Date: Sat, 23 Aug 1997 13:52:40 -0400 (EDT) From: Chuck Robey <chuckr@glue.umd.edu> To: Stefan Esser <se@FreeBSD.ORG> Cc: Glenn Johnson <gjohnson@nola.srrc.usda.gov>, freebsd-current@FreeBSD.ORG Subject: Re: NCR SCSI will not boot Message-ID: <Pine.BSF.3.96.970823135009.280A-100000@Journey2.mat.net> In-Reply-To: <19970823100018.53031@mi.uni-koeln.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, 23 Aug 1997, Stefan Esser wrote: > On Aug 21, Chuck Robey <chuckr@glue.umd.edu> wrote: > > On Thu, 21 Aug 1997, Glenn Johnson wrote: > > > > > ncr0: <ncr 53c825a fast10 wide scsi> rev 0x11 int a irq 11 on pci0.14.0 > > > ncr0: minsync=25, maxsync=206, maxoffs=8, 128 dwords burst, large dma fifo > > A rev. 0x11 chip ? > > Well, looking at a message Chuck sent before: > > > ncr0: <ncr 53c825a fast10 wide scsi> rev 0x11 int a irq 10 on pci0.20.0 > > I need to make sure, that there is not a problem > with that particular revision of the chip. Does > the driver work with rev 0x11 somewhere, or is it > only 0x10 or (don't know if it exists) 0x12, that > works ??? That's interesting, Stefan. The board I swapped in that works is a rev 13 board, according to dmesg: ncr0: <ncr 53c825a fast10 wide scsi> rev 0x13 int a irq 10 on pci0.20.0 The rev 11 board was the original one. > > Regards, STefan > > ----------------------------+----------------------------------------------- Chuck Robey | Interests include any kind of voice or data chuckr@eng.umd.edu | communications topic, C programming, and Unix. 213 Lakeside Drive Apt T-1 | Greenbelt, MD 20770 | I run Journey2 and picnic, both FreeBSD (301) 220-2114 | version 3.0 current -- and great FUN! ----------------------------+-----------------------------------------------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.970823135009.280A-100000>