Date: Wed, 16 Jun 1999 13:28:21 -0700 (PDT) From: Matthew Jacob <mjacob@feral.com> To: Bernd Walter <ticso@cicely.de> Cc: freebsd-current@FreeBSD.ORG Subject: Re: current GENERIC still panics for me Message-ID: <Pine.BSF.4.05.9906161328060.682-100000@semuta.feral.com> In-Reply-To: <19990616205239.A85743@cicely8.cicely.de>
next in thread | previous in thread | raw e-mail | index | archive | help
Hmm! Try taking ahc8 out.... On Wed, 16 Jun 1999, Bernd Walter wrote: > This happend with kernel compiled using GENERIC: > > Console: serial port > BIOS drive A: is disk0 > BIOS drive C: is disk1 > BIOS drive D: is disk2 > > FreeBSD/i386 bootstrap loader, Revision 0.7 636/65472kB > (ticso@cicely5.cicely.de, Mon Jun 14 10:28:01 CEST 1999) > Loading /boot/defaults/loader.conf > /kernel text=0x1e02a3 data=0x23e00+0x1fa6c syms=[0x4+0x27cd0+0x4+0x27da7] > > Hit [Enter] to boot immediately, or any other key for command prompt. > Booting [kernel]... > Copyright (c) 1992-1999 The FreeBSD Project. > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > FreeBSD 4.0-CURRENT #0: Wed Jun 16 22:41:13 CEST 1999 > root@:/var/d0/src-1999-06-14/src/sys/compile/GENERIC > Timecounter "i8254" frequency 1193182 Hz > CPU: AMD-K6tm w/ multimedia extensions (233.03-MHz 586-class CPU) > Origin = "AuthenticAMD" Id = 0x562 Stepping=2 > Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> > real memory = 134217728 (131072K bytes) > sio0: system console > avail memory = 127012864 (124036K bytes) > Preloaded elf kernel "kernel" at 0xc0376000. > Probing for PnP devices: > npx0: <math processor> on motherboard > npx0: INT 16 interface > pcib0: <PCI host bus adapter> on motherboard > pci0: <PCI bus> on pcib0 > chip0: <Intel 82439HX PCI cache memory controller> at device 0.0 on pci0 > isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0 > ide_pci0: <Intel PIIX3 Bus-master IDE controller> at device 7.1 on pci0 > chip1: <Intel 82371SB (PIIX3) USB controller> irq 5 at device 7.2 on pci0 > pcib1: <DEC 21050 PCI-PCI bridge> at device 9.0 on pci0 > pci1: <PCI bus> on pcib1 > ahc0: <Adaptec 398X SCSI RAID adapter> irq 5 at device 4.0 on pci1 > ahc0: aic7870 Single Channel A, SCSI Id=7, 16/255 SCBs > ahc1: <Adaptec aic7810 RAID memory controller> irq 11 at device 5.0 on pci1 > RAID functionality unsupported > device_probe_and_attach: ahc1 attach returned 6 > ahc2: <Adaptec 398X SCSI RAID adapter> irq 5 at device 8.0 on pci1 > ahc2: aic7870 Single Channel B, SCSI Id=7, 16/255 SCBs > ahc3: <Adaptec 398X SCSI RAID adapter> irq 5 at device 12.0 on pci1 > ahc3: aic7870 Single Channel C, SCSI Id=7, 16/255 SCBs > pcib2: <DEC 21050 PCI-PCI bridge> at device 10.0 on pci0 > pci2: <PCI bus> on pcib2 > ahc4: <Adaptec 3940 Ultra SCSI adapter> irq 12 at device 4.0 on pci2 > ahc4: aic7880 Single Channel A, SCSI Id=7, 16/255 SCBs > ahc5: <Adaptec 3940 Ultra SCSI adapter> irq 5 at device 5.0 on pci2 > ahc5: aic7880 Single Channel B, SCSI Id=7, 16/255 SCBs > de0: <Digital 21140A Fast Ethernet> irq 10 at device 11.0 on pci0 > de0: Cogent 21140A [10-100Mb/s] pass 2.0 > de0: address 00:00:92:9b:20:e7 > pcib3: <DEC 21050 PCI-PCI bridge> at device 12.0 on pci0 > pci3: <PCI bus> on pcib3 > ahc6: <Adaptec 398X SCSI RAID adapter> irq 11 at device 4.0 on pci3 > ahc6: aic7870 Single Channel A, SCSI Id=7, 16/255 SCBs > ahc7: <Adaptec aic7810 RAID memory controller> irq 10 at device 5.0 on pci3 > RAID functionality unsupported > device_probe_and_attach: ahc7 attach returned 6 > ahc8: <Adaptec 398X SCSI RAID adapter> irq 11 at device 8.0 on pci3 > panic: bus_dmamem_free: Invalid map freed > > Automatic reboot in 15 seconds - press a key on the console to abort > > I already wrote a more complete mail using an older kernel and > a DDB Stack-Trace. > If someone can tell me how I can help debugging this problem I will do it. > The latest kernel I run before this problem was somewhere from April. > Maybe it's releated to newbus changes? > > -- > B.Walter COSMO-Project http://www.cosmo-project.de > ticso@cicely.de info@cosmo-project.de > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-current" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.9906161328060.682-100000>