Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 21 May 2005 10:42:21 -0700 (PDT)
From:      Simeon Nifos <archwndas@yahoo.com>
To:        freebsd-questions@freebsd.org
Subject:   Interrupt storm in Compaq Presario Laptop
Message-ID:  <20050521174221.2903.qmail@web61122.mail.yahoo.com>
In-Reply-To: <20050521120032.C98C216A533@hub.freebsd.org>

next in thread | previous in thread | raw e-mail | index | archive | help
Dear fellows,
I have a Compaq presario 1230 laptop here!

FreeBSD 4.11
------------
Installs fine but: 
a) USB port doesn't work
b) touchpad doesn't work
c) /dev/psm0 cannot be found in /dev

FreeBSD 5.4 and 5.3
-------------------
Installs fine but: 
a) USB port works fine
b) touchpad doesn't work
c) /dev/psm0 cannot be found in /dev
d) time passes too quickly! 1 minute in FreeBSD 5.4
and
   5.3 passes every 10 seconds. 

Below I attached the output of 
ls /dev
more /etc/rc.conf
dmesg

Any ideas how can I fix those problems?
Thanks in advance!

This is my dev directory
------------------------
acd0
acd0t01
ad0
ad0s1
ad0s1a
ad0s1b
ad0s1c
ad0s1d
ad0s1e
ad0s1f
ata
atkbd0
console
consolectl
ctty
cuaa0
cuaia0
cuala0
devctl
devstat
fd
fd0
fido
geom.ctl
io
kbd0
klog
kmem
log
mdctl
mem
net
net1
net2
network
nfs4
null
pci
ptyp0
ptyp1
ptyp2
random
stderr
stdin
stdout
sysmouse
ttyd0
ttyid0
ttyld0
ttyp0
ttyp1
ttyp2
ttyv0
ttyv1
ttyv2
ttyv3
ttyv4
ttyv5
ttyv6
ttyv7
ttyv8
ttyv9
ttyva
ttyvb
ttyvc
ttyvd
ttyve
ttyvf
ums0
urandom
usb
usb0
xpt0
zero

This is my /etc/rc.conf
-----------------------

# -- sysinstall generated deltas -- # Sat May 21
12:34:39 2005
# Created: Sat May 21 12:34:38 2005
# Enable network daemons for user convenience.
# Please make all changes to this file, not to
/etc/defaults/rc.conf.
# This file now contains just the overrides from
/etc/defaults/rc.conf.
defaultrouter="195.251.194.200"
hostname="nevra.materials.uoi.gr"
ifconfig_ed1="inet 195.251.194.137  netmask
255.255.255.128"
linux_enable="YES"
moused_enable="NO"
moused_port="/dev/cuaa3"
moused_type="auto"
sshd_enable="YES"
usbd_enable="YES"


This is my dmesg
----------------
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
1991, 1992, 1993, 1994
	The Regents of the University of California. All
rights reserved.
FreeBSD 5.4-RELEASE #0: Sun May  8 10:21:06 UTC 2005
   
root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Cyrix GXm (24.45-MHz 586-class CPU)
  Origin = "CyrixInstead"  Id = 0x540  DIR=0x3544 
Stepping=3  Revision=5
real memory  = 100663296 (96 MB)
avail memory = 88838144 (84 MB)
pnpbios: Bad PnP BIOS data checksum
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 5 Entries> on
motherboard
pci0: <PCI bus> on pcib0
cbb0: <TI1221 PCI-CardBus Bridge> at device 17.0 on
pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1221 PCI-CardBus Bridge> at device 17.1 on
pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
isab0: <PCI-ISA bridge> port
0x5000-0x500f,0x4000-0x401f,0x3000-0x307f mem
0x40010000-0x40010fff at device 18.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <OHCI (generic) USB controller> mem
0xfedfe000-0xfedfefff irq 9 at device 19.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x0e11) OHCI root hub, class 9/0, rev
1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <display, VGA> at device 20.0 (no driver
attached)
orm0: <ISA Option ROM> at iomem 0xc0000-0xc9fff on
isa0
pmtimer0 on isa0
ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0
ata1 at port 0x376,0x170-0x177 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port
0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5
irq 6 drq 2 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
uhub1: Atmel product 0x3311, class 9/0, rev 1.00/3.00,
addr 2
uhub1: 4 ports with 4 removable, self powered
Timecounter "TSC" frequency 24447264 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 3100MB <FUJITSU MHA2032AT/8211> [6300/16/63] at
ata0-master PIO4
acd0: CDROM <TOSHIBA CD-ROM XM-1702BC/1261> at
ata1-master PIO4
ed1: <PCMCIA Ethernet Card> at port 0x300-0x31f irq 9
function 0 config 32 on pccard0
ed1: Ethernet address: 00:a0:0c:12:74:2e
ed1: if_start running deferred for Giant
ed1: type NE2000 (16 bit) 
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
/usr: mount pending error: blocks 12 files 1
WARNING: /var was not properly dismounted
/var: mount pending error: blocks 8 files 2
ums0: Microsoft Microsoft 5-Button Mouse with
IntelliEye(TM), rev 1.10/3.00, addr 3, iclass 3/1
ums0: 5 buttons and Z dir.
uhub1: illegal enable change, port 1



		
Discover Yahoo! 
Find restaurants, movies, travel and more fun for the weekend. Check it out! 
http://discover.yahoo.com/weekend.html 



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050521174221.2903.qmail>