Date: Wed, 20 Jun 2012 17:14:45 +0200 From: Ruben de Groot <mail25@bzerk.org> To: stable@freebsd.org Subject: kern.geom.part.check_integrity=0 not working. not able to boot 9-STABLE Message-ID: <730E36C6-E2A7-4C62-B988-25D66CDFE292@bzerk.org>
next in thread | raw e-mail | index | archive | help
I'm resending this email as I got no response the first time. After over 3 years of uptime, I decided to upgrade one of my SUN boxes = to 9-stable. However the new kernel didn't boot because of geom = integrity check issues. This I understand as I remember I had to use = some weird tricks in the past to get the entire disks used in the first = place.=20 Anyway, I felt lucky this was a known and documented problem, with a = workaround: http://www.freebsd.org/releases/9.0R/relnotes-detailed.html#AEN1277 However, the workaround doesn't seem to work :-( Type '?' for a list of commands, 'help' for more detailed help. OK set kern.geom.part.check_integrity=3D"0" OK boot jumping to kernel entry at 0xc0070000. Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-STABLE #5: Thu Jun 14 19:24:33 UTC 2012 <SNIP> Timecounters tick every 1.000 msec ada0 at ata2 bus 0 scbus0 target 0 lun 0 ada0: <MAXTOR STM3160215A 3.AAD> ATA-7 device ada0: 66.700MB/s transfers (UDMA4, PIO 8192bytes) ada0: 152627MB (312581808 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad0 ada1 at ata3 bus 0 scbus1 target 0 lun 0 ada1: <MAXTOR STM3160215A 3.AAD> ATA-7 device ada1: 66.700MB/s transfers (UDMA4, PIO 8192bytes) ada1: 152627MB (312581808 512 byte sectors: 16H 63S/T 16383C) ada1: Previously was known as ad1 GEOM: ada0: adding VTOC8 information. GEOM_PART: integrity check failed (ada0, VTOC8) this is where it hangs, just like without setting = kern.geom.part.check_integrity. Is this a regression? -- cheers, Ruben de Groot _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to = "freebsd-stable-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?730E36C6-E2A7-4C62-B988-25D66CDFE292>