Date: Wed, 20 Mar 1996 14:47:58 -0500 (EST) From: "Marc G. Fournier" <scrappy@ki.net> To: stable@freebsd.org Subject: memory problems under -stable Message-ID: <Pine.BSF.3.91.960320144503.3864A-100000@ki.net>
next in thread | raw e-mail | index | archive | help
Hi...
I'm semi-regularly getting the following with -stable:
===> socksys
cc -O2 -m486 -DLKM -I. -DCOMPAT_IBCS2 -DKERNEL -I/usr/src/lkm/socksys/../../sys -W -Wcomment -Wredundant-decls -c /usr/src/lkm/socksys/socksys.c
cc -O2 -m486 -DLKM -I. -DCOMPAT_IBCS2 -DKERNEL -I/usr/src/lkm/socksys/../../sys -W -Wcomment -Wredundant-decls -c /usr/src/lkm/socksys/../../sys/i386/ibcs2/ibcs2_socksys.c
ld -r -o socksys_mod.o socksys.o ibcs2_socksys.o
===> syscons
Memory fault - core dumped
*** Error code 139
Stop.
ki# make
Segmentation fault (core dumped)
ki# pstat -s
Device 1K-blocks Used Avail Capacity Type
/dev/sd0b 102400 10052 92284 10% Interleaved
/dev/sd1b 32768 9668 23036 30% Interleaved
/dev/sd2b 32768 9744 22960 30% Interleaved
/dev/sd3b 32768 9976 22728 31% Interleaved
Total 200448 39440 161008 20%
If I wait a couple of minutes, and then run make again, all is
well and I can continue rebuilding the system...
...anyone else experiencing this with -stable? The system looks
like this, according to dmesg:
FreeBSD 2.1-STABLE #4: Sat Mar 16 17:16:06 EST 1996
scrappy@ki.net:/usr/src/sys/compile/kinet
CPU: i486 DX4 (486-class CPU)
Origin = "GenuineIntel" Id = 0x480 Stepping=0
Features=0x3<FPU,VME>
real memory = 16777216 (16384K bytes)
avail memory = 14704640 (14360K bytes)
Probing for devices on PCI bus 0:
chip0 <SiS 85c496> rev 49 on pci0:5
ncr0 <ncr 53c810 scsi> rev 2 int a irq 12 on pci0:11
ncr0 waiting for scsi devices to settle
(ncr0:0:0): "CONNER CFP1060S 1.05GB 243F" type 0 fixed SCSI 2
sd0(ncr0:0:0): Direct-Access
sd0(ncr0:0:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8.
1013MB (2074880 512 byte sectors)
(ncr0:1:0): "QUANTUM LPS340S 020B" type 0 fixed SCSI 2
sd1(ncr0:1:0): Direct-Access
sd1(ncr0:1:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8.
327MB (670506 512 byte sectors)
(ncr0:2:0): "QUANTUM LP240S GM240S01X 4.6" type 0 fixed SCSI 2
sd2(ncr0:2:0): Direct-Access
sd2(ncr0:2:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8.
234MB (479350 512 byte sectors)
(ncr0:3:0): "CONNER CFA540S 13B0" type 0 fixed SCSI 2
sd3(ncr0:3:0): Direct-Access
sd3(ncr0:3:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8.
515MB (1056708 512 byte sectors)
vga0 <VGA-compatible display device> rev 0 on pci0:15
Probing for devices on the ISA bus:
ed0 at 0x280-0x29f irq 5 maddr 0xd8000 msize 16384 on isa
ed0: address 00:00:c0:86:44:79, type WD8013EPC (16 bit)
vt0 at 0x60-0x6f irq 1 on motherboard
vt0: generic, 80 col, color, 8 scr, mf2-kbd, [R3.20-b24]
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
aha0 not found at 0x330
npx0 on motherboard
npx0: INT 16 interface
pid 3983 (make), uid 0: exited on signal 11
pid 3985 (make), uid 0: exited on signal 11
Marc G. Fournier | POP Mail Telnet Acct DNS Hosting
System | WWW Services Database Services | Knowledge,
Administrator | | Information and
scrappy@ki.net | WWW: http://www.ki.net | Communications, Inc
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.91.960320144503.3864A-100000>