Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 17 Jun 2008 08:23:46 +1200
From:      "Rohit Grover" <rgrover1@gmail.com>
To:        freebsd-x11@freebsd.org
Subject:   failing to start X on my Core 2 Duo macbook (No devices detected)
Message-ID:  <426bed110806161323q6b87766cs6ea3a23a5e61ece8@mail.gmail.com>

next in thread | raw e-mail | index | archive | help
Hello,

I'm having trouble configuring Xorg on my Core 2 Duo Apple MacBook.
I have followed instructions from a blog at
http://goddess-gate.com/dc2/index.php/post/251 in installing Freebsd7.0
Release on it.
I have rebuilt the kernel with the following added to the config:

> device          drm                         # Enable graphic acceleration (base support).
> device          i915drm                     # Enable graphic acceleration (i945GM support).
>
> The laptop has an Intel GMA965 X3100 chipset which shows up as Intel Mobile
GMA965/GL960 using 'pciconf -lv' on pci channel 0:2:1.
While running xorgconfig, I specified the use of "i810" (option 16) as the
graphic controller--this was in accordance with the instructions from the
blog above.
The following is an excerpt from the blog which applies to my Xorg
configuration:

> Graphic card setup
>
> When you're asked if you want to parse graphic cards list, answer "y".
> The graphic controller to use is "i810" (option 16).
> Installed memory is "65536K" (option 9).
> Identifier should be "GMA950" (I used GMA965).
> Leave modes as is (answer "4").
> Default mode will be 24 bits (answer "5").
>

Unfortunately, with this configuration, my X server doesn't start and gives
the following error:

> (EE) No devices detected.
> Fatal server error:
> no screens found
>

The FAQ from Xorg
(http://www.x.org/wiki/FAQErrorMessages#head-93b1e0b56f76546d61364f789045e9c745b6cfd4)
claims that:

It is very likely that your xorg.conf file doesn't contain the
> correct driver(s) for the chipset(s) in your system or that your
> chipset isn't supported by any of the drivers.


Could someone please help me with figuring out what drivers should I be
using for my chipset?

regards,



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?426bed110806161323q6b87766cs6ea3a23a5e61ece8>