Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 31 Jul 2001 08:44:33 +0200
From:      Martin Kraemer <Martin.Kraemer@Fujitsu-Siemens.com>
To:        Mike Harding <mvh@ix.netcom.com>
Cc:        freebsd-stable@FreeBSD.ORG
Subject:   Re: Continuing ahc problems - also cause fxp failure
Message-ID:  <20010731084433.A9527@deejai2.mch.fsc.net>
In-Reply-To: <20010731041440.4310C1314C@netcom1.netcom.com>; from mvh@ix.netcom.com on Mon, Jul 30, 2001 at 09:14:40PM -0700
References:  <200107301812.f6UIC8b19427@cwsys.cwsent.com> <20010731041440.4310C1314C@netcom1.netcom.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Jul 30, 2001 at 09:14:40PM -0700, Mike Harding wrote:
> 
> Our DAT occasionally locks up, and the hardware is fairly generic -
> Intel SMP board and HP DAT drive... you can see the DAT seize up at
> the end of this 'dmesg' and this happens once or twice a week.
> 
> - Mike H.
> fxp0: promiscuous mode disabled
Oh?! The thread in may began with the fxp & ahc combo.
> (sa0:ahc0:0:3:0): SCB 0x2 - timed out while idle, SEQADDR == 0x8
> ahc0: Bus Device Reset on A:3. 1 SCBs aborted
> (sa0:ahc0:0:3:0): SCB 0x32 - timed out while idle, SEQADDR == 0x8
> ahc0: Bus Device Reset on A:3. 1 SCBs aborted
> (sa0:ahc0:0:3:0): WRITE FILEMARKS. CDB: 10 0 0 0 1 0 
> (sa0:ahc0:0:3:0): UNIT ATTENTION asc:29,0
> (sa0:ahc0:0:3:0): Power on, reset, or bus device reset occurred
> (sa0:ahc0:0:3:0): failed to write terminating filemark(s)
> (sa0:ahc0:0:3:0): tape is now frozen- use an OFFLINE, REWIND or MTEOM command to clear this state.

Uh oh!
Only thing is, I *never* observed lockups like that under FreeBSD-4.2-RELEASE!
I had occasional resets when fiddling with IPv6 routing, but that is
a different problem.
SCSI with exactly the same HW I use now was _rock_solid_ in FreeBSD-4.2-RELEASE.

   Martin
-- 
<Martin.Kraemer@Fujitsu-Siemens.com>         |     Fujitsu Siemens
Fon: +49-89-636-46021, FAX: +49-89-636-41143 | 81730  Munich,  Germany

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010731084433.A9527>