Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 29 Jan 2009 14:34:14 -0500
From:      Adam K Kirchhoff <adamk@voicenet.com>
To:        freebsd-net@freebsd.org
Cc:        Sam Leffler <sam@freebsd.org>
Subject:   Re: iwi doesn't see a wireless network
Message-ID:  <20090129143414.67a0be59@scroll>
In-Reply-To: <20090128042315.6ec604f7@sorrow.ashke.com>
References:  <20090127085941.5d642cde@memory.visualtech.com> <497FCE52.9080800@freebsd.org> <20090128042315.6ec604f7@sorrow.ashke.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 28 Jan 2009 04:23:15 -0500
Adam K Kirchhoff <adamk@voicenet.com> wrote:

> On Tue, 27 Jan 2009 19:17:38 -0800
> Sam Leffler <sam@freebsd.org> wrote:
> 
> > Adam K Kirchhoff wrote:
> > > I'm trying to get my laptop to connect to the wireless access point at
> > > work. It has a Intel Pro Wireless 2200BG minipci card, and can
> > > associate with my access point at home. In addition, I can get an
> > > Ubuntu 8.10 liveCD to connect to the access point at work via
> > > NetworkManager. So there is definitely no incompatibility between the
> > > wireless card and access point.
> > >
> > > Here's my wpa_supplicant.conf file:
> > >
> > > network={
> > > 	ssid="Mckella280Front"
> > > 	key_mgmt=WPA-PSK
> > > 	pairwise=TKIP
> > > 	psk="#########"
> > > }
> > >
> > > The preshared key is definitely correct, as it's the one that works
> > > with the liveCD. For the sake of testing, I've removed the reference to
> > > my wireless AP at home.
> > >
> > > I'm attaching the output from wpa_supplicant run with -dd.  Basically,
> > > it keeps scanning but only ever sees the tmobile network.  That's
> > > actually coming from another person in the building using a tmobile
> > > wireless broadband card. If she's not here, the scan never picks up
> > > anything. Similarly, 'ifconfig iwi0 list scan' only picks up the
> > > tmobile ssid.
> > >
> > > Yet, if I reboot off the liveCD, it works. Here's the output of 'iwlist
> > > eth1 scanning' under the liveCD:
> > >
> > > eth1      Scan completed :
> > >           Cell 01 - Address: 00:22:6B:9A:CC:AF
> > >                     ESSID:"Mckella280Front"
> > >                     Protocol:IEEE 802.11bg
> > >                     Mode:Master
> > >                     Frequency:2.457 GHz (Channel 10)
> > >                     Encryption key:on
> > >                     Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
> > >                               9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
> > >                               48 Mb/s; 54 Mb/s
> > >                     Quality=50/100  Signal level=-68 dBm  
> > >                     IE: WPA Version 1
> > >                         Group Cipher : TKIP
> > >                         Pairwise Ciphers (1) : TKIP
> > >                         Authentication Suites (1) : PSK
> > >                     IE: IEEE 802.11i/WPA2 Version 1
> > >                         Group Cipher : TKIP
> > >                         Pairwise Ciphers (1) : CCMP
> > >                         Authentication Suites (1) : PSK
> > >                     Extra: Last beacon: 904ms ago
> > >
> > >
> > > And, iwconfig while connected:
> > >
> > > eth1      IEEE 802.11g  ESSID:"Mckella280Front"  
> > >           Mode:Managed  Frequency:2.457 GHz  Access Point: 00:22:6B:9A:CC:AF   
> > >           Bit Rate:54 Mb/s   Tx-Power=20 dBm   Sensitivity=8/0  
> > >           Retry limit:7   RTS thr:off   Fragment thr:off
> > >           Power Management:off
> > >           Link Quality=59/100  Signal level=-66 dBm  Noise level=-87 dBm
> > >           Rx invalid nwid:0  Rx invalid crypt:6  Rx invalid frag:0
> > >           Tx excessive retries:0  Invalid misc:0   Missed beacon:3
> > >
> > > The only thing I can think of is that the AP is using some feature that
> > > the iwi driver, or wpa_supplicant, doesn't support.
> > >
> > > Is there someway to get this working?
> > >
> > >   
> > You don't indicate a freebsd version.  Is your ap configured to hide the 
> > ssid?
> > 
> >     Sam
> > 
> > 
> 
> Sorry.  This is: FreeBSD 7.1-STABLE #1: Fri Jan 23 11:41:10 EST 2009 
> 
> And no, the AP does not hide the ssid.  It shows up in NetworkManager
> on the LiveCD without any extra configuration (just asking for the key
> when I select it).  But, just to be sure, I've tried setting scan_ssid
> to 1 in wpa_supplicant.conf, too, but that didn't change anything.
> 
> Adam

If there are no other ideas, I'll go ahead and open up a pr about this.

Adam

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090129143414.67a0be59>