:0x031C: <name of board>
and *please* describe the problems you are seeing
in your message.
(--) RADEONHD(0): Detected an RV740 on an unidentified card
(II) RADEONHD(0): Mapped IO @ 0xfe8e0000 to 0x8006c9000 (size 0x00010000)
(II) RADEONHD(0): PCIE Card Detected
(II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location
(II) RADEONHD(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1043 SubsystemID: 0x031c
IOBaseAddress: 0xb000
Filename: AB106074.BIN
BIOS Bootup Message:
94B3.11.22.3.7.AS02
(II) RADEONHD(0): Analog TV Default Mode: 1
(II) RADEONHD(0): Found default TV Mode NTSC
(II) RADEONHD(0): The detected amount of videoram exceeds the PCI BAR aperture.
(II) RADEONHD(0): Using only 262144kB of the total 524288kB.
(--) RADEONHD(0): VideoRAM: 262144 kByte
(II) RADEONHD(0): Framebuffer space used by Firmware (kb): 20
(II) RADEONHD(0): Start of VRAM area used by Firmware: 0x7ffec
(II) RADEONHD(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEONHD(0): AtomBIOS VRAM scratch base: 0x7ffec
(WW) RADEONHD(0): rhdAtomAllocateFbScratch: FW FB scratch area not located at the end of VRAM. Scratch End: 0x84fec VRAM End: 0x10000000
(II) RADEONHD(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEONHD(0): Default Engine Clock: 750000
(II) RADEONHD(0): Default Memory Clock: 800000
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 16000
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 6000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 100000
(II) RADEONHD(0): Direct rendering explicitly turned off.
(WW) RADEONHD(0): Falling back to ShadowFB acceleration
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEONHD(0): Reference Clock: 100000
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f88
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f88
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 3" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1fc4
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1fc4
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 4" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1fe8
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1fe8
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 5" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) RADEONHD(0): Detected VGA mode.
(**) RADEONHD(0): Using AtomBIOS for Crtcs
(**) RADEONHD(0): Using AtomBIOS for PLLs
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 100000
(II) RADEONHD(0): rhdAtomSetPixelClockVersion returned version 3 for index 0xc
(II) RADEONHD(0): rhdAtomSetPixelClockVersion returned version 3 for index 0xc
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000)
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000)
(II) RADEONHD(0): FirmwareInfo Revision 0104
(II) RADEONHD(0): Unused attribute: ul3DAccelerationEngineClock 0
(II) RADEONHD(0): Unused attribute: ulDriverTargetEngineClock 0
(II) RADEONHD(0): Unused attribute: ulDriverTargetMemoryClock 0
(II) RADEONHD(0): Unused attribute: ucASICMaxTemperature 0
(II) RADEONHD(0): Scary bits: Estimated MinEngineClock 250000 kHz
(II) RADEONHD(0): Scary bits: Estimated MinMemoryClock 250000 kHz
(II) RADEONHD(0): Default Engine Clock: 750000
(II) RADEONHD(0): Default Memory Clock: 800000
(II) RADEONHD(0): Current Engine Clock: 750000
(II) RADEONHD(0): Current Memory Clock: 800000
(II) RADEONHD(0): Current Chip Voltage: 1000
(II) RADEONHD(0): Power Management: used engine clock / memory clock / core (VDDC) voltage (0: ignore)
(II) RADEONHD(0): Power Management: Raw Ranges
(II) RADEONHD(0): Minimum 250000 kHz / 250000 kHz / 0.900 V
(II) RADEONHD(0): Maximum 850000 kHz / 850000 kHz / 1.200 V
(II) RADEONHD(0): Default 750000 kHz / 800000 kHz / 1.000 V
(II) RADEONHD(0): PowerPlayInfo Revision 0501
(EE) RADEONHD(0): Unusupported PowerPlayInfo Revision
(II) RADEONHD(0): Query for Get Chip Configs: not implemented
(EE) RADEONHD(0): Power Management: Cannot get known good chip configurations
(II) RADEONHD(0): Power Management: Validated Ranges
(II) RADEONHD(0): Minimum 250000 kHz / 250000 kHz / 0.900 V
(II) RADEONHD(0): Maximum 850000 kHz / 850000 kHz / 1.200 V
(II) RADEONHD(0): Default 750000 kHz / 800000 kHz / 1.000 V
(II) RADEONHD(0): Power Management: Final Levels
(II) RADEONHD(0): Off 250000 kHz / 250000 kHz / 0.900 V
(II) RADEONHD(0): Idle 750000 kHz / 800000 kHz / 1.000 V
(II) RADEONHD(0): Slow2D 750000 kHz / 800000 kHz / 1.000 V
(II) RADEONHD(0): Fast2D 750000 kHz / 800000 kHz / 1.000 V
(II) RADEONHD(0): Slow3D 750000 kHz / 800000 kHz / 1.000 V
(II) RADEONHD(0): Fast3D 750000 kHz / 800000 kHz / 1.000 V
(II) RADEONHD(0): Max3D 850000 kHz / 850000 kHz / 1.200 V
(II) RADEONHD(0): User 750000 kHz / 800000 kHz / 1.000 V
(II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_DVI_SINGLE, "HDMI_TYPE_A DFP2", RHD_DDC_2, RHD_HPD_1, { RHD_OUTPUT_UNIPHYD, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_VGA, "VGA CRT2", RHD_DDC_4, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[2] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I CRT1 DFP1", RHD_DDC_3, RHD_HPD_0, { RHD_OUTPUT_UNIPHYA, RHD_OUTPUT_DACA } }
(**) RADEONHD(0): Using AtomBIOS for Outputs
(EE) RADEONHD(0): RHDHdmiInit: unknown HDMI output type
(II) RADEONHD(0): rhdAtomSelectCrtcSourceVersion returned version 2 for index 0x2a
(--) RADEONHD(0): Attaching Output AtomOutputUniphyD to Connector DVI-D 1
(**) RADEONHD(0): Using AtomBIOS for Outputs
(II) RADEONHD(0): rhdAtomSelectCrtcSourceVersion returned version 2 for index 0x2a
(--) RADEONHD(0): Attaching Output AtomOutputDACB to Connector VGA 1
(**) RADEONHD(0): Using AtomBIOS for Outputs
(II) RADEONHD(0): rhdAtomSelectCrtcSourceVersion returned version 2 for index 0x2a
(--) RADEONHD(0): Attaching Output AtomOutputUniphyA to Connector DVI-I 2
(**) RADEONHD(0): Using AtomBIOS for Outputs
(II) RADEONHD(0): rhdAtomSelectCrtcSourceVersion returned version 2 for index 0x2a
(--) RADEONHD(0): Attaching Output AtomOutputDACA to Connector DVI-I 2
(II) RADEONHD(0): RandR: Adding RRoutput DVI-D_1 for Output AtomOutputUniphyD
(II) RADEONHD(0): RandR: Adding RRoutput VGA_1 for Output AtomOutputDACB
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/digital for Output AtomOutputUniphyA
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/analog for Output AtomOutputDACA
(II) RADEONHD(0): Output DVI-D_1 using monitor section Monitor0
(II) RADEONHD(0): Output DVI-D_1 has no monitor section
(II) RADEONHD(0): Output VGA_1 has no monitor section
(II) RADEONHD(0): Output DVI-I_2/digital has no monitor section
(II) RADEONHD(0): Output DVI-I_2/analog has no monitor section
(II) RADEONHD(0): Calling DAC_LoadDetection
(II) RADEONHD(0): DAC_LoadDetection Successful
(II) RADEONHD(0): Calling DAC_LoadDetection
(II) RADEONHD(0): DAC_LoadDetection Successful
(II) RADEONHD(0): Setting AtomOutputUniphyA to incoherent
(II) RADEONHD(0): I2C device "RHD I2C line 3:ddc2" registered at address 0xA0.
(II) RADEONHD(0): I2C device "RHD I2C line 3:DDC control interface" registered at address 0x6E.
(II) RADEONHD(0): EDID data for SyncMaster
(II) RADEONHD(0): Manufacturer: SAM Model: 2b6 Serial#: 1213542964
(II) RADEONHD(0): Year: 2008 Week: 36
(II) RADEONHD(0): EDID Version: 1.3
(II) RADEONHD(0): Digital Display Input
(II) RADEONHD(0): Max Image Size [cm]: horiz.: 52 vert.: 32
(II) RADEONHD(0): Gamma: 2.60
(II) RADEONHD(0): DPMS capabilities: Off
(II) RADEONHD(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEONHD(0): First detailed timing is preferred mode
(II) RADEONHD(0): redX: 0.653 redY: 0.337 greenX: 0.295 greenY: 0.607
(II) RADEONHD(0): blueX: 0.144 blueY: 0.075 whiteX: 0.312 whiteY: 0.329
(II) RADEONHD(0): Supported established timings:
(II) RADEONHD(0): 720x400@70Hz
(II) RADEONHD(0): 640x480@60Hz
(II) RADEONHD(0): 640x480@67Hz
(II) RADEONHD(0): 640x480@72Hz
(II) RADEONHD(0): 640x480@75Hz
(II) RADEONHD(0): 800x600@56Hz
(II) RADEONHD(0): 800x600@60Hz
(II) RADEONHD(0): 800x600@72Hz
(II) RADEONHD(0): 800x600@75Hz
(II) RADEONHD(0): 832x624@75Hz
(II) RADEONHD(0): 1024x768@60Hz
(II) RADEONHD(0): 1024x768@70Hz
(II) RADEONHD(0): 1024x768@75Hz
(II) RADEONHD(0): 1280x1024@75Hz
(II) RADEONHD(0): 1152x864@75Hz
(II) RADEONHD(0): Manufacturer's mask: 0
(II) RADEONHD(0): Supported standard timings:
(II) RADEONHD(0): #0: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
(II) RADEONHD(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEONHD(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) RADEONHD(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEONHD(0): Supported detailed timing:
(II) RADEONHD(0): clock: 154.0 MHz Image Size: 518 x 324 mm
(II) RADEONHD(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
(II) RADEONHD(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0
(II) RADEONHD(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 170 MHz
(II) RADEONHD(0): Monitor name: SyncMaster
(II) RADEONHD(0): Serial No: H9XQ902250
(II) RADEONHD(0): EDID (in hex):
(II) RADEONHD(0): 00ffffffffffff004c2db60234325548
(II) RADEONHD(0): 24120103803420a02a5ad1a7564b9b24
(II) RADEONHD(0): 135054bfef80a94081808140714f0101
(II) RADEONHD(0): 010101010101283c80a070b023403020
(II) RADEONHD(0): 360006442100001a000000fd00384b1e
(II) RADEONHD(0): 5111000a202020202020000000fc0053
(II) RADEONHD(0): 796e634d61737465720a2020000000ff
(II) RADEONHD(0): 00483958513930323235300a202000a0
(II) RADEONHD(0): Calling DAC_LoadDetection
(II) RADEONHD(0): DAC_LoadDetection Successful
(II) RADEONHD(0): Output DVI-D_1 disconnected
(II) RADEONHD(0): Output VGA_1 disconnected
(II) RADEONHD(0): Output DVI-I_2/digital connected
(II) RADEONHD(0): Output DVI-I_2/analog disconnected
(II) RADEONHD(0): Using user preference for initial modes
(II) RADEONHD(0): Output DVI-I_2/digital using initial mode 1920x1200
(II) RADEONHD(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) RADEONHD(0): RandR 1.2 support enabled
(==) RADEONHD(0): RGB weight 888
(==) RADEONHD(0): Default visual is TrueColor
(II) RADEONHD(0): Using 3840x1920 Framebuffer with 3840 pitch
(II) RADEONHD(0): FB: Allocated ScanoutBuffer at offset 0x00008000 (size = 0x01C20000)
(==) RADEONHD(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/local/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/local/lib/xorg/modules/libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) RADEONHD(0): Using ShadowFB
(--) Depth 24 pixmap format is 32 bpp
(II) RADEONHD(0): Mapped IO @ 0xfe8e0000 to 0x8006c9000 (size 0x00010000)
(II) RADEONHD(0): Mapped FB @ 0xd0000000 to 0x802a00000 (size 0x10000000)
(II) RADEONHD(0): Attempting to enable power management
(II) RADEONHD(0): Current Engine Clock: 750000
(II) RADEONHD(0): Current Memory Clock: 800000
(II) RADEONHD(0): Current Chip Voltage: 1000
(II) RADEONHD(0): Calling EnableCRTC
(II) RADEONHD(0): EnableCRTC Successful
(II) RADEONHD(0): Calling EnableCRTCMemReq
(II) RADEONHD(0): EnableCRTCMemReq Successful
(II) RADEONHD(0): Calling EnableCRTC
(II) RADEONHD(0): EnableCRTC Successful
(II) RADEONHD(0): Calling EnableCRTCMemReq
(II) RADEONHD(0): EnableCRTCMemReq Successful
(II) RADEONHD(0): Current Engine Clock: 750000
(II) RADEONHD(0): Current Memory Clock: 800000
(II) RADEONHD(0): Current Chip Voltage: 1000
(WW) RADEONHD(0): RHDCSInit: CS for R600 requires DRI.
(==) RADEONHD(0): Backing store disabled
(==) RADEONHD(0): Silken mouse enabled
(II) RADEONHD(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) RADEONHD(0): Calling BlankCRTC
(II) RADEONHD(0): BlankCRTC Successful
(II) RADEONHD(0): Calling BlankCRTC
(II) RADEONHD(0): BlankCRTC Successful
(II) RADEONHD(0): Calling BlankCRTC
(II) RADEONHD(0): BlankCRTC Successful
(II) RADEONHD(0): Calling BlankCRTC
(II) RADEONHD(0): BlankCRTC Successful
(II) RADEONHD(0): Calling BlankCRTC
(II) RADEONHD(0): BlankCRTC Successful
(II) RADEONHD(0): Calling BlankCRTC
(II) RADEONHD(0): BlankCRTC Successful
(II) RADEONHD(0): Calling DAC2OutputControl
(II) RADEONHD(0): DAC2OutputControl Successful
(II) RADEONHD(0): Calling DACBEncoderControl
(II) RADEONHD(0): DACBEncoderControl Successful
(II) RADEONHD(0): Calling DAC1OutputControl
(II) RADEONHD(0): DAC1OutputControl Successful
(II) RADEONHD(0): Calling DACAEncoderControl
(II) RADEONHD(0): DACAEncoderControl Successful
(II) RADEONHD(0): Calling EnableCRTC
(II) RADEONHD(0): EnableCRTC Successful
(II) RADEONHD(0): Calling EnableCRTCMemReq
(II) RADEONHD(0): EnableCRTCMemReq Successful
(II) RADEONHD(0): Calling EnableCRTC
(II) RADEONHD(0): EnableCRTC Successful
(II) RADEONHD(0): Calling EnableCRTCMemReq
(II) RADEONHD(0): EnableCRTCMemReq Successful
(II) RADEONHD(0): Mapping DIG1 encoder to KLDSKP_UNIPHYA
(II) RADEONHD(0): Calling UNIPHYTransmitterControl
(II) RADEONHD(0): UNIPHYTransmitterControl Successful
(II) RADEONHD(0): Calling EnableCRTC
(II) RADEONHD(0): EnableCRTC Successful
(II) RADEONHD(0): Calling EnableCRTCMemReq
(II) RADEONHD(0): EnableCRTCMemReq Successful
(II) RADEONHD(0): On Crtc 0 Setting 60.0 Hz Mode: Modeline "1920x1200" 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync
(II) RADEONHD(0): Calling SetCRTC_Timing
(II) RADEONHD(0): SetCRTC_Timing Successful
(II) RADEONHD(0): CallingSetCRTC_OverScan
(II) RADEONHD(0): Set CRTC_OverScan Successful
(II) RADEONHD(0): Calling EnableScaler
(II) RADEONHD(0): EnableScaler Successful
(II) RADEONHD(0): Calling SetPixelClock
(II) RADEONHD(0): SetPixelClock Successful
(II) RADEONHD(0): Calling UNIPHYTransmitterControl
(II) RADEONHD(0): UNIPHYTransmitterControl Successful
(II) RADEONHD(0): Calling UNIPHYTransmitterControl
(II) RADEONHD(0): UNIPHYTransmitterControl Successful
(II) RADEONHD(0): Calling SelectCRTCSource
(II) RADEONHD(0): SelectCRTCSource Successful
(II) RADEONHD(0): RHDAudioSetClock: using AtomOutputUniphyA as clock source with 154000 khz
(II) RADEONHD(0): Using ACR timing N=4096 CTS=154000 for frequency 32000
(II) RADEONHD(0): Using ACR timing N=6272 CTS=171111 for frequency 44100
(II) RADEONHD(0): Using ACR timing N=6144 CTS=154000 for frequency 48000
(II) RADEONHD(0): Calling EnableCRTCMemReq
(II) RADEONHD(0): EnableCRTCMemReq Successful
(II) RADEONHD(0): Calling EnableCRTC
(II) RADEONHD(0): EnableCRTC Successful
(II) RADEONHD(0): Calling DIG1EncoderControl
(II) RADEONHD(0): DIG1EncoderControl Successful
(II) RADEONHD(0): Calling UNIPHYTransmitterControl
(II) RADEONHD(0): UNIPHYTransmitterControl Successful
(II) RADEONHD(0): Calling UNIPHYTransmitterControl
(II) RADEONHD(0): UNIPHYTransmitterControl Successful
(II) RADEONHD(0): Calling DAC2OutputControl
(II) RADEONHD(0): DAC2OutputControl Successful
(II) RADEONHD(0): Calling DACBEncoderControl
(II) RADEONHD(0): DACBEncoderControl Successful
(II) RADEONHD(0): Calling DAC1OutputControl
(II) RADEONHD(0): DAC1OutputControl Successful
(II) RADEONHD(0): Calling DACAEncoderControl
(II) RADEONHD(0): DACAEncoderControl Successful
(II) RADEONHD(0): Calling EnableCRTC
(II) RADEONHD(0): EnableCRTC Successful
(II) RADEONHD(0): Calling EnableCRTCMemReq
(II) RADEONHD(0): EnableCRTCMemReq Successful
(II) RADEONHD(0): RHDAudioSetSupported: config 0x60040 codec 0x1
(**) RADEONHD(0): DPMS enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: Loaded and initialized /usr/local/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEONHD(0): Setting screen physical size to 508 x 317
(II) RADEONHD(0): Calling BlankCRTC
(II) RADEONHD(0): BlankCRTC Successful
(II) RADEONHD(0): Calling BlankCRTC
(II) RADEONHD(0): BlankCRTC Successful
--------------------------------------------------------------------------------
Xorg.0.log.old (nonworking scenario):
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/telesto.geoinf.fu-berlin.de:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
X.Org X Server 1.7.5
Release Date: 2010-02-16
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 8.1-PRERELEASE amd64
Current Operating System: FreeBSD telesto.geoinf.fu-berlin.de 8.1-PRERELEASE FreeBSD 8.1-PRERELEASE #97 r209035: Fri Jun 11 10:23:57 CEST 2010 root@telesto.geoinf.fu-berlin.de:/usr/obj/usr/src/sys/TELESTO amd64
Build Date: 10 June 2010 03:54:17PM
Current version of pixman: 0.16.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 11 11:44:28 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/local/lib/X11/fonts/misc/,
/usr/local/lib/X11/fonts/TTF/,
/usr/local/lib/X11/fonts/OTF,
/usr/local/lib/X11/fonts/Type1/,
/usr/local/lib/X11/fonts/100dpi/,
/usr/local/lib/X11/fonts/75dpi/,
/usr/local/lib/X11/fonts/misc/,
/usr/local/lib/X11/fonts/TTF/,
/usr/local/lib/X11/fonts/OTF,
/usr/local/lib/X11/fonts/Type1/,
/usr/local/lib/X11/fonts/100dpi/,
/usr/local/lib/X11/fonts/75dpi/
(**) ModulePath set to "/usr/local/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x692320
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 8
(--) PCI:*(0:1:0:0) 1002:94b3:1043:031c ATI Technologies Inc Radeon HD 4770 [RV740] rev 0, Mem @ 0xd0000000/268435456, 0xfe8e0000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/65536
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/local/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/local/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/local/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/local/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/local/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "radeonhd"
(II) Loading /usr/local/lib/xorg/modules/drivers/radeonhd_drv.so
(II) Module radeonhd: vendor="AMD GPG"
compiled for 1.7.5, module version = 1.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) RADEONHD: X driver for the following AMD GPG (ATI) graphics devices:
RV505 : Radeon X1550, X1550 64bit.
RV515 : Radeon X1300, X1550, X1600; FireGL V3300, V3350.
RV516 : Radeon X1300, X1550, X1550 64-bit, X1600; FireMV 2250.
R520 : Radeon X1800; FireGL V5300, V7200, V7300, V7350.
RV530 : Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200.
RV535 : Radeon X1300, X1650.
RV550 : Radeon X2300 HD.
RV560 : Radeon X1650.
RV570 : Radeon X1950, X1950 GT; FireGL V7400.
R580 : Radeon X1900, X1950; AMD Stream Processor.
R600 : Radeon HD 2900 GT/Pro/XT; FireGL V7600/V8600/V8650.
RV610 : Radeon HD 2350, HD 2400 Pro/XT, HD 2400 Pro AGP; FireGL V4000.
RV620 : Radeon HD 3450, HD 3470.
RV630 : Radeon HD 2600 LE/Pro/XT, HD 2600 Pro/XT AGP; Gemini RV630;
FireGL V3600/V5600.
RV635 : Radeon HD 3650, HD 3670.
RV670 : Radeon HD 3690, 3850, HD 3870, FireGL V7700, FireStream 9170.
R680 : Radeon HD 3870 X2.
M52 : Mobility Radeon X1300.
M54 : Mobility Radeon X1400; M54-GL.
M56 : Mobility Radeon X1600; Mobility FireGL V5200.
M58 : Mobility Radeon X1800, X1800 XT; Mobility FireGL V7100, V7200.
M62 : Mobility Radeon X1350.
M64 : Mobility Radeon X1450, X2300.
M66 : Mobility Radeon X1700, X1700 XT; FireGL V5250.
M68 : Mobility Radeon X1900.
M71 : Mobility Radeon HD 2300.
M72 : Mobility Radeon HD 2400; Radeon E2400.
M74 : Mobility Radeon HD 2400 XT.
M76 : Mobility Radeon HD 2600;
(Gemini ATI) Mobility Radeon HD 2600 XT.
M82 : Mobility Radeon HD 3400.
M86 : Mobility Radeon HD 3650, HD 3670, Mobility FireGL V5700.
M88 : Mobility Radeon HD 3850, HD 3850 X2, HD 3870, HD3870 X2.
RS600 : Radeon Xpress 1200, Xpress 1250.
RS690 : Radeon X1200, X1250, X1270.
RS740 : RS740, RS740M.
RS780 : Radeon HD 3100/3200/3300 Series.
R700 : Radeon R700.
RV710 : Radeon HD4570, HD4350.
RV730 : Radeon HD4670, HD4650.
RV740 : Radeon HD4770. EXPERIMENTAL AND UNTESTED.
RV770 : Radeon HD 4800 Series; Everest, K2, Denali ATI FirePro.
RV790 : Radeon HD 4890.
M92 : Mobility Radeon HD4330, HD4530, HD4570. EXPERIMENTAL.
M93 : Mobility Radeon M93. EXPERIMENTAL AND UNTESTED.
M96 : Mobility Radeon HD4600.
M97 : Mobility Radeon HD4860. EXPERIMENTAL AND UNTESTED.
M98 : Mobility Radeon HD4850, HD4870.
(II) RADEONHD: version 1.3.0, built from non-git sources
(II) Primary Device is: PCI 01@00:00:0
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(**) RADEONHD(0): Depth 24, (--) framebuffer bpp 32
(**) RADEONHD(0): Option "AccelMethod" "EXA"
(**) RADEONHD(0): Option "DRI" "Off"
(**) RADEONHD(0): Selected EXA 2D acceleration.
(II) RADEONHD(0): Card not in database: 0x94B3:0x1043:0x031C; using generic modesetting.
If - and only if - your card does not work or does not work optimally
please contact radeonhd@opensuse.org to help rectify this.
Use the subject: 0x94B3:0x1043:0x031C: <name of board>
and *please* describe the problems you are seeing
in your message.
(--) RADEONHD(0): Detected an RV740 on an unidentified card
(II) RADEONHD(0): Mapped IO @ 0xfe8e0000 to 0x8006c9000 (size 0x00010000)
(II) RADEONHD(0): PCIE Card Detected
(II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location
(II) RADEONHD(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1043 SubsystemID: 0x031c
IOBaseAddress: 0xb000
Filename: AB106074.BIN
BIOS Bootup Message:
94B3.11.22.3.7.AS02
(II) RADEONHD(0): Analog TV Default Mode: 1
(II) RADEONHD(0): Found default TV Mode NTSC
(II) RADEONHD(0): The detected amount of videoram exceeds the PCI BAR aperture.
(II) RADEONHD(0): Using only 262144kB of the total 524288kB.
(--) RADEONHD(0): VideoRAM: 262144 kByte
(II) RADEONHD(0): Framebuffer space used by Firmware (kb): 20
(II) RADEONHD(0): Start of VRAM area used by Firmware: 0x7ffec
(II) RADEONHD(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEONHD(0): AtomBIOS VRAM scratch base: 0x7ffec
(WW) RADEONHD(0): rhdAtomAllocateFbScratch: FW FB scratch area not located at the end of VRAM. Scratch End: 0x84fec VRAM End: 0x10000000
(II) RADEONHD(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEONHD(0): Default Engine Clock: 750000
(II) RADEONHD(0): Default Memory Clock: 800000
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 16000
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 6000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 100000
(II) RADEONHD(0): Direct rendering explicitly turned off.
(WW) RADEONHD(0): Falling back to ShadowFB acceleration
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEONHD(0): Reference Clock: 100000
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f88
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f88
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 3" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1fc4
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1fc4
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 4" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1fe8
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1fe8
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 5" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) RADEONHD(0): Detected VGA mode.
(**) RADEONHD(0): Using AtomBIOS for Crtcs
(**) RADEONHD(0): Using AtomBIOS for PLLs
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 100000
(II) RADEONHD(0): rhdAtomSetPixelClockVersion returned version 3 for index 0xc
(II) RADEONHD(0): rhdAtomSetPixelClockVersion returned version 3 for index 0xc
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000)
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000)
(II) RADEONHD(0): FirmwareInfo Revision 0104
(II) RADEONHD(0): Unused attribute: ul3DAccelerationEngineClock 0
(II) RADEONHD(0): Unused attribute: ulDriverTargetEngineClock 0
(II) RADEONHD(0): Unused attribute: ulDriverTargetMemoryClock 0
(II) RADEONHD(0): Unused attribute: ucASICMaxTemperature 0
(II) RADEONHD(0): Scary bits: Estimated MinEngineClock 250000 kHz
(II) RADEONHD(0): Scary bits: Estimated MinMemoryClock 250000 kHz
(II) RADEONHD(0): Default Engine Clock: 750000
(II) RADEONHD(0): Default Memory Clock: 800000
(II) RADEONHD(0): Current Engine Clock: 750000
(II) RADEONHD(0): Current Memory Clock: 800000
(II) RADEONHD(0): Current Chip Voltage: 1000
(II) RADEONHD(0): Power Management: used engine clock / memory clock / core (VDDC) voltage (0: ignore)
(II) RADEONHD(0): Power Management: Raw Ranges
(II) RADEONHD(0): Minimum 250000 kHz / 250000 kHz / 0.900 V
(II) RADEONHD(0): Maximum 850000 kHz / 850000 kHz / 1.200 V
(II) RADEONHD(0): Default 750000 kHz / 800000 kHz / 1.000 V
(II) RADEONHD(0): PowerPlayInfo Revision 0501
(EE) RADEONHD(0): Unusupported PowerPlayInfo Revision
(II) RADEONHD(0): Query for Get Chip Configs: not implemented
(EE) RADEONHD(0): Power Management: Cannot get known good chip configurations
(II) RADEONHD(0): Power Management: Validated Ranges
(II) RADEONHD(0): Minimum 250000 kHz / 250000 kHz / 0.900 V
(II) RADEONHD(0): Maximum 850000 kHz / 850000 kHz / 1.200 V
(II) RADEONHD(0): Default 750000 kHz / 800000 kHz / 1.000 V
(II) RADEONHD(0): Power Management: Final Levels
(II) RADEONHD(0): Off 250000 kHz / 250000 kHz / 0.900 V
(II) RADEONHD(0): Idle 750000 kHz / 800000 kHz / 1.000 V
(II) RADEONHD(0): Slow2D 750000 kHz / 800000 kHz / 1.000 V
(II) RADEONHD(0): Fast2D 750000 kHz / 800000 kHz / 1.000 V
(II) RADEONHD(0): Slow3D 750000 kHz / 800000 kHz / 1.000 V
(II) RADEONHD(0): Fast3D 750000 kHz / 800000 kHz / 1.000 V
(II) RADEONHD(0): Max3D 850000 kHz / 850000 kHz / 1.200 V
(II) RADEONHD(0): User 750000 kHz / 800000 kHz / 1.000 V
(II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_DVI_SINGLE, "HDMI_TYPE_A DFP2", RHD_DDC_2, RHD_HPD_1, { RHD_OUTPUT_UNIPHYD, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_VGA, "VGA CRT2", RHD_DDC_4, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[2] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I CRT1 DFP1", RHD_DDC_3, RHD_HPD_0, { RHD_OUTPUT_UNIPHYA, RHD_OUTPUT_DACA } }
(**) RADEONHD(0): Using AtomBIOS for Outputs
(EE) RADEONHD(0): RHDHdmiInit: unknown HDMI output type
(II) RADEONHD(0): rhdAtomSelectCrtcSourceVersion returned version 2 for index 0x2a
(--) RADEONHD(0): Attaching Output AtomOutputUniphyD to Connector DVI-D 1
(**) RADEONHD(0): Using AtomBIOS for Outputs
(II) RADEONHD(0): rhdAtomSelectCrtcSourceVersion returned version 2 for index 0x2a
(--) RADEONHD(0): Attaching Output AtomOutputDACB to Connector VGA 1
(**) RADEONHD(0): Using AtomBIOS for Outputs
(II) RADEONHD(0): rhdAtomSelectCrtcSourceVersion returned version 2 for index 0x2a
(--) RADEONHD(0): Attaching Output AtomOutputUniphyA to Connector DVI-I 2
(**) RADEONHD(0): Using AtomBIOS for Outputs
(II) RADEONHD(0): rhdAtomSelectCrtcSourceVersion returned version 2 for index 0x2a
(--) RADEONHD(0): Attaching Output AtomOutputDACA to Connector DVI-I 2
(II) RADEONHD(0): RandR: Adding RRoutput DVI-D_1 for Output AtomOutputUniphyD
(II) RADEONHD(0): RandR: Adding RRoutput VGA_1 for Output AtomOutputDACB
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/digital for Output AtomOutputUniphyA
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/analog for Output AtomOutputDACA
(II) RADEONHD(0): Output DVI-D_1 using monitor section Monitor0
(II) RADEONHD(0): Output DVI-D_1 has no monitor section
(II) RADEONHD(0): Output VGA_1 has no monitor section
(II) RADEONHD(0): Output DVI-I_2/digital has no monitor section
(II) RADEONHD(0): Output DVI-I_2/analog has no monitor section
(II) RADEONHD(0): Calling DAC_LoadDetection
(II) RADEONHD(0): DAC_LoadDetection Successful
(II) RADEONHD(0): Calling DAC_LoadDetection
(II) RADEONHD(0): DAC_LoadDetection Successful
(II) RADEONHD(0): Setting AtomOutputUniphyA to incoherent
(II) RADEONHD(0): I2C device "RHD I2C line 3:ddc2" registered at address 0xA0.
(II) RADEONHD(0): I2C device "RHD I2C line 3:DDC control interface" registered at address 0x6E.
(II) RADEONHD(0): EDID data for SyncMaster
(II) RADEONHD(0): Manufacturer: SAM Model: 2b6 Serial#: 1213542964
(II) RADEONHD(0): Year: 2008 Week: 36
(II) RADEONHD(0): EDID Version: 1.3
(II) RADEONHD(0): Digital Display Input
(II) RADEONHD(0): Max Image Size [cm]: horiz.: 52 vert.: 32
(II) RADEONHD(0): Gamma: 2.60
(II) RADEONHD(0): DPMS capabilities: Off
(II) RADEONHD(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEONHD(0): First detailed timing is preferred mode
(II) RADEONHD(0): redX: 0.653 redY: 0.337 greenX: 0.295 greenY: 0.607
(II) RADEONHD(0): blueX: 0.144 blueY: 0.075 whiteX: 0.312 whiteY: 0.329
(II) RADEONHD(0): Supported established timings:
(II) RADEONHD(0): 720x400@70Hz
(II) RADEONHD(0): 640x480@60Hz
(II) RADEONHD(0): 640x480@67Hz
(II) RADEONHD(0): 640x480@72Hz
(II) RADEONHD(0): 640x480@75Hz
(II) RADEONHD(0): 800x600@56Hz
(II) RADEONHD(0): 800x600@60Hz
(II) RADEONHD(0): 800x600@72Hz
(II) RADEONHD(0): 800x600@75Hz
(II) RADEONHD(0): 832x624@75Hz
(II) RADEONHD(0): 1024x768@60Hz
(II) RADEONHD(0): 1024x768@70Hz
(II) RADEONHD(0): 1024x768@75Hz
(II) RADEONHD(0): 1280x1024@75Hz
(II) RADEONHD(0): 1152x864@75Hz
(II) RADEONHD(0): Manufacturer's mask: 0
(II) RADEONHD(0): Supported standard timings:
(II) RADEONHD(0): #0: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
(II) RADEONHD(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEONHD(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) RADEONHD(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEONHD(0): Supported detailed timing:
(II) RADEONHD(0): clock: 154.0 MHz Image Size: 518 x 324 mm
(II) RADEONHD(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
(II) RADEONHD(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0
(II) RADEONHD(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 170 MHz
(II) RADEONHD(0): Monitor name: SyncMaster
(II) RADEONHD(0): Serial No: H9XQ902250
(II) RADEONHD(0): EDID (in hex):
(II) RADEONHD(0): 00ffffffffffff004c2db60234325548
(II) RADEONHD(0): 24120103803420a02a5ad1a7564b9b24
(II) RADEONHD(0): 135054bfef80a94081808140714f0101
(II) RADEONHD(0): 010101010101283c80a070b023403020
(II) RADEONHD(0): 360006442100001a000000fd00384b1e
(II) RADEONHD(0): 5111000a202020202020000000fc0053
(II) RADEONHD(0): 796e634d61737465720a2020000000ff
(II) RADEONHD(0): 00483958513930323235300a202000a0
(II) RADEONHD(0): Calling DAC_LoadDetection
(II) RADEONHD(0): DAC_LoadDetection Successful
(II) RADEONHD(0): Output DVI-D_1 disconnected
(II) RADEONHD(0): Output VGA_1 disconnected
(II) RADEONHD(0): Output DVI-I_2/digital connected
(II) RADEONHD(0): Output DVI-I_2/analog disconnected
(II) RADEONHD(0): Using user preference for initial modes
(II) RADEONHD(0): Output DVI-I_2/digital using initial mode 1920x1200
(II) RADEONHD(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) RADEONHD(0): RandR 1.2 support enabled
(==) RADEONHD(0): RGB weight 888
(==) RADEONHD(0): Default visual is TrueColor
(II) RADEONHD(0): Using 3840x1920 Framebuffer with 3840 pitch
(II) RADEONHD(0): FB: Allocated ScanoutBuffer at offset 0x00008000 (size = 0x01C20000)
(==) RADEONHD(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/local/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/local/lib/xorg/modules/libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) RADEONHD(0): Using ShadowFB
(--) Depth 24 pixmap format is 32 bpp
(II) RADEONHD(0): Mapped IO @ 0xfe8e0000 to 0x8006c9000 (size 0x00010000)
(II) RADEONHD(0): Mapped FB @ 0xd0000000 to 0x802a00000 (size 0x10000000)
(II) RADEONHD(0): Attempting to enable power management
(II) RADEONHD(0): Current Engine Clock: 750000
(II) RADEONHD(0): Current Memory Clock: 800000
(II) RADEONHD(0): Current Chip Voltage: 1000
(II) RADEONHD(0): Calling EnableCRTC
(II) RADEONHD(0): EnableCRTC Successful
(II) RADEONHD(0): Calling EnableCRTCMemReq
(II) RADEONHD(0): EnableCRTCMemReq Successful
(II) RADEONHD(0): Calling EnableCRTC
(II) RADEONHD(0): EnableCRTC Successful
(II) RADEONHD(0): Calling EnableCRTCMemReq
(II) RADEONHD(0): EnableCRTCMemReq Successful
(II) RADEONHD(0): Current Engine Clock: 750000
(II) RADEONHD(0): Current Memory Clock: 800000
(II) RADEONHD(0): Current Chip Voltage: 1000
(WW) RADEONHD(0): RHDCSInit: CS for R600 requires DRI.
(==) RADEONHD(0): Backing store disabled
(==) RADEONHD(0): Silken mouse enabled
(II) RADEONHD(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) RADEONHD(0): Calling BlankCRTC
(II) RADEONHD(0): BlankCRTC Successful
(II) RADEONHD(0): Calling BlankCRTC
(II) RADEONHD(0): BlankCRTC Successful
(II) RADEONHD(0): Calling BlankCRTC
(II) RADEONHD(0): BlankCRTC Successful
(II) RADEONHD(0): Calling BlankCRTC
(II) RADEONHD(0): BlankCRTC Successful
(II) RADEONHD(0): Calling BlankCRTC
(II) RADEONHD(0): BlankCRTC Successful
(II) RADEONHD(0): Calling BlankCRTC
(II) RADEONHD(0): BlankCRTC Successful
(II) RADEONHD(0): Calling DAC2OutputControl
(II) RADEONHD(0): DAC2OutputControl Successful
(II) RADEONHD(0): Calling DACBEncoderControl
(II) RADEONHD(0): DACBEncoderControl Successful
(II) RADEONHD(0): Calling DAC1OutputControl
(II) RADEONHD(0): DAC1OutputControl Successful
(II) RADEONHD(0): Calling DACAEncoderControl
(II) RADEONHD(0): DACAEncoderControl Successful
(II) RADEONHD(0): Calling EnableCRTC
(II) RADEONHD(0): EnableCRTC Successful
(II) RADEONHD(0): Calling EnableCRTCMemReq
(II) RADEONHD(0): EnableCRTCMemReq Successful
(II) RADEONHD(0): Calling EnableCRTC
(II) RADEONHD(0): EnableCRTC Successful
(II) RADEONHD(0): Calling EnableCRTCMemReq
(II) RADEONHD(0): EnableCRTCMemReq Successful
(II) RADEONHD(0): Mapping DIG1 encoder to KLDSKP_UNIPHYA
(II) RADEONHD(0): Calling UNIPHYTransmitterControl
(II) RADEONHD(0): UNIPHYTransmitterControl Successful
(II) RADEONHD(0): Calling EnableCRTC
(II) RADEONHD(0): EnableCRTC Successful
(II) RADEONHD(0): Calling EnableCRTCMemReq
(II) RADEONHD(0): EnableCRTCMemReq Successful
(II) RADEONHD(0): On Crtc 0 Setting 60.0 Hz Mode: Modeline "1920x1200" 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync
(II) RADEONHD(0): Calling SetCRTC_Timing
(II) RADEONHD(0): SetCRTC_Timing Successful
(II) RADEONHD(0): CallingSetCRTC_OverScan
(II) RADEONHD(0): Set CRTC_OverScan Successful
(II) RADEONHD(0): Calling EnableScaler
(II) RADEONHD(0): EnableScaler Successful
(II) RADEONHD(0): Calling SetPixelClock
(II) RADEONHD(0): SetPixelClock Successful
(II) RADEONHD(0): Calling UNIPHYTransmitterControl
(II) RADEONHD(0): UNIPHYTransmitterControl Successful
(II) RADEONHD(0): Calling UNIPHYTransmitterControl
(II) RADEONHD(0): UNIPHYTransmitterControl Successful
(II) RADEONHD(0): Calling SelectCRTCSource
(II) RADEONHD(0): SelectCRTCSource Successful
(II) RADEONHD(0): RHDAudioSetClock: using AtomOutputUniphyA as clock source with 154000 khz
(II) RADEONHD(0): Using ACR timing N=4096 CTS=154000 for frequency 32000
(II) RADEONHD(0): Using ACR timing N=6272 CTS=171111 for frequency 44100
(II) RADEONHD(0): Using ACR timing N=6144 CTS=154000 for frequency 48000
(II) RADEONHD(0): Calling EnableCRTCMemReq
(II) RADEONHD(0): EnableCRTCMemReq Successful
(II) RADEONHD(0): Calling EnableCRTC
(II) RADEONHD(0): EnableCRTC Successful
(II) RADEONHD(0): Calling DIG1EncoderControl
(II) RADEONHD(0): DIG1EncoderControl Successful
(II) RADEONHD(0): Calling UNIPHYTransmitterControl
(II) RADEONHD(0): UNIPHYTransmitterControl Successful
(II) RADEONHD(0): Calling UNIPHYTransmitterControl
(II) RADEONHD(0): UNIPHYTransmitterControl Successful
(II) RADEONHD(0): Calling DAC2OutputControl
(II) RADEONHD(0): DAC2OutputControl Successful
(II) RADEONHD(0): Calling DACBEncoderControl
(II) RADEONHD(0): DACBEncoderControl Successful
(II) RADEONHD(0): Calling DAC1OutputControl
(II) RADEONHD(0): DAC1OutputControl Successful
(II) RADEONHD(0): Calling DACAEncoderControl
(II) RADEONHD(0): DACAEncoderControl Successful
(II) RADEONHD(0): Calling EnableCRTC
(II) RADEONHD(0): EnableCRTC Successful
(II) RADEONHD(0): Calling EnableCRTCMemReq
(II) RADEONHD(0): EnableCRTCMemReq Successful
(II) RADEONHD(0): RHDAudioSetSupported: config 0x60040 codec 0x1
(**) RADEONHD(0): DPMS enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: Loaded and initialized /usr/local/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEONHD(0): Setting screen physical size to 508 x 317
(II) RADEONHD(0): Calling BlankCRTC
(II) RADEONHD(0): BlankCRTC Successful
(II) RADEONHD(0): Calling BlankCRTC
(II) RADEONHD(0): BlankCRTC Successful
(II) RADEONHD(0): Calling EnableCRTC
(II) RADEONHD(0): EnableCRTC Successful
(II) RADEONHD(0): Calling EnableCRTCMemReq
(II) RADEONHD(0): EnableCRTCMemReq Successful
(II) RADEONHD(0): Calling EnableCRTC
(II) RADEONHD(0): EnableCRTC Successful
(II) RADEONHD(0): Calling EnableCRTCMemReq
(II) RADEONHD(0): EnableCRTCMemReq Successful
(II) RADEONHD(0): Calling SetPixelClock
(II) RADEONHD(0): SetPixelClock Successful
(II) RADEONHD(0): Calling SetPixelClock
(II) RADEONHD(0): SetPixelClock Successful
(II) RADEONHD(0): Query for Restore Registers: failed
(II) RADEONHD(0): Attempting to disable power management
(II) RADEONHD(0): Current Engine Clock: 750000
(II) RADEONHD(0): Current Memory Clock: 800000
(II) RADEONHD(0): Current Chip Voltage: 1000
(II) RADEONHD(0): Query for Restore Registers: failed
>How-To-Repeat:
Use radeonhd/ati driver with ATI Radeon HD4670 and HD4770 graphics boards.
>Fix:
No fix know execpt using at least Radeon HD4830 graphics boards.
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201006111340.o5BDepLQ037042>