Date: Mon, 22 Jun 2009 21:32:56 +0400 From: The Ghost <the-ghost@inbox.ru> To: freebsd-questions@freebsd.org Subject: CPU temperature on TUSL2-C Message-ID: <4A3FC048.1040406@inbox.ru>
next in thread | raw e-mail | index | archive | help
Hello, I am trying to find out the temperature of my CPU. After a whole night from dusk till dawn of searching the Web like a furious spider, I got the following results: it can be done via either ISA or SMB, with one of the ports: lmmon, healthd, consolehm or mbmon, and there are also few modules that are required in the kernel: smb, smbus, intpm, ichsmb (TUSL2-C has ICH so this is the one needed) and maybe also iic, iicsmb, iicbb and nfsmb (I have included them just in case). The ones my system reacted at was ichsmb (it finds my ICH) and smb (in creates a /dev/smb0 device). It looks natural enough. When I'm trying to use mbmon, it fails with: PSYCHE:~> sudo mbmon ioctl(smb0:writebyte): Device not configured I wonder what that means... I think it should work fine with mbmon, but I can't fid the answer what this means. All the other fail also, and mbmon -I does not work either: PSYCHE:~> sudo mbmon -I No ISA-IO HWM available!! InitMBInfo: Unknown error: 0 PSYCHE:~> sudo lmmon IOCTL: Device not configured PSYCHE:~> sudo lmmon -i Motherboard Temp Voltages 255C / 491F / 528K Vcore1: +3.984V Vcore2: +3.984V Fan Speeds + 3.3V: +3.984V + 5.0V: +6.654V 1: 0 rpm +12.0V: +15.938V 2: 0 rpm -12.0V: -15.938V 3: 0 rpm - 5.0V: -6.654V PSYCHE:~> sudo healthd -d -S ************************ * Hardware Information * ************************ Asus: AS99127F ************************ Temp.= 36.0, 0.0, 0.0; Rot.= 0, 0, 0 Vcore = 1.71, 1.71; Volt. = -0.66, 5.00, 12.25, -11.65, -5.02 (note that neither of the results seem to be real and they never change) PSYCHE:~> sudo healthd -d -I ************************ * Hardware Information * ************************ Unknown Vendor: ID = FFFF ************************ Temp.= 255.0, 0.0, 0.0; Rot.= 0, 0, 0 Vcore = 4.08, 4.08; Volt. = 4.08, 6.85, 15.50, -14.16, -6.12 (the same thing) PSYCHE:~> sudo chm ioctl: Device not configured ---------------------------------------- IOCTL: Device not configured IOCTL: Device not configured IOCTL: Device not configured IOCTL: Device not configured IOCTL: Device not configured IOCTL: Device not configured IOCTL: Device not configured IOCTL: Device not configured IOCTL: Device not configured IOCTL: Device not configured Motherboard Temperature: 0 � C CPU_0 Temperature: 0 � C CPU_1 Temperature: 0 � C IOCTL: Device not configured VCore: 0 V IOCTL: Device not configured Vit: 0 V IOCTL: Device not configured Vio: 0 V IOCTL: Device not configured +5V: 0 V IOCTL: Device not configured +12V: 0 V IOCTL: Device not configured -12V: -0 V IOCTL: Device not configured -5V: -0 V IOCTL: Device not configured Fan 1: -2147483648 rpm IOCTL: Device not configured Fan 2: -2147483648 rpm IOCTL: Device not configured Fan 3: -2147483648 rpm ---------------------------------------- Does anybody know what's the matter with TUSL2-C (I suspect it's a hardware-related problem after all) or what that line about "smb0 not configured" mean? The hardware works fine (it displays my temperature well in BIOS Setup).
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4A3FC048.1040406>