Date: Wed, 9 Jul 2003 19:33:17 +0100 From: "Tomas Hodan" <tomas@hodan.sk> To: "'Wilko Bulte'" <wkb@freebie.xs4all.nl> Cc: freebsd-scsi@freebsd.org Subject: RE: ql2200 Message-ID: <000401c34648$91913c70$3564f892@emea.ads.autodesk.com> In-Reply-To: <20030709171648.GA36114@freebie.xs4all.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
I loaded the ispfw.ko -----Original Message----- From: 'Wilko Bulte' [mailto:wkb@freebie.xs4all.nl] Sent: Wednesday, July 09, 2003 6:17 PM To: Tomas Hodan Cc: freebsd-scsi@freebsd.org Subject: Re: ql2200 On Wed, Jul 09, 2003 at 02:32:31PM +0100, Tomas Hodan wrote: And did you load ispfw.ko or not? > I tried another ibm intellistation z pro (a current model) and ql2322 > (dual 2GBit fibre) and another disk array (ibm) with same results. > > tomas > > -----Original Message----- > From: Wilko Bulte [mailto:wkb@freebie.xs4all.nl] > Sent: Tuesday, July 08, 2003 8:28 PM > To: Tomas Hodan > Cc: freebsd-scsi@freebsd.org > Subject: Re: ql2200 > > > On Tue, Jul 08, 2003 at 04:37:27PM +0100, Tomas Hodan wrote: > > Matt (who wrote the isp driver) will ask you if you loaded ispfw.ko > (the firmware for the cards the isp driver supports). > > Wilko > > > > > I have problem to get running qlogic 2200 in current. I have tried > > diffenet qlogic boards (but all was ql2200), different qlogic bios, > > disk arrays, different freebsd version, different pci slots. > > > > with current version (cvs and build) from > > Jul 7 10:11:48 pica kernel: FreeBSD 5.1-CURRENT #0: Fri Jul 4 > > 14:03:50 GMT 2003 > > > > I'm getting this error : > > > > Jul 7 10:11:49 pica kernel: isp0: <Qlogic ISP 2200 PCI FC-AL > > Adapter> > > > port 0x9800-0x98ff mem 0xf2003000-0xf2 003fff irq 11 at device 8.0 > > on > > pci3 Jul 7 10:11:49 pica kernel: isp0: Polled Mailbox Command (0x2) > > Timeout Jul 7 10:11:49 pica kernel: device_probe_and_attach: isp0 > > attach returned 6 > > > > sometimes the kernel stays in this state forever, sometime after > > sometime it finish booting. I had twice succesfull boot with the > > qlogic board and I was able to use the disks connected to the board. > > after next reboot it stops to work. > > > > anyone any ides? > > > > thanks > > tomas > > > > _______________________________________________ > > freebsd-scsi@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-scsi > > To unsubscribe, send any mail to > > "freebsd-scsi-unsubscribe@freebsd.org" > ---end of quoted text--- > > -- > | / o / /_ _ wilko@FreeBSD.org > |/|/ / / /( (_) Bulte ---end of quoted text--- -- | / o / /_ _ wilko@FreeBSD.org |/|/ / / /( (_) Bulte
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000401c34648$91913c70$3564f892>