Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 8 Feb 2003 09:24:25 -0800
From:      "Remington L." <madriax@garlic.com>
To:        <freebsd-mobile@freebsd.org>, <freebsd-questions@freebsd.org>
Message-ID:  <000001c2cf96$f39caa90$0100a8c0@SHMOOPIE>

next in thread | raw e-mail | index | archive | help
i have a Sony VAIO GRX570 running FreeBSD 5.0-RELEASE and my mouse
doesnt work
I'm in a complete daze as to why it's not working. The only information
i can provide is i DO have "device psm" in my kernel, and default
device.hints. Any help would be greatly appreciated!
I have included a copy of dmesg, I hope this helps

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights
reserved.
FreeBSD 5.0-RELEASE #0: Sun Feb  2 02:33:22 PST 2003
    root@:/usr/obj/usr/src/sys/GATE1
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06aa000.
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (501.14-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x665  Stepping = 5
 
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,
MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 268435456 (256 MB)
avail memory = 253607936 (241 MB)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
IOAPIC #0 intpin 16 -> irq 5
IOAPIC #0 intpin 18 -> irq 11
IOAPIC #0 intpin 19 -> irq 10
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): apic id:  0, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
VESA: v3.0, 65536k memory, flags:0x1, mode table:0xc05e87a2 (1000022)
VESA: NVidia
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using $PIR table, 8 entries at 0xc00fdef0
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on
motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem
0xe8000000-0xebffffff at device 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xa000-0xa01f irq
10 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Timecounter "PIIX"  frequency 3579545 Hz
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pcm0: <Creative EMU10K1> port 0xa400-0xa41f irq 10 at device 9.0 on pci0
rl0: <RealTek 8139 10/100BaseTX> port 0xac00-0xacff mem
0xef000000-0xef0000ff irq 11 at device 11.0 on pci0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect
mode
rl0: Ethernet address: 00:40:f4:49:88:0e
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci1: <HighPoint HPT366 ATA66 controller> port
0xb800-0xb8ff,0xb400-0xb403,0xb000-0xb007 irq 11 at device 19.0 on pci0
ata2: at 0xb000 on atapci1
atapci2: <HighPoint HPT366 ATA66 controller> port
0xc400-0xc4ff,0xc000-0xc003,0xbc00-0xbc07 irq 11 at device 19.1 on pci0
ata3: at 0xbc00 on atapci2
orm0: <Option ROMs> at iomem 0xcc000-0xcffff,0xc0000-0xcb7ff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0a03> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Timecounters tick every 10.000 msec
ad0: 6149MB <QUANTUM FIREBALL SE6.4A> [13328/15/63] at ata0-master
UDMA33
acd0: CD-RW <LITE-ON LTR-24102B> at ata1-master PIO4
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ad0s1a




To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000001c2cf96$f39caa90$0100a8c0>