Date: Wed, 16 Apr 2008 13:06:42 +0700 From: "Outback Dingo" <outbackdingo@gmail.com> To: "Simon Barner" <barner@freebsd.org> Cc: vova@fbsd.ru, ports@freebsd.org, mobile@freebsd.org Subject: Re: fprint (finger print sensor framework) port ready for testing Message-ID: <5635aa0d0804152306s170586c3ia4410cb766a2f196@mail.gmail.com> In-Reply-To: <20080415194347.GB1956@dose.local.invalid> References: <20080414180740.GA1050@dose.local.invalid> <1208256383.1513.6.camel@localhost> <5635aa0d0804150751n3f89e885mdac8fb3077cdc331@mail.gmail.com> <20080415194347.GB1956@dose.local.invalid>
next in thread | previous in thread | raw e-mail | index | archive | help
Yupp I even set the permissions 777 and added the user i tested to group operator.... still no joy ive used the upek port no problems even with GDM. the "root" user works great, but regular users cant even register ls -al /dev/ugen* crw-rw-rw- 1 root operator 0, 84 Apr 15 14:14 /dev/ugen0 crw-rw-rw- 1 root operator 0, 85 Apr 15 14:14 /dev/ugen0.1 crw-rw-rw- 1 root operator 0, 86 Apr 15 14:14 /dev/ugen0.2 crw-rw-rw- 1 root operator 0, 87 Apr 15 14:14 /dev/ugen0.3 crw-rw-rw- 1 root operator 0, 88 Apr 15 14:14 /dev/ugen0.4 crwxrwxrwx 1 root operator 0, 89 Apr 15 14:14 /dev/ugen1 crwxrwxrwx 1 root operator 0, 90 Apr 15 14:14 /dev/ugen1.1 crwxrwxrwx 1 root operator 0, 91 Apr 16 01:34 /dev/ugen1.2 crwxrwxrwx 1 root operator 0, 92 Apr 15 14:14 /dev/ugen1.3 usbdevs -vd Controller /dev/usb0: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 uhub0 port 1 powered port 2 addr 2: low speed, power 98 mA, config 1, USB Receiver(0xc521), Logitech(0x046d), rev 57.00 ums0 uhid0 Controller /dev/usb1: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 uhub1 port 1 powered port 2 powered Controller /dev/usb2: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 uhub2 port 1 addr 2: full speed, self powered, config 1, BCM2045B(0x2110), Broadcom Corp(0x0a5c), rev 1.00 ugen0 port 2 addr 3: full speed, power 100 mA, config 1, Biometric Coprocessor(0x2016), STMicroelectronics(0x0483), rev 0.01 ugen1 Controller /dev/usb3: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 uhub3 port 1 powered port 2 powered Controller /dev/usb4: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x0000), rev 1.00 uhub4 port 1 powered port 2 powered port 3 powered port 4 powered port 5 powered port 6 powered port 7 powered port 8 powered On Wed, Apr 16, 2008 at 2:43 AM, Simon Barner <barner@freebsd.org> wrote: > Outback Dingo wrote: > > pam_fprint works (see below) but when i try to run the fprint demo i ge= t > > > > STATUS: No Devices Found > > Are you sure you have r/w access to the sensor's USB device? > > > > pam_fprint_enroll -f 7 > > This program will enroll your finger, unconditionally overwriting any > selected > > print that was enrolled previously. If you want to continue, press > enter, > > otherwise hit Ctrl+C > > > > Found device claimed by UPEK TouchStrip driver > > Opened device. It's now time to enroll your finger. > > > > You will need to successfully scan your Right Index Finger 3 times to > complete > > the process. > > > > Scan your finger now. > > upekts:error [read_msg] non-zero bytes in cmd response > > upekts:error [read_msg28] expected response, got -1 seq=3D40 > > Something seems to go wrong. I have never seenn this error message. > > Which sensor are you using? Can you send me the output of `usbdevs -vd' > in a private mail please? > > -- > Best regards / Viele Gr=FC=DFe, barner@FreeBS= D.org > Simon Barner barner@gmx.d= e >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5635aa0d0804152306s170586c3ia4410cb766a2f196>