Date: Thu, 8 Nov 2018 12:47:50 -0500 From: Jordan Caraballo <jordancaraballo87@gmail.com> To: ian@freebsd.org Cc: eugen@grosbein.net, freebsd-stable@freebsd.org, freebsd-questions@freebsd.org Subject: Re: sudo not available after configuring ipmi serial over lan Message-ID: <CABoP_SSm919C7n=ePJeYEn8BuR8TfR0zyaU%2Bbj%2B40F8Qc-JJVg@mail.gmail.com> In-Reply-To: <1541691574.52306.94.camel@freebsd.org> References: <CABoP_SQSc2wnJqYXg6AUF1C3_SbyDiLYOa2_0u5oRLcOERZOMg@mail.gmail.com> <fdf67645-130d-78fd-c3f7-b0d58c6343e5@grosbein.net> <1541691574.52306.94.camel@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Ian, Changing the line following line from std.115200 to 3wire.115200 worked. Can you explain the why? I am not entirely sure of the difference between 3wire and std there. ttyu0 "/usr/libexec/getty 3wire.115200" vt100 on secure Thanks, - Jordan El jue., 8 nov. 2018 a las 10:39, Ian Lepore (<ian@freebsd.org>) escribi=C3= =B3: > On Thu, 2018-11-08 at 06:10 +0700, Eugene Grosbein wrote: > > 08.11.2018 5:56, Jordan Caraballo wrote: > > > > > > > > Hi guys, > > > > > > After configuring ipmi serial over lan console, I am not being able > > > to > > > execute any command related to sudo; not even "sudo su -". I am > > > using ttyu0 > > > and COM1 on a Dell R530. Everything regarding receiving output and > > > typing > > > at the serial console is fine; the only command not working is > > > sudo. > > > > > > Any ideas? Below are the configurations. > > > > > > /etc/ttys > > > > > > # Serial terminals > > > # The 'dialup' keyword identifies dialin lines to login, fingerd > > > etc. > > > #ttyu0 "/usr/libexec/getty 3wire" vt100 onifconsole secure > > > ttyu0 "/usr/libexec/getty std.115200" vt100 on secure > > Use network access to perform the following: > > > > 1) Change "on" to "off" for ttyu0 then run "init q" to apply changes. > > 2) Replace "ttyu0" with "cuau0" within same line then run "init q" > > again. > > > > Then retry using console and sudo. > > The easy way to accomplish the same thing is to change std.115200 to > 3wire.115200 (and then do 'init q'). > > -- Ian > --=20 Jordan
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CABoP_SSm919C7n=ePJeYEn8BuR8TfR0zyaU%2Bbj%2B40F8Qc-JJVg>