Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 24 Sep 2004 12:52:49 +0930 (CST)
From:      "matt baker" <matt@sevenone.com>
To:        freebsd-hardware@freebsd.org
Subject:   FreeBSD SysKonnect driver
Message-ID:  <44063.143.216.237.212.1095996169.squirrel@143.216.237.212>

next in thread | raw e-mail | index | archive | help
Hello,

I'm not sure if anyone will be able to help me, but i'm having a problem
with the SysKonnect FreeBSD driver.

I have a SK-9844 card which i'm trying to get running.

Originally the system was running 5.2.1, and I tried using the sk driver,
however got the error about no phy found.  I then used the syskonnect yk
driver and this worked fine.
However I now need to run RELENG_5 due to issues I have with my raid card,
and find that the syskonnect yk driver no longer works, so i'm exploring
using the sk driver again (would also be nice to have both gig ports
available too).
With a recent cvs copy of the os i'm seeing the same issue with no phy found.

some specs:
if_sk.c    1.86
if_skreg.h 1.22
xmaciireg.h 1.3

card with yk driver on 5.2.1:
yk0: <SysKonnect SK-9844 Gigabit Ethernet Adapter, Ver. 6.05 > port
0x9000-0x90ff mem 0xeb100000-0xeb103fff irq 10 at device 8.0 on pci0



card with sk driver:
skc0: <SysKonnect Gigabit Ethernet (V1.0)> port 0x9000-0x90ff mem
0xeb100000-0xeb103fff irq 10 at device 8.0 on pci0
kernel: skc0: SysKonnect SK-NET Gigabit Ethernet Adapter SK-9844 SX dual
link kernel: sk0: <XaQti Corp. XMAC II> on skc0
kernel: sk0: Ethernet address: 00:00:5a:9a:84:c8
kernel: skc0: no PHY found!
kernel: device_attach: sk0 attach returned 6
kernel: sk1: <XaQti Corp. XMAC II> on skc0
kernel: sk1: Ethernet address: 00:00:5a:9a:84:c9
kernel: skc1: no PHY found!
kernel: device_attach: sk1 attach returned 6



Thankyou for any suggestion on how to get this to work.


Regards,

Matt Baker








Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?44063.143.216.237.212.1095996169.squirrel>