Skip site navigation (1)Skip section navigation (2)
Date:      12 Feb 2001 14:43:43 -0000
From:      freebsd-stable-local@insignia.com
To:        freebsd-stable@insignia.com
Subject:   Athlon TB 700 w. Asus K7M vs. FreeBSD (2nd try)
Message-ID:  <3A87F5C8.D99B1787@inode.at>

next in thread | raw e-mail | index | archive | help
Hi,


The problems with my Athlon Thunderbird 700 on an Asus K7M Motherboard
(Bios 1009) and FreeBSD 4.2 still exists. I didn't get a solution from
the FreeBSD-community to solve this problems.
Now I installed RedHat 7.0 Linux an it works. I think there is a bug in
the FreeBSD-kernel, witch slows down my system, because three other OS's
work without Problems (Linux, W98, Win2k).

Here's the problem-description again:

The system is very very slow, like on an old 386. Keyboard clicks are
delayed, its like I work over a slow network. I have this problems since
I updatet from an Athlon 500 to an Athlon Thunderbird 700.
I use already the latest BIOS from Asus.

dmesg:
     kernel output:
      Copyright (c) 1992-2000 The FreeBSD Project.
      Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992,
1993,
     1994

       The Regents of the University of California. All rights reserved.

      FreeBSD 4.2-RELEASE #1: Sat Dec  2 21:47:42 CET 2000
          root@worf.jawa.at:/usr/src/sys/compile/WORF
      Timecounter "i8254"  frequency 1193182 Hz
      CPU: AMD Athlon(tm) Processor (704.94-MHz 686-class CPU)
        Origin = "AuthenticAMD"  Id = 0x642  Stepping = 2


Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>



        AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
      real memory  = 134152192 (131008K bytes)
      config> q
      avail memory = 127262720 (124280K bytes)
      Preloaded elf kernel "kernel" at 0xc0354000.
      Preloaded userconfig_script "/boot/kernel.conf" at 0xc035409c.
      Pentium Pro MTRR support enabled
      npx0: <math processor> on motherboard
      npx0: INT 16 interface
      pcib0: <AMD-751 host to PCI bridge> on motherboard
      pci0: <PCI bus> on pcib0
      pcib1: <AMD-751 PCI-PCI (AGP) bridge> at device 1.0 on pci0
      pci1: <PCI bus> on pcib1
      pci1: <NVidia Riva Ultra Vanta TNT2 graphics accelerator> at 5.0
irq 11

      isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0
      isa0: <ISA bus> on isab0
      atapci0: <VIA 82C686 ATA66 controller> port 0xffa0-0xffaf at
device 4.1

      on pci0
      ata0: at 0x1f0 irq 14 on atapci0
      ata1: at 0x170 irq 15 on atapci0
      pci0: <VIA 83C572 USB controller> at 4.2 irq 9
      chip1: <VIA 82C686 ACPI interface> at device 4.4 on pci0
      pcm0: <VIA VT82C686A AC'97 Audio> port 0xd000-0xd003,0xd400-0xd4ff
irq
      10 at device 4.5 on pci0
      bktr0: <BrookTree 878> mem 0xeddfd000-0xeddfdfff irq 5 at device
14.0
     on
      pci0
      iicbb0: <I2C generic bit-banging driver> on bti2c0
      iicbus0: <Philips I2C bus> on iicbb0 master-only
      smbus0: <System Management Bus> on bti2c0
      bktr0: Card has no configuration EEPROM. Cannot determine card
make.
      bktr0: Pinnacle/Miro TV, Temic NTSC tuner.
      pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 14.1 irq 5
      sym0: <810a> port 0xd800-0xd8ff mem 0xefffff00-0xefffffff irq 10
at
      device 15.0 on pci0
      sym0: Symbios NVRAM, ID 7, Fast-10, SE, parity checking
      sym0: open drain IRQ line driver
      sym0: using LOAD/STORE-based firmware.
      de0: <Digital 21041 Ethernet> port 0xc800-0xc87f mem
      0xeffffe80-0xeffffeff irq 9 at device 16.0 on pci0
      de0: SMC 21041 [10Mb/s] pass 1.1
      de0: address 00:00:c0:99:b5:bf
      fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2
on
      isa0
      fdc0: FIFO enabled, 8 bytes threshold
      fd0: <1440-KB 3.5" drive> on fdc0 drive 0
      atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
      atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
      kbd0 at atkbd0
      psm0: <PS/2 Mouse> irq 12 on atkbdc0
      psm0: model Generic PS/2 mouse, device ID 0
      vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff
on
      isa0
      sc0: <System console> at flags 0x100 on isa0
      sc0: VGA <16 virtual consoles, flags=0x300>
      sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
      sio0: type 16550A
      sio1: configured irq 3 not in bitmap of probed irqs 0
      ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
      ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
      ppc0: FIFO with 16/16/8 bytes threshold
      ppbus0: IEEE1284 device found /NIBBLE/PS2/ECP
      Probing for PnP devices on ppbus0:
      ppbus0: <HEWLETT-PACKARD DESKJET 890C> PCL,MLC,PML
      lpt0: <Printer> on ppbus0
      lpt0: Interrupt-driven port
      plip0: <PLIP network interface> on ppbus0
      ppi0: <Parallel I/O> on ppbus0
      joy0 at port 0x201 on isa0
      de0: enabling 10baseT port
      ad0: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata0-master UDMA66

      ad2: 9641MB <IBM-DTTA-371010> [19590/16/63] at ata1-master UDMA33
      ad3: 6197MB <IBM-DHEA-36481> [12592/16/63] at ata1-slave UDMA33
      Waiting 5 seconds for SCSI devices to settle
      (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
      (probe5:sym0:0:5:0): phase change 6-7 6@07e2ef8c resid=4.
      Mounting root from ufs:/dev/ad0s3a
      cd0 at sym0 bus 0 target 4 lun 0
      cd0: <PLEXTOR CD-R   PX-W8220T 1.01> Removable CD-ROM SCSI-2
device
      cd0: 10.000MB/s transfers (10.000MHz, offset 8)
      cd0: Attempt to query device size failed: NOT READY, Medium not
present

      - tray closed
      da0 at sym0 bus 0 target 5 lun 0
      da0: <IOMEGA ZIP 100 D.09> Removable Direct Access SCSI-2 device
      da0: 3.300MB/s transfers
      da0: Attempt to query device size failed: NOT READY, Medium not
present

      uhci0: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 9 at
device
      4.2 on pci0
      usb0: <VIA 83C572 USB controller> on uhci0
      usb0: USB revision 1.0
      uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
      uhub0: 2 ports with 2 removable, self powered

bye,
--
--------------------------------------
E-mail: Michael.Bretterklieber@jawa.at
----------------------------
JAWA MANAGEMENT und SOFTWARE
Liebenauer Hauptstr. 200
A-8041 GRAZ
Tel: ++43-(0)316-403274-12
Fax: ++43-(0)316-403274-10
GSM: ++43-(0)676-93 96 698
homepage: http://www.jawa.at
--------- privat -----------
E-mail:   mbretter@inode.at
homepage: http://www.inode.at/mbretter
--------------------------------------




To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3A87F5C8.D99B1787>