Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 10 Feb 2017 16:10:41 +0200
From:      Konstantin Belousov <kostikbel@gmail.com>
To:        David Wolfskill <david@catwhisker.org>
Cc:        Iblis Lin <iblis@hs.ntnu.edu.tw>, current@freebsd.org
Subject:   Re: dhclient fails: can't open and lock /var/db/dhclient.leases.wlan0: Bad file descriptor
Message-ID:  <20170210141041.GR2092@kib.kiev.ua>
In-Reply-To: <20170210132954.GE1523@albert.catwhisker.org>
References:  <20170210132954.GE1523@albert.catwhisker.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Feb 10, 2017 at 05:29:54AM -0800, David Wolfskill wrote:
> This was head @r313544; previous successful build/smoke test was
> @r313467 (yesterday).
> 
> Here's an excerpt from a typescript I made of some "poking around";
> subsequent to that, I was able to set the IP address, netmask, and
> broadcast address on the NIC (wlano), then set the default route, and
> once that was done, I was able to use the network:
> 
> wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>         ether 00:24:d6:7a:03:ce
>         inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255 
>         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>         media: IEEE 802.11 Wireless Ethernet MCS mode 11ng
>         status: associated
>         ssid lmdhw-net channel 1 (2412 MHz 11g ht/20) bssid 04:18:d6:22:22:1f
>         regdomain FCC country US authmode WPA2/802.11i privacy ON
>         deftxkey UNDEF AES-CCM 2:128-bit txpower 30 bmiss 10 scanvalid 60
>         protmode CTS ampdulimit 64k ampdudensity 8 -amsdutx amsdurx shortgi
>         -stbc -ldpc wme roaming MANUAL
>         groups: wlan 
> (12.0-C)[4] pgrep dhclient
> (12.0-C)[5] dhclient wlan0
> dhclient: /etc/dhclient-enter-hooks invoked with reason PREINIT
> dhclient: Leaving hostname set to 
> dhclient: /etc/dhclient-exit-hooks invoked with reason PREINIT
> dhclient: reason was PREINIT; no action taken
> dhclient: Exiting /etc/dhclient-exit-hooks (PREINIT) with exit_status 0
> can't open and lock /var/db/dhclient.leases.wlan0: Bad file descriptor
> exiting.
> (12.0-C)[6] ls -lTio /var/db/dhclient.leases*
> 883105 ----------  1 root  wheel  - 4017 Jan  4 09:18:10 2017 /var/db/dhclient.leases.em0
> 883280 ----------  1 root  wheel  -  856 Aug 11 04:52:54 2015 /var/db/dhclient.leases.lagg0
> 883344 ----------  1 root  wheel  - 3333 Jan 20 21:19:10 2015 /var/db/dhclient.leases.vboxnet0
> 883108 ----------  1 root  wheel  - 1993 Feb 10 04:30:13 2017 /var/db/dhclient.leases.wlan0
> 883079 ----------  1 root  wheel  - 2013 Jan 19 11:52:07 2017 /var/db/dhclient.leases.wlan1
> 
> 
> Moving /var/db/dhclient.leases.wlan0 aside did not change the behavior.
> 
> Stable/11 shows the iwn(4) device as:
> g1-252(11.0-S)[4] pciconf -lv | grep -A 3 iwn
> iwn0@pci0:3:0:0:        class=0x028000 card=0x13218086 chip=0x42328086 rev=0x00 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'WiFi Link 5100'
>     class      = network
> g1-252(11.0-S)[5] 
> 
> File system for /var is a fairly vanilla UFS2+SU.  I suppose I could have
> tried ktrace (had I thought of it before switching back to the stable/11
> slice).
> 

Please try this.

diff --git a/sys/kern/vfs_vnops.c b/sys/kern/vfs_vnops.c
index 70cdcdc6f75..1f2cceaf7a6 100644
--- a/sys/kern/vfs_vnops.c
+++ b/sys/kern/vfs_vnops.c
@@ -351,8 +351,8 @@ vn_open_vnode(struct vnode *vp, int fmode, struct ucred *cred,
 
 	while ((fmode & (O_EXLOCK | O_SHLOCK)) != 0) {
 		KASSERT(fp != NULL, ("open with flock requires fp"));
-		if (fp->f_type != DTYPE_VNODE) {
-			error = EBADF;
+		if (fp->f_type != DTYPE_NONE && fp->f_type != DTYPE_VNODE) {
+			error = EOPNOTSUPP;
 			break;
 		}
 		lock_flags = VOP_ISLOCKED(vp);
diff --git a/sys/sys/file.h b/sys/sys/file.h
index 353c92f365a..c51f26a41d2 100644
--- a/sys/sys/file.h
+++ b/sys/sys/file.h
@@ -53,6 +53,7 @@ struct vnode;
 
 #endif /* _KERNEL */
 
+#define	DTYPE_NONE	0	/* not yet initialized */
 #define	DTYPE_VNODE	1	/* file */
 #define	DTYPE_SOCKET	2	/* communications endpoint */
 #define	DTYPE_PIPE	3	/* pipe */



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20170210141041.GR2092>