Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 27 Jan 2010 14:29:38 -0500
From:      Mike Tancsa <mike@sentex.net>
To:        freebsd-current@freebsd.org
Cc:        Jack Vogel <jfvogel@gmail.com>
Subject:   new em problems on HEAD
Message-ID:  <201001271929.o0RJTVbB053140@lava.sentex.ca>

next in thread | raw e-mail | index | archive | help

Not sure if the panic is related, but the watchdog timeout issue on 
bootup seems to be repeatable on this motherboard with HEAD from last 
Friday.  It boots up fine under 6.x


FreeBSD 9.0-CURRENT #1: Fri Jan 22 16:43:53 EST 2010
     mdtancsa@ich10.sentex.ca:/usr/HEAD/obj/usr/HEAD/src/sys/alix i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R)  CPU       E6500  @ 2.93GHz (0.00-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0x1067a  Stepping = 10
   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
   Features2=0x400e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE>
   AMD Features=0x20100000<NX,LM>
   AMD Features2=0x1<LAHF>
   TSC: P-state invariant
real memory  = 2147483648 (2048 MB)
avail memory = 2089807872 (1992 MB)
ACPI APIC Table: <PTLTD          APIC  >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <PTLTD   RSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci9: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci9
pci10: <ACPI PCI bus> on pcib3
pci10: <mass storage, RAID> at device 1.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci13: <ACPI PCI bus> on pcib4
em0: <Intel(R) PRO/1000 Network Connection 6.9.24> port 0x5000-0x501f 
mem 0xe1000000-0xe101ffff irq 16 at device 0.0 on pci13
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:30:48:8d:2a:96
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci14: <ACPI PCI bus> on pcib5
em1: <Intel(R) PRO/1000 Network Connection 6.9.24> port 0x6000-0x601f 
mem 0xe1100000-0xe111ffff irq 17 at device 0.0 on pci14
em1: Using MSI interrupt
em1: [FILTER]
em1: Ethernet address: 00:30:48:8d:2a:97
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x3000-0x301f 
irq 23 at device 29.0 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x3020-0x303f 
irq 19 at device 29.1 on pci0
uhci1: [ITHREAD]
usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x3040-0x305f 
irq 18 at device 29.2 on pci0
uhci2: [ITHREAD]
usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x3060-0x307f 
irq 16 at device 29.3 on pci0
uhci3: [ITHREAD]
usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 
0xe0000000-0xe00003ff irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci15: <ACPI PCI bus> on pcib6
vgapci0: <VGA-compatible display> port 0x7000-0x70ff mem 
0xe8000000-0xefffffff,0xe1200000-0xe120ffff irq 16 at device 0.0 on pci15
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30a0-0x30af at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6160b2506000616
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6160b2506000616
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 
0xc0000-0xcafff,0xcb000-0xcbfff,0xcc000-0xccfff,0xcd000-0xcdfff pnpid 
ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
SMP: AP CPU #1 Launched!
ugen0.1: <Intel> at usbus0
ugen1.1: <Intel> at usbus1
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0
ugen2.1: <Intel> at usbus2
ugen3.1: <Intel> at usbus3
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
Root mount waiting for: usbus4
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Trying to mount root from nfs:
NFS ROOT: 10.255.255.1:/usr/home/pxe9/
em0: Watchdog timeout -- resetting
em0: link state changed to UP
Interface em0 IP-Address 10.255.255.118 Broadcast 10.255.255.255
mount_nfs: can't update /var/db/mounttab for 10.255.255.1:/usr/home/pxe9//etc
kernel trap 18 with interrupts disabled


Fatal trap 18: integer divide fault while in kernel mode
cpuid = 1; apic id = 01
instruction pointer     = 0x20:0xc0995f0b
stack pointer           = 0x28:0xc4e746f8
frame pointer           = 0x28:0xc4e7476c
code segment            = base 0x0, limit 0xfffff, type 0x1b
                         = DPL 0, pres 1, def32 1, gran 1
processor eflags        = resume, IOPL = 0
current process         = 52 (ps)
trap number             = 18
panic: integer divide fault
cpuid = 1
Uptime: 1m23s
Cannot dump. Device not defined or unavailable.
Automatic reboot in 15 seconds - press a key on the console to abort

Fatal double fault:
eip = 0xc098e8d0
esp = 0xc4d00000
ebp = 0xc4d00020
cpuid = 1; Rebooting...
apic id = 01
cpu_reset: Stopping other CPUs
panic: double fault
cpuid = 1
Uptime: 1m23s
Cannot dump. Device not defined or unavailable.
Automatic reboot in 15 seconds - press a key on the console to abort
Rebooting...
cpu_reset: Stopping other CPUs


--------------------------------------------------------------------
Mike Tancsa,                                      tel +1 519 651 3400
Sentex Communications,                            mike@sentex.net
Providing Internet since 1994                    www.sentex.net
Cambridge, Ontario Canada                         www.sentex.net/mike




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201001271929.o0RJTVbB053140>