Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 23 Mar 2008 09:31:58 +1100
From:      Edwin Groothuis <edwin@mavetju.org>
To:        Ulf Zimmermann <ulf@Alameda.net>
Cc:        freebsd-proliant@freebsd.org
Subject:   Re: Love to hate iLO ...
Message-ID:  <20080322223158.GA15340@k7.mavetju>
In-Reply-To: <20080322220100.GG26105@evil.alameda.net>
References:  <24B7C28CEC086FAB879910E4@ganymede.hub.org> <20080316210435.R2097@shanty.ipnstock.com> <20080322220100.GG26105@evil.alameda.net>

next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, Mar 22, 2008 at 03:01:00PM -0700, Ulf Zimmermann wrote:
> On Sun, Mar 16, 2008 at 09:09:42PM -0400, Brad Miele wrote:
> > Out of 8 dl3x machines that i have, your experience describes only one of 
> > them. I had one where the iLO hung as you described and even cold resets 
> > wouldn't bring it back. HP said that it was most likely the board, and 
> > wanted to replace it. But for whatever reason, I never got them in to do 
> > it. So I went on hope that this Achilles heel machine would stay up. 
> > Ultimately it crashed hard, and the saving grace was that for some 
> > reason, that final remote hands reset brought the iLO back to life and I 
> > was able to fsck through it. It has been up since, about 4 months.
> 
> We currently have about 200 HP servers and once in a while I will get
> iLOs which need a hard reset (remove power from system). But if iLO
> starts to become unresponsive, a reset from OS (Linux in our case *sigh*)
> will usual bring it back up. Even the OS reset is not very often.

Once in a while we just need to restart the network part of it, but
that can be done by taking out the cable and putting it back in.
Or as we do: reboot the iLO-switch (which is a dumb 10/100 Mb
switch).

There is a more serious issue, when you ~. out of an SSH session
while you are in the remote console. That requires a cold reboot
of the whole system (i.e. not only a "power off" from inside the
iLO, but a full pwoer down of the system).

Edwin
-- 
Edwin Groothuis      |            Personal website: http://www.mavetju.org
edwin@mavetju.org    |              Weblog: http://www.mavetju.org/weblog/



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20080322223158.GA15340>