Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 22 Sep 2011 11:40:47 -0700 (PDT)
From:      Matthew Jacob <mj@feral.com>
To:        David Somayajulu <david.somayajulu@qlogic.com>
Cc:        "freebsd-current@freebsd.org" <freebsd-current@freebsd.org>, "freebsd-drivers@freebsd.org" <freebsd-drivers@freebsd.org>
Subject:   Re: Recommended methods to upgrade firmware on HBAs
Message-ID:  <alpine.BSF.2.00.1109221137570.89493@ns1.feral.com>
In-Reply-To: <75E1A2A7D185F841A975979B0906BBA67BCCAB75FA@AVEXMB1.qlogic.org>
References:  <75E1A2A7D185F841A975979B0906BBA67BCCAB75FA@AVEXMB1.qlogic.org>

next in thread | previous in thread | raw e-mail | index | archive | help

The current firmware(9) mechanism might work for you. The QLogic FC/SCSI 
cards in FreeBSD use that for loading firmware images to download to the 
cards, albeit to just load and reset, to update flash. This allows the 
drivers themselves to request updates.

Note that the root filesystem has to be mounted for this mechanism to 
work.

Other mechanisms include ioctl mechanisms as per what the LSI cards do via 
the mpiutil and mfiutil programs.


On Thu, 22 Sep 2011, David Somayajulu wrote:

> Hi All,
>
> 1.       What is the current recommended method for upgrading firmware for HBAs?
>
> 2.       Is there a mechanism wherein the firmware binary can be provided as a separate file, which is then made accessible to the  corresponding device driver during device initialization?
>
> 3.       Is there a restriction on the size of driver.ko file? If not, is it acceptable to provide the firmware as fw_file.c which is then compiled into the driver.
> Thanks
> david S.
>
>
> ________________________________
> This message and any attached documents contain information from QLogic Corporation or its wholly-owned subsidiaries that may be confidential. If you are not the intended recipient, you may not read, copy, distribute, or use this information. If you have received this transmission in error, please notify the sender immediately by reply e-mail and then delete this message.
> _______________________________________________
> freebsd-current@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
>
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?alpine.BSF.2.00.1109221137570.89493>