Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 12 Feb 1997 18:18:07 -0600
From:      Justen Stepka <raistlin@eecpnet.com>
To:        "'John-Mark Gurney'" <gurney_j@resnet.uoregon.edu>, Leonard Chua <lenc@earth.infinetconsulting.com>
Cc:        "freebsd-bugs@freebsd.org" <freebsd-bugs@freebsd.org>
Subject:   RE: moused and X11R6
Message-ID:  <01BC1911.1A1A4940@bullfrog.ecpnet.com>

next in thread | raw e-mail | index | archive | help
This is a nice idea but the problem is that it doesn't work! :( When I use this setup the mouse will thrust towards the upper left of the screen and move along the top when I try and control the mouse.

Justen Stepka
raistlin@ecpnet.com

-----Original Message-----
From:	John-Mark Gurney [SMTP:jmg@nike.efn.org]
Sent:	Wednesday, February 12, 1997 3:31 PM
To:	Leonard Chua
Cc:	freebsd-bugs@freebsd.org
Subject:	Re: moused and X11R6

On Wed, 12 Feb 1997, Leonard Chua wrote:

> Hmm...But I don't have a mousesystems mouse.(microsoft/mouseman is mine)
> I've tried to get /dev/sysmouse to work (which I assume is for 
> mousesystems mice), with no luck so far.
> IMHO, I'd much rather configure XF86Config to use /dev/mouse directly. and
> let moused go sleep then.

ok.. basicly /dev/sysmouse is a service that is provided by moused to
allow "sharing" of the mouse between itself and X (or other programs)... 
you use Mousesystem protocol with /dev/sysmouse because moused "emulates"
a Mousesystem mouse on /dev/sysmouse...

it basicly converts your microsoft/mouseman mouse into the Mousesystem
protocol on /dev/sysmouse...

does this help?

basicly you configure moused properly to use /dev/mouse (or what ever the
device for your mouse is)...  then you configure X to use /dev/sysmouse
and protcol Mousesystems...  when X open /dev/sysmouse moused will convert
the data coming in from your mouse to the MouseSystems protcol for use w/
X...

ttyl..

John-Mark

gurney_j@efn.org
http://resnet.uoregon.edu/~gurney_j/
Modem/FAX: (541) 683-6954   (FreeBSD Box)

Live in Peace, destroy Micro$oft, support free software, run FreeBSD (unix)





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?01BC1911.1A1A4940>