Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 1 Apr 2016 19:45:55 +0000 (UTC)
From:      Will Parsons <varro@nodomain.invalid>
To:        freebsd-x11@freebsd.org
Subject:   X broken after upgrading - black screen
Message-ID:  <slrnnftjvi.19e.varro@anukis.local>

next in thread | raw e-mail | index | archive | help
I purposely held off on upgrading the to new X server for over a year
now for fear of breakage, but recently finally upgaded to the latest Xorg
server along with the associated video and input drivers and am left
with a black screen upon starting the X server.  The machine is
apparently still running, but attempting to switch to another virtual
terminal doesn't do anything, even after I followed a suggestion to
add "kern.vty=vt" to /boot/loader.conf.

(I've previously asked on the FreeBSD general questions list without
success.)

It's a Lenovo Edge E520 laptop - see below for the log from Xorg and
info from dmesg.

Any help in recovering from this disaster would be much appreciated.


Xorg.0.log:
==========

[    80.043] 
X.Org X Server 1.17.4
Release Date: 2015-10-28
[    80.043] X Protocol Version 11, Revision 0
[    80.043] Build Operating System: FreeBSD 9.3-RELEASE-p39 i386 
[    80.043] Current Operating System: FreeBSD anukis.local 9.3-RELEASE-p21 FreeBSD 9.3-RELEASE-p21 #0: Tue Jul 28 08:57:41 UTC 2015     root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC i386
[    80.043] Build Date: 26 March 2016  03:53:10AM
[    80.043]  
[    80.043] Current version of pixman: 0.34.0
[    80.043] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    80.043] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    80.044] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 29 12:53:57 2016
[    80.129] (==) Using system config directory "/usr/local/share/X11/xorg.conf.d"
[    80.151] (==) No Layout section.  Using the first Screen section.
[    80.151] (==) No screen section available. Using defaults.
[    80.151] (**) |-->Screen "Default Screen Section" (0)
[    80.151] (**) |   |-->Monitor "<default monitor>"
[    80.152] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    80.152] (==) Automatically adding devices
[    80.152] (==) Automatically enabling devices
[    80.152] (==) Not automatically adding GPU devices
[    80.376] (==) FontPath set to:
	/usr/local/share/fonts/misc/,
	/usr/local/share/fonts/TTF/,
	/usr/local/share/fonts/OTF/,
	/usr/local/share/fonts/Type1/,
	/usr/local/share/fonts/100dpi/,
	/usr/local/share/fonts/75dpi/
[    80.376] (==) ModulePath set to "/usr/local/lib/xorg/modules"
[    80.376] (II) The server relies on devd to provide the list of input devices.
	If no devices become available, reconfigure devd or disable AutoAddDevices.
[    80.376] (II) Loader magic: 0x8226b40
[    80.376] (II) Module ABI versions:
[    80.376] 	X.Org ANSI C Emulation: 0.4
[    80.376] 	X.Org Video Driver: 19.0
[    80.376] 	X.Org XInput driver : 21.0
[    80.376] 	X.Org Server Extension : 9.0
[    80.399] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21e2 rev 9, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/65536
[    80.400] (II) LoadModule: "glx"
[    80.457] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[    80.629] (II) Module glx: vendor="X.Org Foundation"
[    80.629] 	compiled for 1.17.4, module version = 1.0.0
[    80.629] 	ABI class: X.Org Server Extension, version 9.0
[    80.629] (==) AIGLX enabled
[    80.630] (==) Matched intel as autoconfigured driver 0
[    80.630] (==) Matched fbdev as autoconfigured driver 1
[    80.630] (==) Matched vesa as autoconfigured driver 2
[    80.630] (==) Assigned the driver to the xf86ConfigLayout
[    80.630] (II) LoadModule: "intel"
[    80.630] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so
[    80.665] (II) Module intel: vendor="X.Org Foundation"
[    80.665] 	compiled for 1.17.4, module version = 2.21.15
[    80.665] 	Module class: X.Org Video Driver
[    80.665] 	ABI class: X.Org Video Driver, version 19.0
[    80.665] (II) LoadModule: "fbdev"
[    80.665] (II) Loading /usr/local/lib/xorg/modules/drivers/fbdev_drv.so
[    80.679] (II) Module fbdev: vendor="X.Org Foundation"
[    80.679] 	compiled for 1.17.4, module version = 0.4.4
[    80.679] 	Module class: X.Org Video Driver
[    80.679] 	ABI class: X.Org Video Driver, version 19.0
[    80.679] (II) LoadModule: "vesa"
[    80.680] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so
[    80.689] (II) Module vesa: vendor="X.Org Foundation"
[    80.689] 	compiled for 1.17.4, module version = 2.3.4
[    80.689] 	Module class: X.Org Video Driver
[    80.689] 	ABI class: X.Org Video Driver, version 19.0
[    80.689] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
	HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
	HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
	HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
	HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[    80.691] (II) FBDEV: driver for framebuffer: fbdev
[    80.691] (II) VESA: driver for VESA chipsets: vesa
[    80.691] (--) Using syscons driver with X support (version 2.0)
[    80.691] (--) using VT number 9

[    81.644] (WW) Falling back to old probe method for fbdev
[    81.644] (II) Loading sub module "fbdevhw"
[    81.644] (II) LoadModule: "fbdevhw"
[    81.669] (II) Loading /usr/local/lib/xorg/modules/libfbdevhw.so
[    81.679] (EE) LoadModule: Module fbdevhw does not have a fbdevhwModuleData data object.
[    81.679] (II) UnloadModule: "fbdevhw"
[    81.679] (II) Unloading fbdevhw
[    81.679] (EE) Failed to load module "fbdevhw" (invalid module, 0)
[    81.679] (WW) Falling back to old probe method for vesa
[    81.679] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    81.680] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    81.680] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    81.680] (==) intel(0): RGB weight 888
[    81.680] (==) intel(0): Default visual is TrueColor
[    81.680] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[    81.687] (**) intel(0): Relaxed fencing enabled
[    81.687] (**) intel(0): Wait on SwapBuffers? enabled
[    81.687] (**) intel(0): Triple buffering? enabled
[    81.687] (**) intel(0): Framebuffer tiled
[    81.687] (**) intel(0): Pixmaps tiled
[    81.687] (**) intel(0): 3D buffers tiled
[    81.687] (**) intel(0): SwapBuffers wait enabled
[    81.687] (==) intel(0): video overlay key set to 0x101fe
[    81.687] (II) intel(0): Output LVDS1 has no monitor section
[    81.706] (II) intel(0): Output VGA1 has no monitor section
[    81.711] (II) intel(0): Output HDMI1 has no monitor section
[    81.720] (II) intel(0): Output DP1 has no monitor section
[    81.732] (II) intel(0): EDID for output LVDS1
[    81.732] (II) intel(0): Manufacturer: LGD  Model: 2e3  Serial#: 0
[    81.732] (II) intel(0): Year: 2010  Week: 0
[    81.732] (II) intel(0): EDID Version: 1.3
[    81.732] (II) intel(0): Digital Display Input
[    81.732] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    81.732] (II) intel(0): Gamma: 2.20
[    81.732] (II) intel(0): No DPMS capabilities specified
[    81.732] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    81.732] (II) intel(0): First detailed timing is preferred mode
[    81.732] (II) intel(0): redX: 0.613 redY: 0.371   greenX: 0.350 greenY: 0.606
[    81.732] (II) intel(0): blueX: 0.152 blueY: 0.099   whiteX: 0.313 whiteY: 0.329
[    81.732] (II) intel(0): Manufacturer's mask: 0
[    81.732] (II) intel(0): Supported detailed timing:
[    81.732] (II) intel(0): clock: 70.0 MHz   Image Size:  344 x 194 mm
[    81.732] (II) intel(0): h_active: 1366  h_sync: 1402  h_sync_end 1450 h_blank_end 1492 h_border: 0
[    81.732] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 782 v_border: 0
[    81.732] (II) intel(0):  LG Display
[    81.732] (II) intel(0):  LP156WH4-TLB1
[    81.732] (II) intel(0): EDID (in hex):
[    81.732] (II) intel(0): 	00ffffffffffff0030e4e30200000000
[    81.732] (II) intel(0): 	00140103802213780a09159d5f599b27
[    81.732] (II) intel(0): 	19505400000001010101010101010101
[    81.732] (II) intel(0): 	010101010101581b567e50000e302430
[    81.732] (II) intel(0): 	350058c2100000190000000000000000
[    81.732] (II) intel(0): 	00000000000000000000000000fe004c
[    81.732] (II) intel(0): 	4720446973706c61790a2020000000fe
[    81.732] (II) intel(0): 	004c503135365748342d544c42310001
[    81.732] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    81.732] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    81.732] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    81.732] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    81.732] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    81.732] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    81.732] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    81.732] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    81.732] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    81.732] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    81.732] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    81.732] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    81.732] (II) intel(0): Printing probed modes for output LVDS1
[    81.732] (II) intel(0): Modeline "1366x768"x60.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz eP)
[    81.732] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    81.732] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    81.732] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    81.732] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    81.751] (II) intel(0): EDID for output VGA1
[    81.751] (II) intel(0): Manufacturer: EPI  Model: e781  Serial#: 4909
[    81.751] (II) intel(0): Year: 2002  Week: 30
[    81.751] (II) intel(0): EDID Version: 1.3
[    81.751] (II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[    81.751] (II) intel(0): Sync:  Separate
[    81.751] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 27
[    81.751] (II) intel(0): Gamma: 2.20
[    81.751] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[    81.751] (II) intel(0): First detailed timing is preferred mode
[    81.751] (II) intel(0): redX: 0.640 redY: 0.347   greenX: 0.302 greenY: 0.587
[    81.751] (II) intel(0): blueX: 0.143 blueY: 0.099   whiteX: 0.321 whiteY: 0.338
[    81.751] (II) intel(0): Supported established timings:
[    81.751] (II) intel(0): 720x400@70Hz
[    81.751] (II) intel(0): 640x480@60Hz
[    81.751] (II) intel(0): 640x480@67Hz
[    81.751] (II) intel(0): 640x480@72Hz
[    81.751] (II) intel(0): 640x480@75Hz
[    81.751] (II) intel(0): 800x600@56Hz
[    81.751] (II) intel(0): 800x600@60Hz
[    81.751] (II) intel(0): 800x600@72Hz
[    81.751] (II) intel(0): 800x600@75Hz
[    81.751] (II) intel(0): 832x624@75Hz
[    81.751] (II) intel(0): 1024x768@60Hz
[    81.751] (II) intel(0): 1024x768@70Hz
[    81.751] (II) intel(0): 1024x768@75Hz
[    81.751] (II) intel(0): 1280x1024@75Hz
[    81.751] (II) intel(0): Manufacturer's mask: 0
[    81.751] (II) intel(0): Supported detailed timing:
[    81.751] (II) intel(0): clock: 135.0 MHz   Image Size:  340 x 270 mm
[    81.751] (II) intel(0): h_active: 1280  h_sync: 1296  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    81.751] (II) intel(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    81.751] (II) intel(0): Serial No: T7KB27AG04909
[    81.751] (II) intel(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 80 kHz, PixClock max 135 MHz
[    81.751] (II) intel(0): Monitor name: EN-7100s
[    81.751] (II) intel(0): EDID (in hex):
[    81.751] (II) intel(0): 	00ffffffffffff00160981e72d130000
[    81.751] (II) intel(0): 	1e0c010368221b782af596a3584d9624
[    81.751] (II) intel(0): 	195256bfef0001010101010101010101
[    81.751] (II) intel(0): 	010101010101bc34009851002a401090
[    81.751] (II) intel(0): 	1300540e11000018000000ff0054374b
[    81.751] (II) intel(0): 	42323741473034393039000000fd0037
[    81.751] (II) intel(0): 	4b1e500d000a202020202020000000fc
[    81.751] (II) intel(0): 	00454e2d37313030730a2020202000ea
[    81.751] (II) intel(0): Printing probed modes for output VGA1
[    81.751] (II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 -hsync -vsync (80.0 kHz eP)
[    81.751] (II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    81.751] (II) intel(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[    81.751] (II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    81.752] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    81.752] (II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    81.752] (II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    81.752] (II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    81.752] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    81.752] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    81.752] (II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    81.752] (II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[    81.752] (II) intel(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    81.752] (II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    81.752] (II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    81.756] (II) intel(0): EDID for output HDMI1
[    81.765] (II) intel(0): EDID for output DP1
[    81.765] (II) intel(0): Output LVDS1 connected
[    81.765] (II) intel(0): Output VGA1 connected
[    81.765] (II) intel(0): Output HDMI1 disconnected
[    81.765] (II) intel(0): Output DP1 disconnected
[    81.765] (II) intel(0): Using fuzzy aspect match for initial modes
[    81.765] (II) intel(0): Output LVDS1 using initial mode 1024x768
[    81.765] (II) intel(0): Output VGA1 using initial mode 1024x768
[    81.765] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    81.765] (II) intel(0): Kernel page flipping support detected, enabling
[    81.765] (==) intel(0): DPI set to (96, 96)
[    81.765] (II) Loading sub module "fb"
[    81.765] (II) LoadModule: "fb"
[    81.765] (II) Loading /usr/local/lib/xorg/modules/libfb.so
[    81.782] (II) Module fb: vendor="X.Org Foundation"
[    81.782] 	compiled for 1.17.4, module version = 1.0.0
[    81.782] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    81.782] (II) Loading sub module "dri2"
[    81.782] (II) LoadModule: "dri2"
[    81.782] (II) Module "dri2" already built-in
[    81.782] (II) UnloadModule: "fbdev"
[    81.782] (II) Unloading fbdev
[    81.782] (II) UnloadModule: "vesa"
[    81.782] (II) Unloading vesa
[    81.782] (==) Depth 24 pixmap format is 32 bpp
[    81.782] (II) intel(0): [DRI2] Setup complete
[    81.782] (II) intel(0): [DRI2]   DRI driver: i965
[    81.782] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[    81.827] (II) UXA(0): Driver registered support for the following operations:
[    81.827] (II)         solid
[    81.827] (II)         copy
[    81.827] (II)         composite (RENDER acceleration)
[    81.827] (II)         put_image
[    81.827] (II)         get_image
[    81.836] (==) intel(0): Backing store enabled
[    81.836] (==) intel(0): Silken mouse enabled
[    81.837] (II) intel(0): Initializing HW Cursor
[    81.837] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    81.850] (==) intel(0): DPMS enabled
[    81.850] (==) intel(0): Intel XvMC decoder enabled
[    81.850] (II) intel(0): Set up textured video
[    81.851] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    81.851] (II) intel(0): direct rendering: DRI2 Enabled
[    82.163] (--) RandR disabled



dmesg output:
=============

Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.3-RELEASE-p21 #0: Tue Jul 28 08:57:41 UTC 2015
    root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC i386
gcc version 4.2.1 20070831 patched [FreeBSD]
CPU: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz (2494.39-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x206a7  Family = 0x6  Model = 0x2a  Stepping = 7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x17bae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,AVX>
  AMD Features=0x28100000<NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 4294967296 (4096 MB)
avail memory = 3048456192 (2907 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TP-8H   >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0 <Version 2.0irqs 0-23 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software cryptoon motherboard
acpi0: <LENOVO TP-8Hon motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 20000000, 200000 (3) failed
acpi0: reservation of 40000000, 200000 (3) failed
cpu0: <ACPI CPUon acpi0
cpu1: <ACPI CPUon acpi0
cpu2: <ACPI CPUon acpi0
cpu3: <ACPI CPUon acpi0
hpet0: <High Precision Event Timeriomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clockport 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timerport 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHzport 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridgeport 0xcf8-0xcff on acpi0
pci0: <ACPI PCI buson pcib0
vgapci0: <VGA-compatible displayport 0x5000-0x503f mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
agp0: <SandyBridge mobile GT2+ IGon vgapci0
agp0: aperture size is 256M, detected 65532k stolen memory
vgapci0: Boot video device
pci0: <simple commsat device 22.0 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controllermem 0xd260a000-0xd260a3ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
hdac0: <Intel Cougar Point HDA Controllermem 0xd2600000-0xd2603fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridgeirq 16 at device 28.0 on pci0
pci1: <ACPI PCI buson pcib1
pcib2: <ACPI PCI-PCI bridgeirq 17 at device 28.1 on pci0
pci2: <ACPI PCI buson pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernetport 0x4000-0x40ff mem 0xd0404000-0xd0404fff,0xd0400000-0xd0403fff irq 17 at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x2c000000
re0: MAC rev. 0x00200000
miibus0: <MII buson re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interfacePHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: f0:de:f1:e1:73:7c
pcib3: <ACPI PCI-PCI bridgeirq 18 at device 28.2 on pci0
pci3: <ACPI PCI buson pcib3
pcib4: <ACPI PCI-PCI bridgeirq 19 at device 28.3 on pci0
pci8: <ACPI PCI buson pcib4
iwn0: <Intel Centrino Wireless-N 1000mem 0xd1d00000-0xd1d01fff irq 19 at device 0.0 on pci8
pcib5: <ACPI PCI-PCI bridgeirq 19 at device 28.7 on pci0
pci9: <ACPI PCI buson pcib5
ehci1: <EHCI (generic) USB 2.0 controllermem 0xd2609000-0xd26093ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
isab0: <PCI-ISA bridgeat device 31.0 on pci0
isa0: <ISA buson isab0
ahci0: <Intel Cougar Point AHCI SATA controllerport 0x5088-0x508f,0x5094-0x5097,0x5080-0x5087,0x5090-0x5093,0x5060-0x507f mem 0xd2608000-0xd26087ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channelat channel 0 on ahci0
ahcich4: <AHCI channelat channel 4 on ahci0
ahcich5: <AHCI channelat channel 5 on ahci0
acpi_acad0: <AC Adapteron acpi0
acpi_lid0: <Control Method Lid Switchon acpi0
acpi_tz0: <Thermal Zoneon acpi0
acpi_tz1: <Thermal Zoneon acpi0
atkbdc0: <Keyboard controller (i8042)port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboardirq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouseirq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Batteryon acpi0
acpi_ibm0: <IBM ThinkPad ACPI Extrason acpi0
pmtimer0 on isa0
orm0: <ISA Option ROMat iomem 0xc0000-0xcffff pnpid ORM0000 on isa0
sc0: <System consoleat flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGAat port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0: <ATA channelat port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1: <ATA channelat port 0x170-0x177,0x376 irq 15 on isa0
ppc0: parallel port not found.
est0: <Enhanced SpeedStep Frequency Controlon cpu0
p4tcc0: <CPU Frequency Thermal Controlon cpu0
est1: <Enhanced SpeedStep Frequency Controlon cpu1
p4tcc1: <CPU Frequency Thermal Controlon cpu1
est2: <Enhanced SpeedStep Frequency Controlon cpu2
p4tcc2: <CPU Frequency Thermal Controlon cpu2
est3: <Enhanced SpeedStep Frequency Controlon cpu3
p4tcc3: <CPU Frequency Thermal Controlon cpu3
Timecounters tick every 1.000 msec
hdacc0: <Conexant CX20590 HDA CODECat cad 0 on hdac0
hdaa0: <Conexant CX20590 Audio Function Groupat nid 1 on hdacc0
pcm0: <Conexant CX20590 (Analog)at nid 31 and 27 on hdaa0
pcm1: <Conexant CX20590 (Analog)at nid 25 and 35 on hdaa0
hdacc1: <Intel Cougar Point HDA CODECat cad 3 on hdac0
hdaa1: <Intel Cougar Point Audio Function Groupat nid 1 on hdacc1
pcm2: <Intel Cougar Point (HDMI/DP 8ch)at nid 5 on hdaa1
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ACPI Error: No handler for Region [ECRM] (0xc7c113c0) [EmbeddedControl] (20110527/evregion-421)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310)
ACPI Error: Method parse/execution failed [\134_TZ_.RDEC] (Node 0xc7babb20), AE_NOT_EXIST (20110527/psparse-560)
ACPI Error: Method parse/execution failed [\134_TZ_.TZS0._TMP] (Node 0xc7babac0), AE_NOT_EXIST (20110527/psparse-560)
ACPI Error: No handler for Region [ECRM] (0xc7c11500) [EmbeddedControl] (20110527/evregion-421)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310)
ACPI Error: Method parse/execution failed [\134_TZ_.MDEC] (Node 0xc7babb00), AE_NOT_EXIST (20110527/psparse-560)
ACPI Error: Method parse/execution failed [\134_TZ_.TZS0._SCP] (Node 0xc7baba80), AE_NOT_EXIST (20110527/psparse-560)
ugen0.1: <Intelat usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1on usbus0
ugen1.1: <Intelat usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1on usbus1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <HITACHI HTS727550A9E364 JF3ZD0H0ATA-8 SATA 2.x device
ada0: Serial Number J3350080GM11TC
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors: 1H 63S/T 16383C)
ada0: Previously was known as ad4
cd0 at ahcich4 bus 0 scbus1 target 0 lun 0
cd0: <PLDS DVD-RW DS8A8SH KL31Removable CD-ROM SCSI-0 device 
cd0: Serial Number S45N7592Z1ZKBE01AG4L
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 1247194466 Hz quality 1000
Root mount waiting for: usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
Root mount waiting for: usbus1 usbus0
ugen0.2: <vendor 0x8087at usbus0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2on usbus0
ugen1.2: <vendor 0x8087at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2on usbus1
uhub2: 6 ports with 6 removable, self powered
uhub3: 6 ports with 6 removable, self powered
Root mount waiting for: usbus1 usbus0
ugen0.3: <vendor 0x0409at usbus0
uhub4: <vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 3on usbus0
ugen1.3: <Logitechat usbus1
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 3on usbus1
kbd2 at ukbd0
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 3on usbus1
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 3on usbus1
uhub4: 4 ports with 4 removable, self powered
ugen0.4: <CHICONYat usbus0
ukbd1: <CHICONY USB NetVista Full Width Keyboard, class 0/0, rev 1.10/1.02, addr 4on usbus0
kbd3 at ukbd1
Root mount waiting for: usbus0
Root mount waiting for: usbus0
ugen0.5: <Ricoh Company Ltd.at usbus0
Trying to mount root from ufs:/dev/ada0s3a [rw]...
ACPI Error: No handler for Region [ECRM] (0xc7c11540) [EmbeddedControl] (20110527/evregion-421)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310)
ACPI Error: Method parse/execution failed [\134_TZ_.RDEC] (Node 0xc7babb20), AE_NOT_EXIST (20110527/psparse-560)
ACPI Error: Method parse/execution failed [\134_TZ_.TZS0._TMP] (Node 0xc7babac0), AE_NOT_EXIST (20110527/psparse-560)
acpi_tz0: error fetching current temperature -- AE_NOT_EXIST
wlan0: Ethernet address: 74:e5:0b:db:0e:20





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?slrnnftjvi.19e.varro>