Date: Tue, 27 May 2003 10:27:22 +1000 From: paul van den bergen <pvandenbergen@swin.edu.au> To: freebsd-hardware@freebsd.org Subject: VIA EPIA 800MHz + 80GB seagate baracuda + freeBSD 4.8 = boot problem Message-ID: <200305271027.22829.pvandenbergen@swin.edu.au>
next in thread | raw e-mail | index | archive | help
Hi all, I am attempting to install FreeBSD 4.8 on a brand new VIA EPIA C3E based=20 MiniITX board. HDD is an 80 GB baracudda 7200 rpm seagate. 256 MB ram, C= Drom=20 install media. interfacing via KVM (no hassles there) on boot, no problems, kernel from CD loads, install proceeds just fine. on reboot of configured machine however, boot loader screen comes up fine= ,=20 select boot partition (I have tried a number of combinations), OK, loads=20 kernel OK from HDD. but when the kernel starts to load (e.g. after pressi= ng=20 enter when asked to press enter to load kernel or any other key for comma= nd=20 prompt) the screen shows non-random rapid scrolling data - looks like cor= e=20 dump info or something - i.e. it has structure but is too fast to see. KB= =20 does not respond after this.... anyone? HELP! --=20 Dr Paul van den Bergen Centre for Advanced Internet Architectures caia.swin.edu.au pvandenbergen@swin.edu.au IM:bulwynkl2002 "And some run up hill and down dale, knapping the chucky stones=20 to pieces wi' hammers, like so many road makers run daft.=20 They say it is to see how the world was made." Sir Walter Scott, St. Ronan's Well 1824=20
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200305271027.22829.pvandenbergen>