Date: Thu, 4 Jun 1998 08:50:01 -0700 (PDT) From: David Gilbert <dgilbert@velocet.ca> To: freebsd-bugs@FreeBSD.ORG Subject: Re: kern/6853: Inactive de0 leads to hang with windoze box. Message-ID: <199806041550.IAA24345@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/6853; it has been noted by GNATS. From: David Gilbert <dgilbert@velocet.ca> To: "Matthew N. Dodd" <winter@jurai.net> Cc: David Gilbert <dgilbert@velocet.ca>, FreeBSD-gnats-submit@FreeBSD.ORG Subject: Re: kern/6853: Inactive de0 leads to hang with windoze box. Date: Thu, 4 Jun 1998 11:41:06 -0400 (EDT) >>>>> "Matthew" == Matthew N Dodd <winter@jurai.net> writes: Matthew> I'm guessing it must be hardware related as I've got nearly Matthew> the same config and am operating without problems. Matthew> I've got a Znyx ZX314 (4 21040s behind a bridge) and am only Matthew> using de1. Could be... but it could also be related to the PCI controler. You have some from of PCI controller on the Znyx board. My PCI chipset is the VIA Apollo VP3. Could you tell me where I could source a few of those? Matthew> [sasami]:/var/run> uname -a FreeBSD sasami.jurai.net Matthew> 2.2.6-STABLE FreeBSD 2.2.6-STABLE #0: Fri Apr 10 16:09:12 EDT Matthew> 1998 winter@sasami.jurai.net:/usr/src/sys/compile/SASAMI i386 FreeBSD trooper.velocet.ca 2.2.6-RELEASE FreeBSD 2.2.6-RELEASE #0: Fri Apr 24 16:26:11 EDT 1998 root@trooper.velocet.ca:/usr/src/sys/compile/TROOPER i386 (What's the difference between RELEASE and STABLE ?) Matthew> [sasami]:/var/run> uptime 11:22AM up 54 days, 21:43, 20 Matthew> users, load averages: 0.03, 0.15, 0.15 Matthew> Do an `ifconfig -a` and `netstat -rn` and show us what they Matthew> say. Now... I have the card unplugged right now. It might be a day or two before I have my machine down again. Tell me if seeing that output would be important to you in addition to this (And then I'll send it to you next time I reboot). De0 in my case was set to 10.0.0.1 with a Class C sized route. Is your de0 configured... My ifconfig line are: #ifconfig_de0="inet 10.0.0.1 netmask 255.255.255.0" ifconfig_de0="inet 209.146.201.34 netmask 255.255.255.224" ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. de0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 209.146.201.34 netmask 0xffffffe0 broadcast 209.146.201.63 ether 00:c0:f0:17:39:3e media: autoselect (10baseT/UTP) status: active lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500 tun0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500 tun1: flags=8010<POINTOPOINT,MULTICAST> mtu 1500 tun2: flags=8010<POINTOPOINT,MULTICAST> mtu 1500 tun3: flags=8010<POINTOPOINT,MULTICAST> mtu 1500 sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet 127.0.0.1 netmask 0xff000000 Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire default 209.146.201.33 UGSc 66 9146 de0 127.0.0.1 127.0.0.1 UH 2 112356 lo0 209.146.201.32/27 link#1 UC 0 0 209.146.201.33 0:c0:f0:17:d5:1 UHLW 69 848 de0 385 209.146.201.34 0:c0:f0:17:39:3e UHLW 12 4226 lo0 209.146.201.35 0:0:a7:14:f4:ce UHLW 11 32937 de0 711 209.146.201.36 0:0:c0:74:e2:23 UHLW 2 1504 de0 1197 209.146.201.38 0:c0:f0:17:16:7 UHLW 3 95706 de0 1057 209.146.201.63 ff:ff:ff:ff:ff:ff UHLWb 3 556 de0 Dave. -- ============================================================================ |David Gilbert, Velocet Communications. | Two things can only be | |Mail: dgilbert@velocet.net | equal if and only if they | |http://www.velocet.net/~dgilbert | are precisely opposite. | =========================================================GLO================ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199806041550.IAA24345>