Date: Tue, 12 Feb 2002 14:51:19 -0600 From: mikea <mikea@mikea.ath.cx> To: Jason Andresen <jandrese@mitre.org> Cc: John Merryweather Cooper <john_m_cooper@yahoo.com>, Lev Serebryakov <lev@serebryakov.spb.ru>, Freebsd-Stable <freebsd-stable@FreeBSD.ORG> Subject: Re: ABit VP6 (VIA Appolo Pro133A) hardware monitoring Message-ID: <20020212145119.A33839@mikea.ath.cx> In-Reply-To: <3C6932F3.D9DEB0C1@mitre.org>; from jandrese@mitre.org on Tue, Feb 12, 2002 at 10:21:23AM -0500 References: <1585891578.20020212012741@serebryakov.spb.ru> <20020211144501.C45459@johncoop.MSHOME> <3C6932F3.D9DEB0C1@mitre.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Feb 12, 2002 at 10:21:23AM -0500, Jason Andresen wrote: > John Merryweather Cooper wrote: > > > > Try xmbmon at sysutils/xmbmon. It works with VIA chipsets (I have a > > VT82C686B also and it works fine). > > > > On 2002.02.11 14:27 Lev Serebryakov wrote: > > > Hello, Freebsd-Stable! How are you? > > > > > > I've buy ABIt VP6 motherboard (dual Pro133A-based motherboard). It > > > works perfectly (with two CPUs), HPT370 Raid works too. > > > > > > But I could not get any values from hardware monitoring. There is NO > > > `viapm' driver (like `intpm' or `alpm') and this monitoring is > > > VT82C686B-based, not LM7x-based, so lmmon and other such programs > > > from ports doesn't work too. > > > > > > Could I get my CPUs' temperatures and Fans' speeds under FreeBSD? > > Hmm, no dice on my VT82C686B (VT8366A + VT8233): > > <escaflowne/p8> (240 ~): sudo mbmon -d > * SMBus[VIA8233(KT266)] found, but No HWM available on it!! > Using ISA-IO access method!! > MainSMBusADDR(CR48) = 5A > SubSMBusADDRs(CR4A) = 90, 90 [Temp1 exists, Temp2 exists] > DeviceID(CR49&0xFE) = 0 > VenderID(CR4E=0,CR4F)= 0 > ChipID(CR58) = 90 > * ITE Chip, IT8705F found > Warning: Temp1 address is wrong ?? > > And this is on the latest version (not the one in the port). Try it without the "-d". Works here: : sudo mbmon -d : Using VIA686 HWM directly!! : MainSMBusADDR(CR48) = 5A : SubSMBusADDRs(CR4A) = 90, 90 [Temp1 exists, Temp2 exists] : DeviceID(CR49&0xFE) = CC : VenderID(CR4E=0,CR4F)= 0 : ChipID(CR58) = 1 : * VIA Chip, VT82C686A/B found : Warning: Temp1 address is wrong ?? : : sudo mbmon : [No write since last change] : Temp.= 65.7, 52.5, 0.0; Rot.= 6308, 6367, 0 : Vcore = 1.72, 1.69; Volt. = 3.30, 4.98, 12.19, 0.00, 0.00 : Temp.= 66.6, 52.5, 0.0; Rot.= 6308, 6428, 0 : Vcore = 1.72, 1.70; Volt. = 3.30, 4.98, 12.19, 0.00, 0.00 with a 686A chip. -- Mike Andrews mikea@mikea.ath.cx Tired old sysadmin since 1964 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020212145119.A33839>