Date: Tue, 19 Jun 2018 23:13:38 +0300 From: Toomas Soome <tsoome@me.com> To: lausts@acm.org Cc: Allan Jude <allanjude@freebsd.org>, FreeBSD Current <freebsd-current@freebsd.org> Subject: Re: Current @ r335314 not bootable with Geli and ZFS Message-ID: <575782A1-D50B-4CF7-A82C-DF879375208E@me.com> In-Reply-To: <3c4d82aa-9020-0da1-2c88-6cfe30c9525c@acm.org> References: <61aeea9a-bb8b-65d0-1ffb-f8fb7b2f121d@acm.org> <3eac8c14-da21-5666-c060-d8a551b3ca49@freebsd.org> <749bde52-58ba-b8db-9528-a74b0304a61e@acm.org> <3c4d82aa-9020-0da1-2c88-6cfe30c9525c@acm.org>
next in thread | previous in thread | raw e-mail | index | archive | help
> On 19 Jun 2018, at 21:51, Thomas Laus <lausts@acm.org> wrote: >=20 > On 06/19/18 14:22, Thomas Laus wrote: >> On 06/19/18 12:09, Allan Jude wrote: >>>=20 >>> We tested all of the changes with the setup in = tools/boot/rootgen.sh, it >>> will be interesting to figure out what went wrong with your setup, = and >>> add it as a test case to prevent this in the future. >>>=20 >>> The recent changes are: >>>=20 >>> r335245 (reading the size of the disk) >>> r335254 (reading past the end of the disk) >>> r335276 (enable the serial console sooner so the password prompt can = be >>> used over serial) >>>=20 > Allan: >=20 > It looks like the problem is with r335276. I reverted back to that > revision and built stand, my boot problem was still there. I reverted > further back to r335254 and everything worked fine. >=20 ou, in illumos side there was an idea of having early boot printouts = mirrored to serial, but it got turned down because there is no way to = tell if any system has some bad side effects from it=E2=80=A6 (either = directly or indirectly by having some weird device connected to the = serial). rgds, toomas
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?575782A1-D50B-4CF7-A82C-DF879375208E>