Date: Wed, 20 Apr 2011 14:22:47 +0100 From: Paul Thornton <prt@prt.org> To: Marius Strobl <marius@alchemy.franken.de> Cc: pyunyh@gmail.com, freebsd-net@freebsd.org Subject: Re: Broadcom BCM57765 support? Message-ID: <4DAEDE27.8080205@prt.org> In-Reply-To: <20110420131613.GA84319@alchemy.franken.de> References: <4DADD913.5010208@prt.org> <20110419220907.GD1637@michelle.cdnetworks.com> <4DAEBB67.7070303@prt.org> <20110420131613.GA84319@alchemy.franken.de>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, On 20/04/2011 14:16, Marius Strobl wrote: > Looks like brgphy(4) also needs to be taught about this hardware. Could > you please provide the corresponding part of a verbose dmesg? Hopefully this covers everything that you might need: pcib4: slot 0 INTA is routed to irq 18 found-> vendor=0x14e4, dev=0x16bc, revid=0x00 domain=0, bus=4, slot=0, func=1 class=08-05-01, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=7 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Prefetchable Memory, range 64, base 0x93120000, size 16, enabled pcib4: requested memory range 0x93120000-0x9312ffff: good pcib0: matched entry for 0.22.INTB (src \\_SB_.PCI0.Z00O:0) pci_link13: Picked IRQ 19 with weight 1 pcib0: slot 22 INTB routed to irq 19 via \\_SB_.PCI0.Z00O pcib4: slot 0 INTB is routed to irq 19 bge0: <Broadcom unknown BCM57765, ASIC rev. 0x57785000> mem 0x93100000-0x9310ffff,0x93110000-0x9311ffff irq 18 at device 0.0 on pci4 bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0x93100000 bge0: attempting to allocate 1 MSI vectors (8 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 56 bge0: using IRQ 256 for MSI bge0: CHIP ID 0x57785000; ASIC REV 0x57785; CHIP REV 0x577850; PCI-E bge0: Disabling fastboot bge0: Disabling fastboot miibus0: <MII bus> on bge0 ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0 ukphy0: OUI 0x00d897, model 0x0024, rev. 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: bpf attached bge0: Ethernet address: c4:2c:03:08:0b:9d bge0: [MPSAFE] bge0: [FILTER] Many thanks, Paul.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4DAEDE27.8080205>