Date: Tue, 21 Oct 1997 07:03:42 -0500 From: "Jonathan E. Lyons" <parrothd@midwest.net> To: Chad Hurley <hurleyc@rferl.org>, questions@FreeBSD.ORG Subject: Re: ThinNet to 10 Base-T Message-ID: <2.2.32.19971021120342.009461e0@midwest.net>
next in thread | raw e-mail | index | archive | help
On the cheaper kingstons, I had to use their setup software and specify the connection type... Later At 04:52 PM 10/20/97 -0500, Chad Hurley wrote: >Hello-- > >I am having problems switching my network from ThinNet to 10 Base-T. It is >a Kingston combo card running at the de0 address. I thought it was >auto-sensing but apparently there is something I need to set in FreeBSD. >Can anyone tell me how I change the connection setting from BNC to 10 >Base-T? > >The following is the dmesg. > >Thanks for any help. > >Chad Hurley > >****************************************************************************** > >FreeBSD 2.2.2-RELEASE #0: Mon Oct 20 16:27:59 EDT 1997 > hurleyc@frbsd.rferl.org:/usr/src/sys/compile/FRBSD >CPU: Pentium (149.69-MHz 586-class CPU) > Origin = "GenuineIntel" Id = 0x52c Stepping=12 > Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> >real memory = 33554432 (32768K bytes) >avail memory = 30486528 (29772K bytes) >Probing for devices on PCI bus 0: >chip0 <Intel 82439> rev 1 on pci0:0 >chip1 <Intel 82371SB PCI-ISA bridge> rev 0 on pci0:7:0 >chip2 <Intel 82371SB IDE interface> rev 0 on pci0:7:1 >de0 <Digital 21041 Ethernet> rev 17 int a irq 10 on pci0:11 >de0: 21041 [10Mb/s] pass 1.1 >de0: address 00:c0:f0:14:f9:d5 >vga0 <VGA-compatible display device> rev 67 int a irq 11 on pci0:12 >Probing for devices on the ISA bus: >sc0 at 0x60-0x6f irq 1 on motherboard >sc0: VGA color <16 virtual consoles, flags=0x0> >sio0 at 0x3f8-0x3ff irq 4 on isa >sio0: type 16550A >sio1 at 0x2f8-0x2ff irq 3 on isa >sio1: type 16550A >fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa >fdc0: NEC 72065B >fd0: 1.44MB 3.5in >wdc0 at 0x1f0-0x1f7 irq 14 on isa >wdc0: unit 0 (wd0): <FUJITSU M1636TAU> >wd0: 1225MB (2509920 sectors), 2490 cyls, 16 heads, 63 S/T, 512 B/S >de0: enabling BNC port > > > > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2.2.32.19971021120342.009461e0>