Date: Tue, 3 Aug 1999 15:27:35 +0200 (CEST) To: freebsd-hardware@FreeBSD.ORG, hackers@FreeBSD.ORG, freebsd-questions@FreeBSD.ORG Subject: Overloading my machine?
| raw e-mail | index | archive | help
Hi there,
I want to put on my machine the following HW (I'll be running
FBSD-3.2) beside the usual HW (serial and parallel ports etc.):
- three IDE disks
- floppy
- IDE CD-ROM
- three ep NIC
- Adaptec PCI bus SCSI adapter
Now, this is not a lot of burden (I think) for the processor, but I'm
a bit afraid about the architecture. Will this work? In particular,
I'm worried about the interrupts. Any suggestions how to configure
them?
Thanx in advance for your assistance!
LPA
PS: Here is dmesg for the current FBSD which doesn't have SCSI adapter
installed.
----------------------------------------------------------------------
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 2.2.8-STABLE #0: Wed Jan 20 13:08:03 MET 1999
root@Irena.IskraSistemi.Si:/usr/ports/FreeBSD-src/sys/compile/IRENA
CPU: Pentium/P54C (166.19-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping=12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 134217728 (131072K bytes)
avail memory = 129335296 (126304K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82439> rev 3 on pci0:0:0
chip1 <Intel 82371SB PCI-ISA bridge> rev 1 on pci0:7:0
chip2 <Intel 82371SB IDE interface> rev 0 on pci0:7:1
pci0:7:2: Intel Corporation, device=0x7020, class=serial, subclass=0x03 int d irq 11 [no driver assigned]
vga0 <VGA-compatible display device> rev 64 on pci0:19:0
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <4 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <WDC AC22100H>
wd0: 2014MB (4124736 sectors), 4092 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (wd2): <WDC AC22100H>
wd2: 2014MB (4124736 sectors), 4092 cyls, 16 heads, 63 S/T, 512 B/S
wdc1: unit 1 (wd3): <FUJITSU MPA3026ATU>
wd3: 2503MB (5126688 sectors), 5086 cyls, 16 heads, 63 S/T, 512 B/S
3 3C5x9 board(s) on ISA found at 0x300 0x260 0x280
ep0 at 0x300-0x30f irq 10 on isa
ep0: aui/utp/bnc[*BNC*] address 00:60:97:3a:73:bf
ep1 at 0x280-0x28f irq 5 on isa
ep1: aui/utp/bnc[*BNC*] address 00:a0:24:dd:96:fe
ep2 at 0x260-0x26f irq 11 on isa
ep2: utp[*UTP*] address 00:60:97:4e:e5:93
npx0 on motherboard
npx0: INT 16 interface
Intel Pentium detected, installing workaround for F00F bug
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?>