Date: Thu, 11 Mar 2004 0:10:18 +0100 From: <walter.cruz@chello.se> To: <x11@FreeBSD.org> Subject: Problem installing XFree86-4 through ports. Message-ID: <20040310231018.UNRW28932.amsfep14-int.chello.nl@localhost>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
------=____1078960218318_vZ'_EE)0V8
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
I have alot of trouble to install it through ports. I send some info here from my computer:
[walter@Varver walter]$ uname -a
FreeBSD Varver.Playground 5.1-RELEASE FreeBSD 5.1-RELEASE #0: Thu Jun 5 02:55:42 GMT 2003 root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC i386
Attached to this e-mail is:
XFree_install.txt = the text from the try of X installation.
var_log_nessages.txt = my messages file
And I also attached the skeleton files in /usr/ports/x11/XFree86-4/
I have tried to install X about 15 times, I have deleted the complete ports collection and updated it through CVSup.
That didn't help.
If you need more tech info of my mahine plz send me a mail
// Walter
------=____1078960218318_vZ'_EE)0V8
Content-Type: text/plain;
name="Makefile"
Content-Disposition: inline;
filename="Makefile"
# New ports collection makefile for: XFree86
# Date created: 5 January 1995
# Whom: jmz
#
# $FreeBSD: ports/x11/XFree86-4/Makefile,v 1.155 2003/11/12 01:02:18 anholt Exp $
#
PORTNAME= XFree86
PORTVERSION= 4.3.0
PORTEPOCH= 1
CATEGORIES= x11
MASTER_SITES= # none
DISTFILES= # none
EXTRACT_ONLY= # none
MAINTAINER= x11@FreeBSD.org
COMMENT= X11/XFree86 core distribution (complete, using mini/meta-ports)
LIB_DEPENDS= X11.6:${PORTSDIR}/x11/XFree86-4-libraries
RUN_DEPENDS= xvinfo:${PORTSDIR}/x11/XFree86-4-clients \
${X11BASE}/lib/X11/doc/ddx.TXT:${PORTSDIR}/x11/XFree86-4-documents \
${FONT100DPI}:${PORTSDIR}/x11-fonts/XFree86-4-font100dpi \
${FONT75DPI}:${PORTSDIR}/x11-fonts/XFree86-4-font75dpi \
${FONTCYR}:${PORTSDIR}/x11-fonts/XFree86-4-fontCyrillic \
${FONTDEFAULT}:${PORTSDIR}/x11-fonts/XFree86-4-fontDefaultBitmaps \
${FONTSCALE}:${PORTSDIR}/x11-fonts/XFree86-4-fontScalable \
${X11BASE}/bin/xfs:${PORTSDIR}/x11-servers/XFree86-4-FontServer \
${X11BASE}/bin/xf86cfg:${PORTSDIR}/x11-servers/XFree86-4-Server \
${X11BASE}/bin/Xwrapper-4:${PORTSDIR}/x11/wrapper
NO_BUILD= yes
LATEST_LINK= XFree86
FONT100DPI= ${X11BASE}/lib/X11/fonts/100dpi/UTBI__10-ISO8859-1.pcf.gz
FONT75DPI= ${X11BASE}/lib/X11/fonts/75dpi/UTBI__10-ISO8859-1.pcf.gz
FONTCYR= ${X11BASE}/lib/X11/fonts/cyrillic/crox1c.pcf.gz
FONTDEFAULT= ${X11BASE}/lib/X11/fonts/misc/cursor.pcf.gz
FONTSCALE= ${X11BASE}/lib/X11/fonts/TTF/luximb.ttf
pre-everything::
@${ECHO_MSG} "This is a meta-port, meaning that it just depends on its subparts of the port."
@${ECHO_MSG} "It won't build and install all the parts until you have typed make install"
@${ECHO_MSG} "This port does not ensure things are upgraded; use portupgrade if you want to"
@${ECHO_MSG} "upgrade XFree86. If you simply type 'make install' it may use over 2GB to build"
@${ECHO_MSG} "all of the subports. You can install the ports singly if you are low on space."
.if make(package)
DEPENDS_TARGET="package"
.endif
.undef NOCLEANDEPENDS
do-install: # empty
.include <bsd.port.mk>
------=____1078960218318_vZ'_EE)0V8
Content-Type: text/plain;
name="pkg-descr"
Content-Disposition: inline;
filename="pkg-descr"
XFree86 is a added-value pack for X11R6 that supports several versions
of Intel-based Unix and Unix-like operating systems.
WWW: http://www.xfree86.org/
Note:
This the complete tarball, the distribution is also available in parts
------=____1078960218318_vZ'_EE)0V8
Content-Type: text/plain;
name="pkg-message"
Content-Disposition: inline;
filename="pkg-message"
************************************************************************
* To improve security, the X server is installed without an SUID bit. *
* This is suitable for use with xdm, but not with a startx script. *
* If you need to use a startx script, install the x11/wrapper package. *
************************************************************************
* If XFree86-4 is not a basic part of your operating system, add the *
* following line to /etc/make.conf: XFREE86_VERSION=4 *
************************************************************************
------=____1078960218318_vZ'_EE)0V8
Content-Type: text/plain;
name="pkg-plist"
Content-Disposition: inline;
filename="pkg-plist"
@comment This packing list left intentionally empty
------=____1078960218318_vZ'_EE)0V8
Content-Type: text/plain;
name="var_log_messages.txt"
Content-Disposition: inline;
filename="var_log_messages.txt"
Mar 6 02:00:00 Varver newsyslog[658]: logfile turned over due to size>100K
Mar 6 09:17:45 Varver su: BAD SU walter to root on /dev/ttyp0
Mar 6 09:18:32 Varver su: walter to root on /dev/ttyp0
Mar 6 10:38:36 Varver su: walter to root on /dev/ttyp0
Mar 6 15:01:06 Varver su: walter to root on /dev/ttyp0
Mar 6 23:16:44 Varver su: walter to root on /dev/ttyp0
Mar 6 23:30:12 Varver su: walter to root on /dev/ttyp0
Mar 6 23:39:07 Varver last message repeated 2 times
Mar 6 23:58:30 Varver su: walter to root on /dev/ttyp0
Mar 7 08:58:24 Varver su: walter to root on /dev/ttyp0
Mar 7 10:18:29 Varver su: walter to root on /dev/ttyp0
Mar 7 10:38:46 Varver su: walter to root on /dev/ttyp0
Mar 7 10:48:40 Varver su: walter to root on /dev/ttyp0
Mar 7 11:07:53 Varver su: walter to root on /dev/ttyp0
Mar 7 11:17:18 Varver last message repeated 4 times
Mar 7 14:53:25 Varver su: walter to root on /dev/ttyp0
Mar 7 23:48:12 Varver reboot: rebooted by walter
Mar 7 23:48:12 Varver syslogd: exiting on signal 15
Mar 7 23:49:08 noktork syslogd: kernel boot file is /boot/kernel/kernel
Mar 7 23:49:08 noktork kernel: Copyright (c) 1992-2003 The FreeBSD Project.
Mar 7 23:49:08 noktork kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Mar 7 23:49:08 noktork kernel: The Regents of the University of California. All rights reserved.
Mar 7 23:49:08 noktork kernel: FreeBSD 5.1-RELEASE #0: Thu Jun 5 02:55:42 GMT 2003
Mar 7 23:49:08 noktork kernel: root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Mar 7 23:49:08 noktork kernel: Preloaded elf kernel "/boot/kernel/kernel" at 0xc06d4000.
Mar 7 23:49:08 noktork kernel: Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06d41f4.
Mar 7 23:49:08 noktork kernel: Timecounter "i8254" frequency 1193182 Hz
Mar 7 23:49:08 noktork kernel: Timecounter "TSC" frequency 434320128 Hz
Mar 7 23:49:08 noktork kernel: CPU: Pentium II/Pentium II Xeon/Celeron (434.32-MHz 686-class CPU)
Mar 7 23:49:08 noktork kernel: Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Mar 7 23:49:08 noktork kernel: Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
Mar 7 23:49:08 noktork kernel: real memory = 267321344 (254 MB)
Mar 7 23:49:08 noktork kernel: avail memory = 252272640 (240 MB)
Mar 7 23:49:08 noktork kernel: Pentium Pro MTRR support enabled
Mar 7 23:49:08 noktork kernel: npx0: <math processor> on motherboard
Mar 7 23:49:08 noktork kernel: npx0: INT 16 interface
Mar 7 23:49:08 noktork kernel: acpi0: <FIC CW33 > on motherboard
Mar 7 23:49:08 noktork kernel: pcibios: BIOS version 2.10
Mar 7 23:49:08 noktork kernel: Using $PIR table, 4 entries at 0xc00fde60
Mar 7 23:49:08 noktork kernel: acpi0: power button is handled as a fixed feature programming model.
Mar 7 23:49:08 noktork kernel: Timecounter "ACPI-safe" frequency 3579545 Hz
Mar 7 23:49:08 noktork kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
Mar 7 23:49:08 noktork kernel: acpi_cpu0: <CPU> on acpi0
Mar 7 23:49:08 noktork kernel: acpi_tz0: <thermal zone> on acpi0
Mar 7 23:49:08 noktork kernel: acpi_button0: <Power Button> on acpi0
Mar 7 23:49:08 noktork kernel: acpi_button1: <Sleep Button> on acpi0
Mar 7 23:49:08 noktork kernel: pcib0: <ACPI Host-PCI bridge> port 0x4000-0x40f7,0x5000-0x500f,0xcf8-0xcff on acpi0
Mar 7 23:49:08 noktork kernel: pci0: <ACPI PCI bus> on pcib0
Mar 7 23:49:08 noktork kernel: agp0: <Intel 82810 (i810 GMCH) SVGA controller> mem 0xd4100000-0xd417ffff,0xd0000000-0xd3ffffff irq 12 at device 1.0 on pci0
Mar 7 23:49:08 noktork kernel: pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
Mar 7 23:49:08 noktork kernel: pcib1: could not get PCI interrupt routing table for \_SB_.PCI0.HUB0 - AE_NOT_FOUND
Mar 7 23:49:08 noktork kernel: pci1: <ACPI PCI bus> on pcib1
Mar 7 23:49:08 noktork kernel: rl0: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem 0xd4000000-0xd40000ff irq 11 at device 4.0 on pci1
Mar 7 23:49:08 noktork kernel: rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
Mar 7 23:49:08 noktork kernel: rl0: Ethernet address: 00:00:21:fa:ba:27
Mar 7 23:49:08 noktork kernel: miibus0: <MII bus> on rl0
Mar 7 23:49:08 noktork kernel: rlphy0: <RealTek internal media interface> on miibus0
Mar 7 23:49:08 noktork kernel: rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Mar 7 23:49:08 noktork kernel: isab0: <PCI-ISA bridge> at device 31.0 on pci0
Mar 7 23:49:08 noktork kernel: isa0: <ISA bus> on isab0
Mar 7 23:49:08 noktork kernel: atapci0: <Intel ICH0 UDMA33 controller> port 0xf000-0xf00f at device 31.1 on pci0
Mar 7 23:49:08 noktork kernel: ata0: at 0x1f0 irq 14 on atapci0
Mar 7 23:49:08 noktork kernel: ata1: at 0x170 irq 15 on atapci0
Mar 7 23:49:08 noktork kernel: uhci0: <Intel 82801AB (ICH0) USB controller> port 0xd000-0xd01f irq 5 at device 31.2 on pci0
Mar 7 23:49:08 noktork kernel: usb0: <Intel 82801AB (ICH0) USB controller> on uhci0
Mar 7 23:49:08 noktork kernel: usb0: USB revision 1.0
Mar 7 23:49:08 noktork kernel: uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
Mar 7 23:49:08 noktork kernel: uhub0: 2 ports with 2 removable, self powered
Mar 7 23:49:08 noktork kernel: ums0: Logitech USB Receiver, rev 1.10/9.10, addr 2, iclass 3/1
Mar 7 23:49:08 noktork kernel: ums0: 5 buttons and Z dir.
Mar 7 23:49:08 noktork kernel: pci0: <multimedia, audio> at device 31.5 (no driver attached)
Mar 7 23:49:08 noktork kernel: pci0: <simple comms> at device 31.6 (no driver attached)
Mar 7 23:49:08 noktork kernel: fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
Mar 7 23:49:08 noktork kernel: fdc0: FIFO enabled, 8 bytes threshold
Mar 7 23:49:08 noktork kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
Mar 7 23:49:08 noktork kernel: sio0 port 0x3f8-0x3ff irq 4 on acpi0
Mar 7 23:49:08 noktork kernel: sio0: type 16550A
Mar 7 23:49:08 noktork kernel: ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
Mar 7 23:49:08 noktork kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
Mar 7 23:49:08 noktork kernel: ppc0: FIFO with 16/16/8 bytes threshold
Mar 7 23:49:08 noktork kernel: ppbus0: <Parallel port bus> on ppc0
Mar 7 23:49:08 noktork kernel: plip0: <PLIP network interface> on ppbus0
Mar 7 23:49:08 noktork kernel: lpt0: <Printer> on ppbus0
Mar 7 23:49:08 noktork kernel: lpt0: Interrupt-driven port
Mar 7 23:49:08 noktork kernel: ppi0: <Parallel I/O> on ppbus0
Mar 7 23:49:08 noktork kernel: atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
Mar 7 23:49:08 noktork kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
Mar 7 23:49:08 noktork kernel: kbd0 at atkbd0
Mar 7 23:49:08 noktork kernel: orm0: <Option ROMs> at iomem 0xc8000-0xcbfff,0xc0000-0xc7fff on isa0
Mar 7 23:49:08 noktork kernel: pmtimer0 on isa0
Mar 7 23:49:08 noktork kernel: sc0: <System console> at flags 0x100 on isa0
Mar 7 23:49:08 noktork kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Mar 7 23:49:08 noktork kernel: sio1: configured irq 3 not in bitmap of probed irqs 0
Mar 7 23:49:08 noktork kernel: sio1: port may not be enabled
Mar 7 23:49:08 noktork kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Mar 7 23:49:08 noktork kernel: Timecounters tick every 10.000 msec
Mar 7 23:49:08 noktork kernel: acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
Mar 7 23:49:08 noktork kernel: ad0: 14324MB <QUANTUM FIREBALLlct10 15> [29104/16/63] at ata0-master UDMA33
Mar 7 23:49:08 noktork kernel: acd0: CDROM <ATAPI 44X CDROM> at ata1-master PIO4
Mar 7 23:49:08 noktork kernel: Mounting root from ufs:/dev/ad0s1a
Mar 7 23:51:24 noktork su: walter to root on /dev/ttyp0
Mar 7 23:52:34 noktork kernel: netsmb_dev: loaded
Mar 8 12:38:53 noktork su: walter to root on /dev/ttyp0
Mar 8 15:22:14 noktork su: walter to root on /dev/ttyp0
Mar 8 15:22:17 noktork reboot: rebooted by walter
Mar 8 15:22:17 noktork syslogd: exiting on signal 15
Mar 8 15:23:21 Varver syslogd: kernel boot file is /boot/kernel/kernel
Mar 8 15:23:21 Varver kernel: Copyright (c) 1992-2003 The FreeBSD Project.
Mar 8 15:23:21 Varver kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Mar 8 15:23:21 Varver kernel: The Regents of the University of California. All rights reserved.
Mar 8 15:23:21 Varver kernel: FreeBSD 5.1-RELEASE #0: Thu Jun 5 02:55:42 GMT 2003
Mar 8 15:23:21 Varver kernel: root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Mar 8 15:23:21 Varver kernel: Preloaded elf kernel "/boot/kernel/kernel" at 0xc06d4000.
Mar 8 15:23:21 Varver kernel: Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06d41f4.
Mar 8 15:23:21 Varver kernel: Timecounter "i8254" frequency 1193182 Hz
Mar 8 15:23:21 Varver kernel: Timecounter "TSC" frequency 434320869 Hz
Mar 8 15:23:21 Varver kernel: CPU: Pentium II/Pentium II Xeon/Celeron (434.32-MHz 686-class CPU)
Mar 8 15:23:21 Varver kernel: Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Mar 8 15:23:21 Varver kernel: Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
Mar 8 15:23:21 Varver kernel: real memory = 267321344 (254 MB)
Mar 8 15:23:21 Varver kernel: avail memory = 252272640 (240 MB)
Mar 8 15:23:21 Varver kernel: Pentium Pro MTRR support enabled
Mar 8 15:23:21 Varver kernel: npx0: <math processor> on motherboard
Mar 8 15:23:21 Varver kernel: npx0: INT 16 interface
Mar 8 15:23:21 Varver kernel: acpi0: <FIC CW33 > on motherboard
Mar 8 15:23:21 Varver kernel: pcibios: BIOS version 2.10
Mar 8 15:23:21 Varver kernel: Using $PIR table, 4 entries at 0xc00fde60
Mar 8 15:23:21 Varver kernel: acpi0: power button is handled as a fixed feature programming model.
Mar 8 15:23:21 Varver kernel: Timecounter "ACPI-fast" frequency 3579545 Hz
Mar 8 15:23:21 Varver kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
Mar 8 15:23:21 Varver kernel: acpi_cpu0: <CPU> on acpi0
Mar 8 15:23:21 Varver kernel: acpi_tz0: <thermal zone> on acpi0
Mar 8 15:23:21 Varver kernel: acpi_button0: <Power Button> on acpi0
Mar 8 15:23:21 Varver kernel: acpi_button1: <Sleep Button> on acpi0
Mar 8 15:23:21 Varver kernel: pcib0: <ACPI Host-PCI bridge> port 0x4000-0x40f7,0x5000-0x500f,0xcf8-0xcff on acpi0
Mar 8 15:23:21 Varver kernel: pci0: <ACPI PCI bus> on pcib0
Mar 8 15:23:21 Varver kernel: agp0: <Intel 82810 (i810 GMCH) SVGA controller> mem 0xd4100000-0xd417ffff,0xd0000000-0xd3ffffff irq 12 at device 1.0 on pci0
Mar 8 15:23:21 Varver kernel: pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
Mar 8 15:23:21 Varver kernel: pcib1: could not get PCI interrupt routing table for \_SB_.PCI0.HUB0 - AE_NOT_FOUND
Mar 8 15:23:21 Varver kernel: pci1: <ACPI PCI bus> on pcib1
Mar 8 15:23:21 Varver kernel: rl0: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem 0xd4000000-0xd40000ff irq 11 at device 4.0 on pci1
Mar 8 15:23:21 Varver kernel: rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
Mar 8 15:23:21 Varver kernel: rl0: Ethernet address: 00:00:21:fa:ba:27
Mar 8 15:23:21 Varver kernel: miibus0: <MII bus> on rl0
Mar 8 15:23:21 Varver kernel: rlphy0: <RealTek internal media interface> on miibus0
Mar 8 15:23:21 Varver kernel: rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Mar 8 15:23:21 Varver kernel: isab0: <PCI-ISA bridge> at device 31.0 on pci0
Mar 8 15:23:21 Varver kernel: isa0: <ISA bus> on isab0
Mar 8 15:23:21 Varver kernel: atapci0: <Intel ICH0 UDMA33 controller> port 0xf000-0xf00f at device 31.1 on pci0
Mar 8 15:23:21 Varver kernel: ata0: at 0x1f0 irq 14 on atapci0
Mar 8 15:23:21 Varver kernel: ata1: at 0x170 irq 15 on atapci0
Mar 8 15:23:21 Varver kernel: uhci0: <Intel 82801AB (ICH0) USB controller> port 0xd000-0xd01f irq 5 at device 31.2 on pci0
Mar 8 15:23:21 Varver kernel: usb0: <Intel 82801AB (ICH0) USB controller> on uhci0
Mar 8 15:23:21 Varver kernel: usb0: USB revision 1.0
Mar 8 15:23:21 Varver kernel: uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
Mar 8 15:23:21 Varver kernel: uhub0: 2 ports with 2 removable, self powered
Mar 8 15:23:21 Varver kernel: ums0: Logitech USB Receiver, rev 1.10/9.10, addr 2, iclass 3/1
Mar 8 15:23:21 Varver kernel: ums0: 5 buttons and Z dir.
Mar 8 15:23:21 Varver kernel: pci0: <multimedia, audio> at device 31.5 (no driver attached)
Mar 8 15:23:21 Varver kernel: pci0: <simple comms> at device 31.6 (no driver attached)
Mar 8 15:23:21 Varver kernel: fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
Mar 8 15:23:21 Varver kernel: fdc0: FIFO enabled, 8 bytes threshold
Mar 8 15:23:21 Varver kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
Mar 8 15:23:21 Varver kernel: sio0 port 0x3f8-0x3ff irq 4 on acpi0
Mar 8 15:23:21 Varver kernel: sio0: type 16550A
Mar 8 15:23:21 Varver kernel: ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
Mar 8 15:23:21 Varver kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
Mar 8 15:23:21 Varver kernel: ppc0: FIFO with 16/16/8 bytes threshold
Mar 8 15:23:21 Varver kernel: ppbus0: <Parallel port bus> on ppc0
Mar 8 15:23:21 Varver kernel: plip0: <PLIP network interface> on ppbus0
Mar 8 15:23:21 Varver kernel: lpt0: <Printer> on ppbus0
Mar 8 15:23:21 Varver kernel: lpt0: Interrupt-driven port
Mar 8 15:23:21 Varver kernel: ppi0: <Parallel I/O> on ppbus0
Mar 8 15:23:21 Varver kernel: atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
Mar 8 15:23:21 Varver kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
Mar 8 15:23:21 Varver kernel: kbd0 at atkbd0
Mar 8 15:23:21 Varver kernel: orm0: <Option ROMs> at iomem 0xc8000-0xcbfff,0xc0000-0xc7fff on isa0
Mar 8 15:23:21 Varver kernel: pmtimer0 on isa0
Mar 8 15:23:21 Varver kernel: sc0: <System console> at flags 0x100 on isa0
Mar 8 15:23:21 Varver kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Mar 8 15:23:21 Varver kernel: sio1: configured irq 3 not in bitmap of probed irqs 0
Mar 8 15:23:21 Varver kernel: sio1: port may not be enabled
Mar 8 15:23:21 Varver kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Mar 8 15:23:21 Varver kernel: Timecounters tick every 10.000 msec
Mar 8 15:23:21 Varver kernel: acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
Mar 8 15:23:21 Varver kernel: ad0: 14324MB <QUANTUM FIREBALLlct10 15> [29104/16/63] at ata0-master UDMA33
Mar 8 15:23:21 Varver kernel: acd0: CDROM <ATAPI 44X CDROM> at ata1-master PIO4
Mar 8 15:23:21 Varver kernel: Mounting root from ufs:/dev/ad0s1a
Mar 8 19:30:39 Varver su: walter to root on /dev/ttyp0
Mar 8 23:07:15 Varver su: walter to root on /dev/ttyp0
Mar 9 09:16:02 Varver su: walter to root on /dev/ttyp0
Mar 9 10:17:39 Varver su: walter to root on /dev/ttyp1
Mar 9 10:47:59 Varver su: walter to root on /dev/ttyp1
Mar 9 11:07:57 Varver su: walter to root on /dev/ttyp1
Mar 9 14:15:50 Varver su: walter to root on /dev/ttyp1
Mar 9 14:39:21 Varver kernel: netsmb_dev: loaded
Mar 9 14:42:07 Varver su: walter to root on /dev/ttyp0
Mar 9 16:00:23 Varver su: BAD SU walter to root on /dev/ttyp0
Mar 9 16:00:30 Varver su: walter to root on /dev/ttyp0
Mar 9 19:04:40 Varver login: 2 LOGIN FAILURES ON ttyv0
Mar 9 19:05:09 Varver su: walter to root on /dev/ttyv0
Mar 10 08:52:54 Varver su: walter to root on /dev/ttyp0
Mar 10 12:42:06 Varver su: walter to root on /dev/ttyp0
Mar 10 12:43:27 Varver su: walter to root on /dev/ttyp0
Mar 10 12:53:26 Varver su: walter to root on /dev/ttyp0
Mar 10 15:04:55 Varver su: walter to root on /dev/ttyp0
Mar 10 16:55:24 Varver su: walter to root on /dev/ttyp0
Mar 10 23:23:28 Varver su: walter to root on /dev/ttyp0
------=____1078960218318_vZ'_EE)0V8
Content-Type: text/plain;
name="XFree_install.txt"
Content-Disposition: inline;
filename="XFree_install.txt"
This is a meta-port, meaning that it just depends on its subparts of the port.
It won't build and install all the parts until you have typed make install
This port does not ensure things are upgraded; use portupgrade if you want to
upgrade XFree86. If you simply type 'make install' it may use over 2GB to build
all of the subports. You can install the ports singly if you are low on space.
===> Vulnerability check disabled
===> Extracting for XFree86-4.3.0,1
===> Patching for XFree86-4.3.0,1
===> XFree86-4.3.0,1 depends on shared library: X11.6 - not found
===> Verifying install for X11.6 in /usr/ports/x11/XFree86-4-libraries
===> Vulnerability check disabled
===> Extracting for XFree86-libraries-4.3.0_6
>> Checksum OK for xc/X430src-1.tgz.
>> Checksum OK for xc/X430src-2.tgz.
>> Checksum OK for xc/X430src-3.tgz.
>> Checksum OK for xc/Wraphelp2.gz.
/usr/bin/gunzip -f -c /usr/ports/distfiles/xc/Wraphelp2.gz > /usr/ports/x11/XFree86-4-libraries/work/xc/lib/Xdmcp/Wraphelp.c
===> Patching for XFree86-libraries-4.3.0_6
===> Applying FreeBSD patches for XFree86-libraries-4.3.0_6
/bin/cp /usr/ports/x11/XFree86-4-libraries/files/nls::Compose::microsoft-cp1251 /usr/ports/x11/XFree86-4-libraries/work/xc/nls/Compose/microsoft-cp1251
===> XFree86-libraries-4.3.0_6 depends on file: /usr/X11R6/lib/X11/config/date.def - found
===> XFree86-libraries-4.3.0_6 depends on shared library: freetype.9 - found
===> XFree86-libraries-4.3.0_6 depends on shared library: fontconfig.1 - found
===> Configuring for XFree86-libraries-4.3.0_6
cd ./config/imake && make -D INSTALLS_DEPENDS -f Makefile.ini BOOTSTRAPCFLAGS="" CC="cc"
making imake with BOOTSTRAPCFLAGS= and CROSSCOMPILEFLAGS=-DCROSSCOMPILEDIR="" in config/imake
cc -o ccimake -DCROSSCOMPILEDIR=\"\" -O -I../../include -I../../imports/x11/include/X11 ccimake.c
if [ -n "" ] ; then /cc -E `./ccimake` -DCROSSCOMPILE_CPP imakemdep.h > imakemdep_cpp.h; else touch imakemdep_cpp.h; fi
cc -c -O -I../../include -I../../imports/x11/include/X11 `./ccimake` imake.c
cc -o imake -O -I../../include -I../../imports/x11/include/X11 imake.o
rm -f ./config/makedepend/Makefile.proto
./config/imake/imake -I./config/cf -s ./config/makedepend/Makefile.proto -f ./config/makedepend/Imakefile -DTOPDIR=../.. -DCURDIR=./config/makedepend
cd ./config/makedepend && rm -f -r Makefile Makefile.dep makedepend *.o bootstrap
cd ./config/makedepend && make -f Makefile.proto bootstrap
./config/imake/imake -I./config/cf -s ./config/imake/Makefile.proto -f ./config/imake/Imakefile -DTOPDIR=../.. -DCURDIR=./config/imake -DBootStrap
cd ./config/imake && make -f Makefile.proto bootstrapdepend
cd ./config/imake && make -D INSTALLS_DEPENDS -f Makefile.ini BOOTSTRAPCFLAGS="" CC="cc" bootstrap
mv *.o bootstrap
cd ./config/imake && make -f Makefile.proto all
cc -O -pipe -mcpu=pentiumpro -ansi -Dasm=__asm -Wno-system-headers -Wall -Wpointer-arith -Wundef -I../../include -I../../exports/include/X11 -I../.. -I../../exports/include -DCSRG_BASED -DFUNCPROTO=15 -DNARROWPROTO -DCPP_PROGRAM="\"/usr/bin/cpp\"" -DHAS_MERGE_CONSTANTS=`if cc -fmerge-constants -xc /dev/null -S -o /dev/null 2> /dev/null 1> /dev/null; then echo 1; else echo 0; fi` -c imake.c
rm -f imake
cc -o imake -O -pipe -mcpu=pentiumpro -ansi -Dasm=__asm -Wno-system-headers -Wall -Wpointer-arith -Wundef imake.o -L/usr/X11R6/lib -Wl,-rpath,/usr/X11R6/lib
rm -f imake._man
/usr/bin/cpp -undef -traditional -D__apploaddir__=/usr/X11R6/lib/X11/app-defaults -D__filemansuffix__=5 -D__libmansuffix__=3 -D__miscmansuffix__=7 -D__drivermansuffix__=4 -D__projectroot__=/usr/X11R6 -D__xorgversion__='"Release 6.6" "X Version 11"' -D__vendorversion__="`echo 4 3 0 | sed -e 's/ /./g' -e 's/^/Version /'` XFree86" -D__cpp__=/usr/bin/cpp <imake.man | sed -e '/^# *[0-9][0-9]* *.*$/d' -e '/^XCOMM$/s//#/' -e '/^XCOMM[^a-zA-Z0-9_]/s/^XCOMM/#/' >imake._man
make -D INSTALLS_DEPENDS xmakefile
rm -f xmakefile
./config/imake/imake -I./config/cf -s xmakefile -DTOPDIR=. -DCURDIR=.
rm -f ./config/imake/Makefile.proto
making Makefiles in include/bitmaps...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/include.
making Makefiles in include/extensions...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/include.
making Makefiles in include/fonts...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/include.
making Makefiles in include/GL...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/include.
making Makefiles in include/DPS...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/include.
making Makefiles in lib/xtrans...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/Xau...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/Xdmcp...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/X11...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/oldX...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/ICE...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/SM...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/Xext...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/Xt...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/Xss...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/Xxf86misc...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/Xxf86vm...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/Xxf86dga...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/Xmu...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/Xmuu...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/Xpm...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/Xaw6...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/Xaw...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/Xi...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/Xtst...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/FS...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/xkbfile...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/xkbui...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/lbxutil...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/Xp...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/Xv...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/GL...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/GLU...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/GLw...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/dps...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/dpstk...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/psres...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/Xinerama...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/Xrender...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/XvMC...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/Xrandr...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/XTrap...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/XRes...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/Xcursor...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/font...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/fontenc...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in lib/Xfontcache...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/lib.
making Makefiles in nls/XLC_LOCALE...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/nls.
making Makefiles in nls/Compose...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/nls.
making Makefiles in nls/XI18N_OBJS...
*** Error code 127
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/nls.
including in include/bitmaps...
*** Error code 2
Stop in /usr/ports/x11/XFree86-4-libraries/work/xc/include.
*** Error code 1
Stop in /usr/ports/x11/XFree86-4-libraries.
*** Error code 1
Stop in /usr/ports/x11/XFree86-4.
------=____1078960218318_vZ'_EE)0V8--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040310231018.UNRW28932.amsfep14-int.chello.nl>