Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 21 Feb 2013 15:36:09 -0800
From:      Jeremy Chadwick <jdc@koitsu.org>
To:        Alexander Motin <mav@FreeBSD.org>
Cc:        freebsd-fs@freebsd.org, avg@freebsd.org
Subject:   Re: disk "flipped" - a known problem?
Message-ID:  <20130221233609.GA92249@icarus.home.lan>
In-Reply-To: <51267055.3040500@FreeBSD.org>
References:  <20130121221617.GA23909@icarus.home.lan> <50FED818.7070704@FreeBSD.org> <20130125083619.GA51096@icarus.home.lan> <20130125211232.GA3037@icarus.home.lan> <20130125212559.GA1772@icarus.home.lan> <20130125213209.GA1858@icarus.home.lan> <20130126011754.GA1806@icarus.home.lan> <51267055.3040500@FreeBSD.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Feb 21, 2013 at 09:07:01PM +0200, Alexander Motin wrote:
> On 26.01.2013 03:17, Jeremy Chadwick wrote:
> > Okay, I've figured out the exact, 100% reproducible condition that
> > causes the situation.  It took me a lot of tries and a digital pocket
> > recorder to take verbal notes (there are just too many things to look at
> > simultaneously), but I've figured it out.
> > 
> > I'm sorry for the verbosity, but it's necessary.
> > 
> > Assume the disk we're talking about is /dev/ada5.
> > 
> > 1. Prior to any issues, we have this:
> > 
> > root@icarus:~ # ls -l /dev/ada5* /dev/xpt* /dev/pass5*
> > crw-r-----  1 root  operator  0x8c Jan 25 16:41 /dev/ada5
> > crw-------  1 root  operator  0x75 Jan 25 16:35 /dev/pass5
> > crw-------  1 root  operator  0x51 Jan 25 16:35 /dev/xpt0
> > 
> > 2. ada5 begins experiencing issues -- ATA commands (CDBs) submit do not
> > get a response (not going to discuss how/why that can happen).
> > 
> > 3. These types of messages are seen on console (naturally the CDB and
> > request type will vary -- in this case it was because I was doing the dd
> > zero'ing, thus tickling the bad sector/naughty firmware on the drive):
> > 
> > Jan 25 16:29:28 icarus kernel: ahcich5: Timeout on slot 0 port 0
> > Jan 25 16:29:28 icarus kernel: ahcich5: is 00000000 cs 00000000 ss 00000001 rs 00000001 tfd 40 serr 00000000 cmd 0004c017
> > Jan 25 16:29:28 icarus kernel: ahcich5: AHCI reset...
> > Jan 25 16:29:28 icarus kernel: ahcich5: SATA connect time=1000us status=00000113
> > Jan 25 16:29:28 icarus kernel: ahcich5: AHCI reset: device found
> > Jan 25 16:29:28 icarus kernel: (ada5:ahcich5:0:0:0): WRITE_FPDMA_QUEUED.  ACB: 61 80 80 77 01 40 00 00 00 00 00 00
> > Jan 25 16:29:28 icarus kernel: (ada5:ahcich5:0:0:0): CAM status: Command timeout
> > Jan 25 16:29:28 icarus kernel: (ada5:ahcich5:0:0:0): Retrying command
> > 
> > 4. Any I/O submit to ada5 during this time blocks (this is normal).
> > 
> > 5. **While this situation is happening**, something using xpt(4)
> > attempts to submit a CDB to the disk (ex. smartctl -a /dev/ada5).
> > This request also blocks (again, normal).
> > 
> > 6. Physical device falls off bus, or CAM kicks the disk off the bus.
> > Doesn't matter which.  We see messages resembling this (boy am I tired
> > of this interspersed output problem):
> > 
> > Jan 25 16:29:32 icarus kernel: (ada5:ahcich5:0:0:0): lost device
> > Jan 25 16:29:32 icarus kernel: (pass5:ahcich5:0:0:0): lost device
> > Jan 25 16:29:32 icarus kernel: (ada5:ahcich5:0:0:0): removing device entry
> > Jan 25 16:29:32 icarus kernel: (pass5:ahcich5:0:0:0): passdevgonecb: devfs entry is gone
> > 
> > 7. Standard I/O requests fail with errno=6 "Device not configured".
> > xpt(4) requests also fail with the same errno.
> > 
> > 8. Device-wise, at this stage all we have is:
> > 
> > root@icarus:~ # ls -l /dev/ada5* /dev/xpt* /dev/pass5*
> > crw-------  1 root  operator  0x51 Jan 25 16:35 /dev/xpt0
> > 
> > 9. Device comes back online for whatever reason.  FreeBSD sees the disk,
> > blah blah blah:
> > 
> > Jan 25 16:30:16 icarus kernel: GEOM: new disk ada5
> > Jan 25 16:30:16 icarus kernel: ada5: <WDC WD1500ADFD-00NLR4 21.07QR4> ATA-7 SATA 1.x device
> > Jan 25 16:30:16 icarus kernel: ada5: Serial Number WD-WMAP41573589
> > Jan 25 16:30:16 icarus kernel: ada5: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
> > Jan 25 16:30:16 icarus kernel: ada5: Command Queueing enabled
> > Jan 25 16:30:16 icarus kernel: ada5: 143089MB (293046768 512 byte sectors: 16H 63S/T 16383C)
> > Jan 25 16:30:16 icarus kernel: ada5: Previously was known as ad14
> > 
> > ...um, where's pass5?
> > 
> > 10. /dev/pass5 is now completely (permanently) missing:
> > 
> > root@icarus:~ # ls -l /dev/ada5* /dev/xpt* /dev/pass5*
> > crw-r-----  1 root  operator  0x99 Jan 25 16:42 /dev/ada5
> > crw-------  1 root  operator  0x51 Jan 25 16:35 /dev/xpt0
> > 
> > 11. Any further attempts to communicate via xpt(4) with ada5 fail.
> > Detaching and reattaching the disk does not fix the issue; the only fix
> > is to reboot the system.
> > 
> > 12. "camcontrol debug -IPXp scbus5" results in tons and tons of output
> > all pertaining to xpt(4).  It looks like xpt(4) is in some kind of
> > loop.
> > 
> > Below is my verbose boot (with non-kernel things removed), which
> > also includes "camcontrol debug" output once things are in a bad state:
> > 
> > http://jdc.koitsu.org/freebsd/xpt_oddity.log
> > 
> > In this log you'll see that after 1 CAM timeout I yanked the drive, then
> > roughly 30 seconds later reinserted it.
> > 
> > If you need me to turn on CAM debugging *prior* to the above, I can do
> > that, just let me know.
> > 
> > The important step is #5.  Without that, the problem shown in #9/10/11
> > does not happen.
> > 
> > It's a good thing I don't run smartd(8) -- most users I see using that
> > software set the interval to something like 180s or 60s.  Imagine this
> > frustration: "okay so the disk fell off the bus, but what, now I can't
> > talk to it with SMART?  Uhhh... <reboots>  Err, works now?  Whatever".
> 
> I think, the problem may already be fixed in HEAD by r244014 by ken@.
> I've just merged it to 9-STABLE at r247115. So if it is still possible
> to reproduce the situation, it would be good to try.

Yep, I saw the commit per svn-src-stable-9@freebsd.org, along with
a bunch of others; I wasn't sure if r247114 or r247115 fixed it, so ws
waiting for a follow-up from you.  :-)

I'll rebuild world/kernel and try it out + report back.  Thank you (and
ken@ too!) for the work on this.

-- 
| Jeremy Chadwick                                   jdc@koitsu.org |
| UNIX Systems Administrator                http://jdc.koitsu.org/ |
| Mountain View, CA, US                                            |
| Making life hard for others since 1977.             PGP 4BD6C0CB |



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20130221233609.GA92249>