Date: Wed, 17 Dec 2014 22:34:57 -0600 From: Adam Vande More <amvandemore@gmail.com> To: Shane Ambler <BSD@shaneware.biz> Cc: "freebsd-stable@freebsd.org" <freebsd-stable@freebsd.org>, Hans Petter Selasky <hselasky@freebsd.org>, mjg@freebsd.org, Alexander Motin <mav@freebsd.org>, Shane Ambler <FreeBSD@shaneware.biz>, John Baldwin <jhb@freebsd.org> Subject: Re: Help debugging stable/10 Message-ID: <CA%2BtpaK1JhOZcDwavKxtp8yAiN7Hzehe%2Bomup6gzR-s5X7==1dw@mail.gmail.com> In-Reply-To: <54923507.5030908@ShaneWare.Biz> References: <5488F58D.7060708@ShaneWare.Biz> <201412161129.57704.jhb@freebsd.org> <5490BF55.3020108@ShaneWare.Biz> <2129928.1Q3VzLjDQL@ralph.baldwin.cx> <54923507.5030908@ShaneWare.Biz>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Dec 17, 2014 at 7:59 PM, Shane Ambler <BSD@shaneware.biz> wrote: > > On 18/12/2014 01:00, John Baldwin wrote: > >> On Wednesday, December 17, 2014 09:55:09 AM Shane Ambler wrote: >> >>> I think it was in RC3 I got errors of - >>> xptioctl: pass driver is not in the kernel >>> xptioctl: put "device pass" in your kernel config file >>> a couple of times with the USB memstick - again not recently. >>> >> >> Interesting. Perhaps take 'pass' back out then as the cure seems worse >> than >> the disease. :) Can you figure out what processes are running when those >> errors are logged? Whatever is calling xptioctl() is triggering this I >> believe. >> >> > I haven't altered the kernel config. That was an old error I got a few > times when I had issues with the USB device insertion not registering. > I think I saw it 3 times and it was a continuous repeat on the console. > It only showed when things went bad so I wasn't convinced I needed to add > it. Just mentioned as it appeared to be USB related and might hint > to what triggers the USB system to falter. > > Could be a red herring too. There are previous mentions of that error being tickled by hald. Disabling it or preventing it from attacking your device might be a workaround. -- Adam
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CA%2BtpaK1JhOZcDwavKxtp8yAiN7Hzehe%2Bomup6gzR-s5X7==1dw>