Date: Sun, 06 Feb 2005 21:43:25 +0900 (JST) From: Hideyuki KURASHINA <rushani@bl.mmtr.or.jp> To: sos@DeepCore.dk Cc: freebsd-stable@freebsd.org Subject: Re: ATA mkIII first official patches - please test! Message-ID: <20050206.214325.85708834.rushani@bl.mmtr.or.jp> In-Reply-To: <42028F29.1030801@DeepCore.dk> References: <42028F29.1030801@DeepCore.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, S=F8ren >>> On Thu, 03 Feb 2005 21:52:57 +0100, S=F8ren Schmidt <sos@DeepCore.d= k> said: > ATA-mkIII first official snapshot. [...] > No changes are needed to your config file, unless you want ATA as mod= ules. I've tested your patches using same config file as before, and it seems= work fine except on resume. After suspend, my ThinkPad X40 now hangs with following logs (copied by hand): (Fn + F4 key combo to enter suspend) acpi_ec0: info: new max delay is 80 us IBM:NOTIFY:80 notify:1004 acpi_lid0: wake_prep enabled for \_SB_.LID_ (S3) acpi_button0: wake_prep enabled for \_SB_.SLPB (S3) (Fn key to resume back ) AcpiOsDerivePciId: bus 0 dev 31 func 1 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D acpi_printcpu() debug dump =3D=3D= =3D=3D gdt[0077:c0667c20] idt[07ff:c0677fe0] ldt[0030] tr[0020] elf[00000086= ] eax[00000001] ebx[00000000] ecx[00000000] edx[00000004] esi[c1beedc8] edi[80045003] ebp[d4ebbc3c] esp[d4ebbc10] cr0[8005003b] cr2[0804a314] cr3[14f1b000] cr4[00000691] cs[0008] ds[0010] es[0010] fs[0018] gs[008f] ss[0010] =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D acpi_printcpu() debug dump =3D=3D= =3D=3D gdt[0077:c0667c20] idt[07ff:c0667fe0] ldt[0030] tr[0020] elf[00000002= ] eax[00000046] ebx[00000000] ecx[00000000] edx[c1991cf0] esi[c1beedc8] edi[80045003] ebp[d4ebbc3c] esp[d4ebbc10] cr0[8005003b] cr2[0804a314] cr3[14f1b000] cr4[00000091] cs[0008] ds[0010] es[0010] fs[0018] gs[008f] ss[0010] acpi_lid0: run_prep cleaned up for \_SB_.LID_ acpi_button0: run_prep cleand up for \_SB_.SLPB acpi_ec0: info: new max delay is 100 us While ``bus 0 dev 31 func 1'' is atapic0 (Intel ICH4 UDMA100 controller= ), it seems there's no helpful ATA related message though. However, I got= curious behaviors, i.e. o Hard disk actively drives, thus HDD indicator nearly holds on light= ing o A status indicator for event blinks on and off, periodicaly I'm using kernel & modules as of yesterday (HEAD). Without applying your patches, the resume works fine. Is this problem included in your task list, or am I alone? My config file and complete dmesg on start up (booted with -v flag) is attached below, -- rushani =0C # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section o= n # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelco= nfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files.= # If you are in doubt as to the purpose or necessity of a line, check f= irst # in NOTES. # # $rushani: TPX40,v 1.6 2004/12/08 09:27:42 hideyuki Exp $ # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.413.2.6.2.2 2004/10/24 18:02:= 52 scottl Exp $ machine i386 #cpu I486_CPU #cpu I586_CPU cpu I686_CPU ident TPX40 # To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" # Default places to look for devices. #makeoptions DEBUG=3D-g # Build kernel with gdb(1) debug symbols options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories #options MD_ROOT # MD is a potential root device #options NFSCLIENT # Network Filesystem Client #options NFSSERVER # Network Filesystem Server #options NFS_ROOT # NFS usable as /, requires NFSCLIENT #options MSDOSFS # MSDOS Filesystem #options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) #options PSEUDOFS # Pseudo-filesystem framework options GEOM_GPT # GUID Partition Tables. options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options COMPAT_FREEBSD4 # Compatible with FreeBSD4 options SCSI_DELAY=3D2000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support #options SYSVSHM # SYSV-style shared memory #options SYSVMSG # SYSV-style message queues #options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensi= ons options KBD_INSTALL_CDEV # install a CDEV entry in /dev #options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. #options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. options ADAPTIVE_GIANT # Giant mutex is adaptive. options DEVICE_POLLING # polling(4) options SC_DISABLE_REBOOT # Disable reboot key sequence options INCLUDE_CONFIG_FILE # Include this file in kernel # Debugging for use in -current options KDB # Enable kernel debugger support. options DDB # Support DDB. #options GDB # Support remote GDB. options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures= , required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #device apic # I/O APIC # Bus support. Do not remove isa, even if you have no isa slots device isa #device eisa device pci # Floppy drives #device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives #device ataraid # ATA RAID drives #device atapicd # ATAPI CDROM drives #device atapifd # ATAPI floppy drives #device atapist # ATAPI tape drives options ATA_STATIC_ID # Static device numbering # SCSI Controllers #device ahb # EISA AHA1742 family #device ahc # AHA2940 and onboard AIC7xxx devices #device ahd # AHA39320/29320 and onboard AIC79xx devices #device amd # AMD 53C974 (Tekram DC-390(T)) #device isp # Qlogic family #device mpt # LSI-Logic MPT-Fusion #device ncr # NCR/Symbios Logic #device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') #device trm # Tekram DC395U/UW/F DC315U adapters #device adv # Advansys SCSI adapters #device adw # Advansys wide SCSI adapters #device aha # Adaptec 154x SCSI adapters #device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. #device bt # Buslogic/Mylex MultiMaster SCSI adapters #device ncv # NCR 53C500 #device nsp # Workbit Ninja SCSI-3 #device stg # TMC 18C30/18C50 # SCSI peripherals device scbus # SCSI bus (required for SCSI) #device ch # SCSI media changers device da # Direct Access (disks) #device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) #device ses # SCSI Environmental Services (and SAF-TE) # RAID controllers interfaced to the SCSI subsystem #device amr # AMI MegaRAID #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID #device ciss # Compaq Smart RAID 5* #device dpt # DPT Smartcache III, IV - See NOTES for options #device hptmv # Highpoint RocketRAID 182x #device iir # Intel Integrated RAID #device ips # IBM (Adaptec) ServeRAID #device mly # Mylex AcceleRAID/eXtremeRAID #device twa # 3ware 9000 series PATA/SATA RAID # RAID controllers #device aac # Adaptec FSA RAID #device aacp # SCSI passthrough for aac (requires CAM) #device ida # Compaq Smart RAID #device mlx # Mylex DAC960 family #device pst # Promise Supertrak SX6000 #device twe # 3ware ATA RAID # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device vga # VGA video card driver device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc # Enable this for the pcvt (VT220 compatible) console driver #device vt #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor #device agp # support several AGP chipsets # Floating point support - do not disable. device npx # Power management support (see NOTES for more options) #device apm # Add suspend/resume support for the i8254. device pmtimer # PCCARD (PCMCIA) support # PCMCIA and cardbus bridge support #device cbb # cardbus (yenta) bridge #device pccard # PC Card (16-bit) bus #device cardbus # CardBus (32-bit) bus # Serial (COM) ports #device sio # 8250, 16[45]50 based serial ports # Parallel port #device ppc #device ppbus # Parallel port bus (required) #device lpt # Printer #device plip # TCP/IP over parallel #device ppi # Parallel port interface device #device vpo # Requires scbus and da # If you've got a "dumb" serial or parallel PCI card that is # supported by the puc(4) glue driver, uncomment the following # line to enable it (connects to the sio and/or ppc drivers): #device puc # PCI Ethernet NICs. #device de # DEC/Intel DC21x4x (``Tulip'') #device em # Intel PRO/1000 adapter Gigabit Ethernet Card #device ixgb # Intel PRO/10GbE Ethernet Card #device txp # 3Com 3cR990 (``Typhoon'') #device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these = NICs! #device miibus # MII bus support #device bfe # Broadcom BCM440x 10/100 Ethernet #device bge # Broadcom BCM570xx Gigabit Ethernet #device dc # DEC/Intel 21143 and various workalikes #device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device lge # Level 1 LXT1001 gigabit ethernet #device nge # NatSemi DP83820 gigabit ethernet #device pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc') #device re # RealTek 8139C+/8169/8169S/8110S #device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet #device ste # Sundance ST201 (D-Link DFE-550TX) #device ti # Alteon Networks Tigon I/II gigabit Ethernet #device tl # Texas Instruments ThunderLAN #device tx # SMC EtherPower II (83c170 ``EPIC'') #device vge # VIA VT612x gigabit ethernet #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. pccard NICs included. #device cs # Crystal Semiconductor CS89x0 NIC # 'device ed' requires 'device miibus' #device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards #device ex # Intel EtherExpress Pro/10 and Pro/10+ #device ep # Etherlink III based cards #device fe # Fujitsu MB8696x based cards #device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc. #device lnc # NE2100, NE32-VL Lance Ethernet cards #device sn # SMC's 9000 series of Ethernet chips #device xe # Xircom pccard Ethernet # ISA devices that use the old ISA shims #device le # Wireless NIC cards #device wlan # 802.11 support #device an # Aironet 4500/4800 802.11 wireless NICs. #device awi # BayStack 660 and others #device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. #device wl # Older non 802.11 Wavelan wireless NIC. # Pseudo devices. device loop # Network loopback #device mem # Memory and kernel memory devices #device io # I/O device #device random # Entropy device device ether # Ethernet support #device sl # Kernel SLIP #device ppp # Kernel PPP #device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) #device md # Memory "disks" #device gif # IPv6 and IPv4 tunneling #device faith # IPv6-to-IPv4 relaying (translation) # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! device bpf # Berkeley packet filter # USB support #device uhci # UHCI PCI->USB interface #device ohci # OHCI PCI->USB interface #device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices #device ugen # Generic #device uhid # "Human Interface Devices" #device ukbd # Keyboard #device ulpt # Printer #device umass # Disks/Mass storage - Requires scbus and da #device ums # Mouse #device urio # Diamond Rio 500 MP3 player #device uscanner # Scanners # USB Ethernet, requires mii #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet # FireWire support #device firewire # FireWire bus code #device sbp # SCSI over FireWire (Requires scbus and da) #device fwe # Ethernet over FireWire (non-standard!) # System Management Bus (SMB) device smbus device ichsmb device smb #device ath #device ath_hal #device ath_rate_onoe #device wlan #device wlan_wep =0C Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 199= 4 The Regents of the University of California. All rights reserved. FreeBSD 6.0-CURRENT #10: Sun Feb 6 21:23:04 JST 2005 hideyuki@tpx40.rushani.jp:/usr/obj/usr/src/sys/TPX40 WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc08fb000. Preloaded elf module "/boot/kernel/cd9660.ko" at 0xc08fb1c4. Preloaded elf module "/boot/kernel/ntfs.ko" at 0xc08fb270. Preloaded elf module "/boot/kernel/nullfs.ko" at 0xc08fb31c. Preloaded elf module "/boot/kernel/linux.ko" at 0xc08fb3c8. Preloaded elf module "/boot/kernel/sysvshm.ko" at 0xc08fb474. Preloaded elf module "/boot/kernel/sysvsem.ko" at 0xc08fb520. Preloaded elf module "/boot/kernel/sysvmsg.ko" at 0xc08fb5cc. Preloaded elf module "/boot/kernel/if_tun.ko" at 0xc08fb678. Preloaded elf module "/boot/kernel/ipfw.ko" at 0xc08fb724. Preloaded elf module "/boot/kernel/if_em.ko" at 0xc08fb7d0. Preloaded elf module "/boot/kernel/if_ep.ko" at 0xc08fb87c. Preloaded elf module "/boot/kernel/elink.ko" at 0xc08fb928. Preloaded elf module "/boot/kernel/if_wi.ko" at 0xc08fb9d4. Preloaded elf module "/boot/kernel/wlan.ko" at 0xc08fba80. Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc08fbb2c. Preloaded elf module "/boot/kernel/sound.ko" at 0xc08fbbd8. Preloaded elf module "/boot/kernel/usb.ko" at 0xc08fbc84. Preloaded elf module "/boot/kernel/ugen.ko" at 0xc08fbd2c. Preloaded elf module "/boot/kernel/umass.ko" at 0xc08fbdd8. Preloaded elf module "/boot/kernel/umodem.ko" at 0xc08fbe84. Preloaded elf module "/boot/kernel/ucom.ko" at 0xc08fbf30. Preloaded elf module "/boot/kernel/agp.ko" at 0xc08fbfdc. Preloaded elf module "/boot/kernel/random.ko" at 0xc08fc084. Preloaded elf module "/boot/kernel/speaker.ko" at 0xc08fc130. Preloaded elf module "/boot/kernel/if_ath.ko" at 0xc08fc1dc. Preloaded elf module "/boot/kernel/ath_rate.ko" at 0xc08fc288. Preloaded elf module "/boot/kernel/ath_hal.ko" at 0xc08fc338. Preloaded elf module "/boot/kernel/wlan_wep.ko" at 0xc08fc3e4. Preloaded elf module "/boot/kernel/acpi_ibm.ko" at 0xc08fc494. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08fc544. Preloaded elf module "/boot/kernel/io.ko" at 0xc08fc5f0. Preloaded elf module "/boot/kernel/mem.ko" at 0xc08fc698. Preloaded elf module "/boot/kernel/cbb.ko" at 0xc08fc740. Preloaded elf module "/boot/kernel/exca.ko" at 0xc08fc7e8. Preloaded elf module "/boot/kernel/pccard.ko" at 0xc08fc894. Preloaded elf module "/boot/kernel/cardbus.ko" at 0xc08fc940. Preloaded elf module "/boot/modules/est.ko" at 0xc08fc9ec. Enhanced Speedstep running at 1400 MHz Calibrating clock(s) ... i8254 clock: 1193169 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1395476624 Hz CPU: Intel(R) Pentium(R) M processor 1.40GHz (1395.48-MHz 686-class CPU= ) Origin =3D "GenuineIntel" Id =3D 0x6d6 Stepping =3D 6 Features=3D0xafe9fbbf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PG= E,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> real memory =3D 527302656 (502 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c25000 - 0x000000001edd8fff, 505102336 bytes (123316 pages)= avail memory =3D 506757120 (483 MB) bios32: Found BIOS32 Service Directory header at 0xc00f6fd0 bios32: Entry =3D 0xfd740 (c00fd740) Rev =3D 0 Len =3D 1 pcibios: PCI BIOS entry at 0xfd6d0+0x1f8 pnpbios: Found PnP BIOS data at 0xc00f7050 pnpbios: Entry =3D f0000:b6c4 Rev =3D 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: wlan: <802.11 Link Layer> ath_rate: <Atsushi Onoe's rate control algorithm> random: <entropy source, Software, Yarrow> null: <null device, zero device> io: <I/O> mem: <memory> Pentium Pro MTRR support enabled ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <IBM TP-1U> on motherboard acpi0: [MPSAFE] acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x66,0x62 on acpi0= pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f904 pci_open(1a): mode1res=3D0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=3D060000] [hdr=3D80] is there (id=3D35808= 086) pcibios: BIOS version 2.10 Found $PIR table, 14 entries at 0xc00fdeb0 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 2 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 1 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 1 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 1 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 2 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 2 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 2 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 1 2 2 A 0x69 3 4 5 6 7 9 10 11 12 14 15 slot 1 2 2 B 0x6a 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 D 0x63 3 4 5 6 7 9 10 11 12 14 15 slot 2 9 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 slot 2 9 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 slot 2 9 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 2 9 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 9 1 A 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 9 2 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 9 2 B 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 1 A 0x68 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 D 0x6b 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12 14 15 AcpiOsDerivePciId: bus 0 dev 31 func 0 AcpiOsDerivePciId: bus 2 dev 0 func 0 AcpiOsDerivePciId: bus 0 dev 29 func 7 acpi0: Power Button (fixed) atpic: Programming IRQ9 as level/low AcpiOsDerivePciId: bus 0 dev 0 func 0 AcpiOsDerivePciId: bus 0 dev 0 func 1 acpi_ec0: info: new max delay is 70 us ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU (3 Cx states)> on acpi0 pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0 pci_link4: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link4: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link4: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link5: <ACPI PCI Link LNKF> irq 11 on acpi0 pci_link5: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link5: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link5: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link6: <ACPI PCI Link LNKG> on acpi0 pci_link6: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link6: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link6: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link7: <ACPI PCI Link LNKH> irq 11 on acpi0 pci_link7: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link7: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link7: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI: Found matching pin for 0.2.INTA at func 0: 11 ACPI: Found matching pin for 0.29.INTA at func 0: 11 ACPI: Found matching pin for 0.29.INTB at func 1: 11 ACPI: Found matching pin for 0.29.INTC at func 2: 11 ACPI: Found matching pin for 0.29.INTD at func 7: 11 ACPI: Found matching pin for 0.31.INTA at func 1: 255 ACPI: Found matching pin for 0.31.INTB at func 3: 11 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=3D0 found-> vendor=3D0x8086, dev=3D0x3580, revid=3D0x02 bus=3D0, slot=3D0, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0106, statreg=3D0x2090, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x3584, revid=3D0x02 bus=3D0, slot=3D0, func=3D1 class=3D08-80-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x0080, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x3585, revid=3D0x02 bus=3D0, slot=3D0, func=3D3 class=3D08-80-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0006, statreg=3D0x0080, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) map[10]: type 3, range 32, base e0000000, size 27, enabled map[14]: type 1, range 32, base d0000000, size 19, enabled map[18]: type 4, range 32, base 00001800, size 3, enabled pcib0: matched entry for 0.2.INTA (src \\_SB_.LNKA:0) pcib0: slot 2 INTA routed to irq 11 via \\_SB_.LNKA found-> vendor=3D0x8086, dev=3D0x3582, revid=3D0x02 bus=3D0, slot=3D2, func=3D0 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0003, statreg=3D0x0090, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 powerspec 1 supports D0 D1 D3 current D0 map[10]: type 3, range 32, base e8000000, size 27, enabled map[14]: type 1, range 32, base d0080000, size 19, enabled found-> vendor=3D0x8086, dev=3D0x3582, revid=3D0x02 bus=3D0, slot=3D2, func=3D1 class=3D03-80-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0003, statreg=3D0x0090, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) powerspec 1 supports D0 D1 D3 current D0 map[20]: type 4, range 32, base 00001820, size 5, enabled pcib0: matched entry for 0.29.INTA (src \\_SB_.LNKA:0) pcib0: slot 29 INTA routed to irq 11 via \\_SB_.LNKA found-> vendor=3D0x8086, dev=3D0x24c2, revid=3D0x01 bus=3D0, slot=3D29, func=3D0 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 map[20]: type 4, range 32, base 00001840, size 5, enabled pcib0: matched entry for 0.29.INTB (src \\_SB_.LNKD:0) pcib0: slot 29 INTB routed to irq 11 via \\_SB_.LNKD found-> vendor=3D0x8086, dev=3D0x24c4, revid=3D0x01 bus=3D0, slot=3D29, func=3D1 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 map[20]: type 4, range 32, base 00001860, size 5, enabled pcib0: matched entry for 0.29.INTC (src \\_SB_.LNKC:0) pcib0: slot 29 INTC routed to irq 11 via \\_SB_.LNKC found-> vendor=3D0x8086, dev=3D0x24c7, revid=3D0x01 bus=3D0, slot=3D29, func=3D2 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0001, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D11 map[10]: type 1, range 32, base d0100000, size 10, enabled pcib0: matched entry for 0.29.INTD (src \\_SB_.LNKH:0) pcib0: slot 29 INTD routed to irq 11 via \\_SB_.LNKH found-> vendor=3D0x8086, dev=3D0x24cd, revid=3D0x01 bus=3D0, slot=3D29, func=3D7 class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0106, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dd, irq=3D11 powerspec 2 supports D0 D3 current D0 found-> vendor=3D0x8086, dev=3D0x2448, revid=3D0x81 bus=3D0, slot=3D30, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x8080, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x24cc, revid=3D0x01 bus=3D0, slot=3D31, func=3D0 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x000f, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) map[20]: type 4, range 32, base 00001810, size 4, enabled found-> vendor=3D0x8086, dev=3D0x24ca, revid=3D0x01 bus=3D0, slot=3D31, func=3D1 class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D255 map[20]: type 4, range 32, base 00001880, size 5, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB:0) pcib0: slot 31 INTB routed to irq 11 via \\_SB_.LNKB found-> vendor=3D0x8086, dev=3D0x24c3, revid=3D0x01 bus=3D0, slot=3D31, func=3D3 class=3D0c-05-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0001, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 map[10]: type 4, range 32, base 00001c00, size 8, enabled map[14]: type 4, range 32, base 000018c0, size 6, enabled map[18]: type 1, range 32, base d0100c00, size 9, enabled map[1c]: type 1, range 32, base d0100800, size 8, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB:0) pcib0: slot 31 INTB routed to irq 11 via \\_SB_.LNKB found-> vendor=3D0x8086, dev=3D0x24c5, revid=3D0x01 bus=3D0, slot=3D31, func=3D5 class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00002400, size 8, enabled map[14]: type 4, range 32, base 00002000, size 7, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB:0) pcib0: slot 31 INTB routed to irq 11 via \\_SB_.LNKB found-> vendor=3D0x8086, dev=3D0x24c6, revid=3D0x01 bus=3D0, slot=3D31, func=3D6 class=3D07-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 powerspec 2 supports D0 D3 current D0 pci0: <base peripheral> at device 0.1 (no driver attached) pci0: <base peripheral> at device 0.3 (no driver attached) agp0: <Intel 82855GME (855GME GMCH) SVGA controller> port 0x1800-0x1807= mem 0xd0000000-0xd007ffff,0xe0000000-0xe7ffffff irq 11 at device 2.0 o= n pci0 agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xe0000000 agp0: Reserved 0x80000 bytes for rid 0x14 type 3 at 0xd0000000 agp0: detected 8060k stolen memory agp0: aperture size is 128M pci0: <display> at device 2.1 (no driver attached) uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1820-0x183f i= rq 11 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820 uhci0: [GIANT-LOCKED] usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1840-0x185f i= rq 11 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840 uhci1: [GIANT-LOCKED] usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1860-0x187f i= rq 11 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860 uhci2: [GIANT-LOCKED] usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd0100000-0xd01003ff ir= q 11 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd0100000 ehci0: [GIANT-LOCKED] ehci_pci_attach: companion usb0 ehci_pci_attach: companion usb1 ehci_pci_attach: companion usb2 usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <EHCI (generic) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: single transaction translator uhub3: 6 ports with 6 removable, self powered pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib1: secondary bus 2 pcib1: subordinate bus 5 pcib1: I/O decode 0x3000-0x7fff pcib1: memory decode 0xd0200000-0xdfffffff pcib1: prefetched decode 0xf0000000-0xf7ffffff pcib1: Subtractively decoded bridge. ACPI: Found matching pin for 0.2.INTA at func 0: 11 pci2: <ACPI PCI bus> on pcib1 pci2: physical bus=3D2 map[10]: type 1, range 32, base b0000000, size 12, enabled pcib1: device (null) requested decoded memory range 0xb0000000-0xb0000f= ff pcib1: matched entry for 2.0.INTA (src \\_SB_.LNKA:0) pcib1: slot 0 INTA routed to irq 11 via \\_SB_.LNKA found-> vendor=3D0x1180, dev=3D0x0476, revid=3D0x8d bus=3D2, slot=3D0, func=3D0 class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1 cmdreg=3D0x0107, statreg=3D0x0210, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x80 (32000 ns), maxlat=3D0x07 (17= 50 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base d0210000, size 8, enabled pcib1: device (null) requested decoded memory range 0xd0210000-0xd02100= ff pcib1: matched entry for 2.0.INTB (src \\_SB_.LNKB:0) pcib1: slot 0 INTB routed to irq 11 via \\_SB_.LNKB found-> vendor=3D0x1180, dev=3D0x0822, revid=3D0x13 bus=3D2, slot=3D0, func=3D1 class=3D08-05-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0106, statreg=3D0x0210, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base d0220000, size 17, enabled pcib1: device (null) requested decoded memory range 0xd0220000-0xd023ff= ff map[18]: type 4, range 32, base 00007000, size 6, enabled pcib1: device (null) requested decoded I/O range 0x7000-0x703f pcib1: matched entry for 2.1.INTA (src \\_SB_.LNKE:0) pcib1: slot 1 INTA routed to irq 11 via \\_SB_.LNKE found-> vendor=3D0x8086, dev=3D0x1077, revid=3D0x00 bus=3D2, slot=3D1, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0117, statreg=3D0x0230, cachelnsz=3D8 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0xff (63750 ns), maxlat=3D0x00 (0 = ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base d0200000, size 16, enabled pcib1: device (null) requested decoded memory range 0xd0200000-0xd020ff= ff pcib1: matched entry for 2.2.INTA (src \\_SB_.LNKF:0) pcib1: slot 2 INTA routed to irq 11 via \\_SB_.LNKF found-> vendor=3D0x168c, dev=3D0x1014, revid=3D0x01 bus=3D2, slot=3D2, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0116, statreg=3D0x0290, cachelnsz=3D8 (dwords) lattimer=3D0x50 (2400 ns), mingnt=3D0x0a (2500 ns), maxlat=3D0x1c (700= 0 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D3 current D0 cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xb0000000-0xb0000fff irq 11 at = device 0.0 on pci2 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb0000000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0x04761180 0x02100107 0x0607008d 0x00824000 = 0x10: 0xb0000000 0x020000dc 0xb0050302 0xfffff000 = 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc = 0x30: 0x00000000 0xfffffffc 0x00000000 0x0700010b = 0x40: 0x05551014 0x00000001 0x00000000 0x00000000 = 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 = 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 = 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 = 0x80: 0x04800001 0x00000000 0x04630464 0x00000001 = 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 = 0xa0: 0x008a0000 0x00000000 0x00f00000 0x00000000 = 0xb0: 0x00000000 0x36000000 0x00003800 0x00000000 = 0xc0: 0x05551014 0x00000000 0x00000000 0x00000000 = 0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 = 0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 = 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 = pci2: <base peripheral> at device 0.1 (no driver attached) em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0x70= 00-0x703f mem 0xd0220000-0xd023ffff irq 11 at device 1.0 on pci2 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xd0220000 em0: Reserved 0x40 bytes for rid 0x18 type 4 at 0x7000 em0: [MPSAFE] em0: bpf attached em0: Ethernet address: 00:0a:e4:2b:bc:9f em0: Speed:N/A Duplex:N/A ath0: <Atheros 5212> mem 0xd0200000-0xd020ffff irq 11 at device 2.0 on = pci2 ath0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xd0200000 ath0: [MPSAFE] ath0: bad hal channel 858993443 (4920/340) ignored ath0: bad hal channel 858993447 (4940/340) ignored ath0: bad hal channel 858993451 (4960/340) ignored ath0: bad hal channel 858993455 (4980/340) ignored ath0: bpf attached ath0: Ethernet address: 00:0e:9b:6e:80:97 ath0: bpf attached ath0: bpf attached ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 2= 4Mbps 36Mbps 48Mbps 54Mbps ath0: mac 5.9 phy 4.3 radio 3.6 ath0: Use hw queue 1 for WME_AC_BE traffic ath0: Use hw queue 0 for WME_AC_BK traffic ath0: Use hw queue 2 for WME_AC_VI traffic ath0: Use hw queue 3 for WME_AC_VO traffic ath0: Use hw queue 8 for CAB traffic ath0: Use hw queue 9 for beacons isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1810-0x181f,0x376,0x170= -0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1810 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00 ata0: stat0=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata0: stat1=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata0: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x1<ATA_MASTER> ata0: [MPSAFE] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=3D00 ostat0=3Dff ostat1=3Dff ata1: [MPSAFE] ichsmb0: <Intel 82801DC (ICH4) SMBus controller> port 0x1880-0x189f irq= 11 at device 31.3 on pci0 ichsmb0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1880 ichsmb0: [GIANT-LOCKED] smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus generic I/O> on smbus0 pcm0: <Intel ICH4 (82801DB)> port 0x18c0-0x18ff,0x1c00-0x1cff mem 0xd01= 00800-0xd01008ff,0xd0100c00-0xd0100dff irq 11 at device 31.5 on pci0 pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1c00 pcm0: Reserved 0x40 bytes for rid 0x14 type 4 at 0x18c0 pcm0: [GIANT-LOCKED] pcm0: <Analog Devices AD1981B AC97 Codec (id =3D 0x41445374)> pcm0: Codec features headphone, 20 bit DAC, 5 bit master volume, no 3D = Stereo Enhancement pcm0: Primary codec extended features variable rate PCM, AMAP, reserved= 4 pcm0: sndbuf_setmap 1eb88000, 4000; 0xdcfd6000 -> 1eb88000 pcm0: sndbuf_setmap 1eb84000, 4000; 0xdcfda000 -> 1eb84000 pci0: <simple comms> at device 31.6 (no driver attached) pci0:31:6: Transition from D0 to D3 acpi_tz0: <Thermal Zone> on acpi0 speaker0: <PC speaker> port 0x61 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x54ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> flags 0x2000 irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00002000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_ibm0: <IBM ThinkPad Button> on acpi0 acpi_ibm0: Version 100 acpi_ibm0: Available Mask 9dc acpi_ibm0: Initial Mask 80c pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xdc000-0xdffff,0xcd800-0xce7ff,0xcc80= 0-0xcd7ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on is= a0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) ppc0 failed to probe at irq 7 on isa0 sio0 failed to probe at port 0x3f8 irq 4 on isa0 sio1 failed to probe at port 0x2f8 irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. Timecounter "TSC" frequency 1395476624 Hz quality 800 Timecounters tick every 1.000 msec Linux ELF exec handler installed lo0: bpf attached ipfw2 initialized, divert loadable, rule-based forwarding disabled, def= ault to deny, logging unlimited ata0-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA100 cable=3D80 wire cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%= acpi_cmbat0: battery initialization start acpi_cmbat0: battery initialization done, tried 1 times acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times ad0: setting PIO4 on Intel ICH4 chip ad0: setting UDMA100 on Intel ICH4 chip ad0: 38154MB <HITACHI DK13FA-40B 00MCA0B4> at ata0-master UDMA100 ad0: 78140160 sectors [77520C/16H/63S] 16 sectors/interrupt 1 depth que= ue pcm0: measured ac97 link rate at 48009 Hz, will use 48000 Hz GEOM: new disk ad0 Trying to mount root from ufs:/dev/ad0s2a start_init: trying /sbin/init em0: Link is up 100 Mbps Full Duplex nfslock: pseudo-device splash: image decoder found: daemon_saver
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050206.214325.85708834.rushani>