Date: Fri, 15 Jun 2001 23:59:55 -0400 From: Tim Smith <tsmith@apptechnc.net> To: freebsd-questions@freebsd.org Cc: tsmith@apptechnc.net Subject: ed0 attach returned 6; no PNP OS Message-ID: <20010615235955.A405@threads.polyesthetic.msg>
next in thread | raw e-mail | index | archive | help
I've checked the mailing list archives and searched the web site.
My problem should be solved by setting PNP OS to No in the BIOS.
But that doesn't change anything. I still get this when I boot:
ed0: <NE2000 PCI Ethernet (ProLAN)> port 0xd800-0xd81f irq 10 at device 10.0 on pci0
device_probe_and_attach: ed0 attach returned 6
This is FreeBSD-stable, cvsup'd June 14 2001 at 17:50 UTC,
followed by 'make world', mergemaster and several 'make kernel'
experiments.
My BIOS is the ASUS P5A ACPI BIOS Rev. 1007.A. On the PNP
configuration screen I have tried both "No" and "Yes" for the
"PNP OS Installed" question. The dmesg output is identical -
listed below ("normal dmesg"). I also tried changing all of
the "IRQ [3, 4, ...] Used by ISA" questions from "No/ICU" to
"Yes". This confused some things (see "confused dmesg" below),
but didn't solve anything. I also tried compiling a kernel with
options PNPBIOS, with miibus, and without sound-card, VESA, and
EXT2FS support, and tried with "PNP OS Installed" set to both Yes
and No, but it didn't make things work.
I know this is a piece of $#!% card, but it seems like it's not a
hardware problem I'm running into. If you could please look over
my kernel config and the verbose boot messages, to see if I've
done something wrong, I would appreciate it very much!
Thanks a bunch,
Tim
Search for '^== ' to skip a file.
== KERNCONF=THREADS ====================================================
#
# THREADS -- kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.FreeBSD.org/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $FreeBSD$
machine i386
cpu I586_CPU
ident THREADS
maxusers 256
makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options SOFTUPDATES #Enable FFS soft updates support
options MFS #Memory Filesystem
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
# To make an SMP kernel, the next two are needed
device isa
device eisa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
# ATA and ATAPI devices
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
options ATA_STATIC_ID #Static device numbering
# SCSI Controllers
# Allow ncr to attach legacy NCR devices when
# both sym and ncr are configured
# SCSI peripherals
# RAID controllers interfaced to the SCSI subsystem
# RAID controllers
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? flags 0x100
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
# PCCARD (PCMCIA) support
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device sio2 at isa? disable port IO_COM3 irq 5
device sio3 at isa? disable port IO_COM4 irq 9
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
# PCI Ethernet NICs.
device ed # Piece-of-shit network card
# PCI Ethernet NICs that use the common MII bus controller code.
# ISA Ethernet NICs.
# Pseudo devices - the number indicates how many units to allocate.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
pseudo-device gif 4 # IPv6 and IPv4 tunneling
pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf #Berkeley packet filter
# USB support
# USB Ethernet, requires mii
#options PNPBIOS
options NO_F00F_HACK
options NO_MEMORY_HOLE
#options INVARIANTS
#options INVARIANT_SUPPORT
options EXT2FS
options VESA
#options PSM_RESETAFTERSUSPEND
# So we can create lots of threads
options MAXDSIZ="(256*1024*1024)" # 2x the default
options DFLDSIZ="(256*1024*1024)" # 2x the default
options NMBCLUSTERS=4096 # 4x the default
options PMAP_SHPGPERPROC=400 # 2x the default
device pcm
== /etc/make.conf ======================================================
#CPUTYPE= k6-2
#CFLAGS= -O2 -fno-strength-reduce -pipe
CFLAGS= -O -pipe
COPTFLAGS= -O -pipe
NO_FORTRAN= true
NO_LPR= true
NO_SENDMAIL= true
NO_SHAREDOCS= true
NO_TCSH= true
NOPROFILE= true
NOUUCP= true
TOP_TABLE_SIZE= 101
XFREE86_VERSION= 4
HAVE_MOTIF= YES
USA_RESIDENT= YES
MASTER_SITE_BACKUP?= \
ftp://ftp2.freebsd.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/
MASTER_SITE_OVERRIDE?= ${MASTER_SITE_BACKUP}
== normal dmesg ========================================================
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #2: Fri Jun 15 15:40:04 EDT 2001
root@threads.polyesthetic.msg:/usr/obj/usr/src/sys/THREADS
Calibrating clock(s) ... TSC clock: 451019575 Hz, i8254 clock: 1193174 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 451023565 Hz
CPU: AMD-K6(tm) 3D processor (451.02-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
Data TLB: 128 entries, 2-way associative
Instruction TLB: 64 entries, 1-way associative
L1 data cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
L1 instruction cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
Write Allocate Enable Limit: 512M bytes
Write Allocate 15-16M bytes: Enable
real memory = 536854528 (524272K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00302000 - 0x1fff3fff, 533667840 bytes (130290 pages)
avail memory = 519483392 (507308K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f9d50
bios32: Entry = 0xf0690 (c00f0690) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x6c0
pnpbios: Found PnP BIOS data at 0xc00fd1d0
pnpbios: Entry = f0000:d200 Rev = 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
ACPI: 000f81a0
Preloaded elf kernel "kernel" at 0xc02dc000.
VESA: information block
56 45 53 41 00 02 ca 6c 00 c0 01 00 00 00 74 69
00 c0 00 02 05 01 df 6c 00 c0 e6 6c 00 c0 f2 6c
00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VESA: 11 mode(s) found
VESA: v2.0, 32768k memory, flags:0x1, mode table:0xc00c6974 (c0006974)
VESA: Matrox Graphics Inc.
VESA: Matrox Matrox G400 00
K6-family MTRR support enabled (2 registers)
md0: Malloc disk
Creating DISK md0
pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=154110b9)
npx0: <math processor> on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 99631363 bytes/sec
bzero() bandwidth = 133850890 bytes/sec
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=154110b9)
pcib0: <AcerLabs M1541 (Aladdin-V) PCI host bridge> on motherboard
found-> vendor=0x10b9, dev=0x1541, revid=0x04
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base e0000000, size 26
found-> vendor=0x10b9, dev=0x5243, revid=0x04
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x10b9, dev=0x7101, revid=0x00
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x10b9, dev=0x1533, revid=0xc3
class=06-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x1050, dev=0x0940, revid=0x00
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base 0000d800, size 5
found-> vendor=0x1073, dev=0x000d, revid=0x03
class=04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base de000000, size 15
found-> vendor=0x10b9, dev=0x5229, revid=0xc1
class=01-01-8a, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=0
map[20]: type 1, range 32, base 0000d400, size 4
pci0: <PCI bus> on pcib0
pcib1: <AcerLabs M5243 PCI-PCI bridge> at device 1.0 on pci0
found-> vendor=0x102b, dev=0x0525, revid=0x04
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base e6000000, size 25
map[14]: type 1, range 32, base df800000, size 14
map[18]: type 1, range 32, base df000000, size 23
pci1: <PCI bus> on pcib1
pci1: <Matrox MGA G400 AGP graphics accelerator> (vendor=0x102b, dev=0x0525) at 0.0 irq 11
chip1: <AcerLabs M15x3 Power Management Unit> at device 3.0 on pci0
isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
ed0: <NE2000 PCI Ethernet (ProLAN)> port 0xd800-0xd81f irq 10 at device 10.0 on pci0
device_probe_and_attach: ed0 attach returned 6
pcm0: <Yamaha DS-1E (YMF724F)> mem 0xde000000-0xde007fff irq 11 at device 12.0 on pci0
ds1: setmap (1000, 3de4), nseg=1, error=0
pcm0: ac97 codec id 0x574d4c00
pcm0: ac97 codec features 18 bit DAC, 18 bit ADC, 6 bit master volume, no 3D Stereo Enhancement
pcm: setmap 11000, 1000; 0xd5c98000 -> 11000
pcm: setmap 21000, 1000; 0xd5ca8000 -> 21000
pcm: setmap 31000, 1000; 0xd5cb8000 -> 31000
pcm: setmap 41000, 1000; 0xd5cc8000 -> 41000
pcm: setmap 51000, 1000; 0xd5cd8000 -> 51000
pcm: setmap 61000, 1000; 0xd5ce8000 -> 61000
atapci0: <AcerLabs Aladdin ATA33 controller> port 0xd400-0xd40f irq 0 at device 15.0 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xd400
ata0: mask=03 status0=50 status1=50
ata0: mask=03 ostat0=50 ostat2=50
ata0-master: ATAPI probe a=00 b=00
ata0-slave: ATAPI probe a=00 b=00
ata0: mask=03 status0=50 status1=50
ata0-master: ATA probe a=01 b=a5
ata0-slave: ATA probe a=01 b=a5
ata0: devices=03
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xd408
ata1: mask=03 status0=50 status1=00
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI probe a=14 b=eb
ata1-slave: ATAPI probe a=14 b=eb
ata1: mask=03 status0=00 status1=00
ata1: devices=0c
ata1: at 0x170 irq 15 on atapci0
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: irq maps: 0x41 0x41 0x41 0x41
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03ff0f3f 0..1023=1024 cylinders, 0..15=16 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
bpf: lo0 attached
bpf: faith0 attached
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable
ata0-master: success setting UDMA2 on Acer chip
Creating DISK ad0
ad0: <IBM-DTLA-307030/TX4OA50C> ATA-5 disk at ata0-master
ad0: 29314MB (60036480 sectors), 59560 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=5 cblid=0
ad0: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata0-master UDMA33
ata0-slave: DMA limited to UDMA33, non-ATA66 compliant cable
ata0-slave: success setting UDMA2 on Acer chip
Creating DISK ad1
ad1: <FUJITSU MPE3084AE/EE-C0-23> ATA-4 disk at ata0-slave
ad1: 8063MB (16514064 sectors), 16383 cyls, 16 heads, 63 S/T, 512 B/S
ad1: 16 secs/int, 1 depth queue, UDMA33
ad1: piomode=4 dmamode=2 udmamode=4 cblid=0
ad1: 8063MB <FUJITSU MPE3084AE> [16383/16/63] at ata0-slave UDMA33
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <TOSHIBA DVD-ROM SD-M1402/1008> DVD-ROM drive at ata1 as master
acd0: read 6890KB/s (6890KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, packet
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 1023119, size 1023057 : OK
ad0s2: type 0xa5, start 1023120, end = 20724479, size 19701360 : OK
ad0s3: type 0xa5, start 20724480, end = 41204015, size 20479536 : OK
ad0s4: type 0xa5, start 41204016, end = 60036479, size 18832464 : OK
start_init: trying /sbin/init
splash: image decoder found: green_saver
Linux-ELF exec handler installed
== confused dmesg diff =================================================
--- dmesg.pnp-normal Fri Jun 15 22:51:21 2001
+++ dmesg.pnp-isa-yes Fri Jun 15 22:46:41 2001
@@ -5,3 +5,3 @@
root@threads.polyesthetic.msg:/usr/obj/usr/src/sys/THREADS
-Calibrating clock(s) ... TSC clock: 451019575 Hz, i8254 clock: 1193174 Hz
+Calibrating clock(s) ... TSC clock: 451019252 Hz, i8254 clock: 1193173 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
@@ -9,3 +9,3 @@
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
-Timecounter "TSC" frequency 451023565 Hz
+Timecounter "TSC" frequency 451024142 Hz
CPU: AMD-K6(tm) 3D processor (451.02-MHz 586-class CPU)
@@ -51,4 +51,4 @@
npx0: INT 16 interface
-i586_bzero() bandwidth = 99631363 bytes/sec
-bzero() bandwidth = 133850890 bytes/sec
+i586_bzero() bandwidth = 99641291 bytes/sec
+bzero() bandwidth = 133868808 bytes/sec
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
@@ -73,3 +73,3 @@
subordinatebus=0 secondarybus=0
- intpin=a, irq=10
+ intpin=a, irq=255
map[10]: type 1, range 32, base 0000d800, size 5
@@ -78,3 +78,3 @@
subordinatebus=0 secondarybus=0
- intpin=a, irq=11
+ intpin=a, irq=255
map[10]: type 1, range 32, base de000000, size 15
@@ -90,3 +90,3 @@
subordinatebus=0 secondarybus=0
- intpin=a, irq=11
+ intpin=a, irq=0
map[10]: type 1, range 32, base e6000000, size 25
@@ -95,3 +95,3 @@
pci1: <PCI bus> on pcib1
-pci1: <Matrox MGA G400 AGP graphics accelerator> (vendor=0x102b, dev=0x0525) at 0.0 irq 11
+pci1: <Matrox MGA G400 AGP graphics accelerator> (vendor=0x102b, dev=0x0525) at 0.0 irq 0
chip1: <AcerLabs M15x3 Power Management Unit> at device 3.0 on pci0
@@ -99,5 +99,5 @@
isa0: <ISA bus> on isab0
-ed0: <NE2000 PCI Ethernet (ProLAN)> port 0xd800-0xd81f irq 10 at device 10.0 on pci0
+ed0: <NE2000 PCI Ethernet (ProLAN)> port 0xd800-0xd81f at device 10.0 on pci0
device_probe_and_attach: ed0 attach returned 6
-pcm0: <Yamaha DS-1E (YMF724F)> mem 0xde000000-0xde007fff irq 11 at device 12.0 on pci0
+pcm0: <Yamaha DS-1E (YMF724F)> mem 0xde000000-0xde007fff at device 12.0 on pci0
ds1: setmap (1000, 3de4), nseg=1, error=0
@@ -105,8 +105,4 @@
pcm0: ac97 codec features 18 bit DAC, 18 bit ADC, 6 bit master volume, no 3D Stereo Enhancement
-pcm: setmap 11000, 1000; 0xd5c98000 -> 11000
-pcm: setmap 21000, 1000; 0xd5ca8000 -> 21000
-pcm: setmap 31000, 1000; 0xd5cb8000 -> 31000
-pcm: setmap 41000, 1000; 0xd5cc8000 -> 41000
-pcm: setmap 51000, 1000; 0xd5cd8000 -> 51000
-pcm: setmap 61000, 1000; 0xd5ce8000 -> 61000
+pcm0: unable to map interrupt
+device_probe_and_attach: pcm0 attach returned 6
atapci0: <AcerLabs Aladdin ATA33 controller> port 0xd400-0xd40f irq 0 at device 15.0 on pci0
== sudo pciconf -l =====================================================
chip0@pci0:0:0: class=0x060000 card=0x154110b9 chip=0x154110b9 rev=0x04 hdr=0x00
pcib1@pci0:1:0: class=0x060400 card=0x000000e0 chip=0x524310b9 rev=0x04 hdr=0x01
chip1@pci0:3:0: class=0x068000 card=0x710110b9 chip=0x710110b9 rev=0x00 hdr=0x00
isab0@pci0:7:0: class=0x060100 card=0x00000000 chip=0x153310b9 rev=0xc3 hdr=0x00
none0@pci0:10:0: class=0x020000 card=0x00000000 chip=0x09401050 rev=0x00 hdr=0x00
pcm0@pci0:12:0: class=0x040100 card=0x000d1073 chip=0x000d1073 rev=0x03 hdr=0x00
atapci0@pci0:15:0: class=0x01018a card=0x00000000 chip=0x522910b9 rev=0xc1 hdr=0x00
none1@pci1:0:0: class=0x030000 card=0x217d102b chip=0x0525102b rev=0x04 hdr=0x00
== sudo pnpinfo ========================================================
Checking for Plug-n-Play devices...
No Plug-n-Play devices were found
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010615235955.A405>