Date: Tue, 13 Sep 2005 14:30:43 +0200 From: Niels Heinen <niels@FreeBSD.org> To: freebsd-mobile@freebsd.org Subject: Re: Toshiba ToPIC95B not working on 6.0-BETA4 Message-ID: <20050913123042.GA52309@r0ck.mine.nu> In-Reply-To: <20050913095341.GA52017@r0ck.mine.nu> References: <20050913095341.GA52017@r0ck.mine.nu>
next in thread | previous in thread | raw e-mail | index | archive | help
--nFreZHaLTZJo0R7j Content-Type: text/plain; charset=unknown-8bit Content-Disposition: inline Content-Transfer-Encoding: 8bit Already replying to my own mail.. sorry.. Attached some more debug info that might give someone a clue.. Cheers, Niels On Tue, Sep 13, 2005 at 11:53:42AM +0200, Niels Heinen wrote: > > Hi all, > > I recently received a Toshiba 460CDT and am trying to get > the most out of it. Its an old device but should still be > usable. Unfortunately I can't get PCMCIA to work. > > In the BIOS you can configure the 'PC Card controller mode'. When I > set it to PCIC compatible, I see nothing in the dmesg. When I set > it to CardBus/16-but I see that the slots are detected. > > However, whenever I insert a PCMCIA device, like my Prims/2 based > NIC, which works fine in my other FreeBSD devices, I get: > > CIS is too long -- truncating > pccard0: Card has no functions! > cbb0: PC Card card activation failed > > This must be a bug.. maybe its in the Toshiba ToPIC95B support ? > > I attached the following files: > > cardbus-pciconf.txt pciconf while using CardBus/16-but > dmesg-cardbus.txt dmesg while using CardBus/16-but > dmesg-pcic.txt dmesg while using PCIC compatibile mode > > Any help is appriciated ! ;-) > > Niels > > hostb0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x06011179 rev=0xa7 hdr=0x00 > vendor = 'Toshiba America Information Systems' > device = 'Pentium Host Bridge for Notebooks' > class = bridge > subclass = HOST-PCI > cbb0@pci0:2:0: class=0x060700 card=0x00000000 chip=0x060a1179 rev=0x07 hdr=0x02 > vendor = 'Toshiba America Information Systems' > device = 'ToPIC95B Toshiba ToPIC95 CardBus Controller' > class = bridge > subclass = PCI-CardBus > cbb1@pci0:2:1: class=0x060700 card=0x00000000 chip=0x060a1179 rev=0x07 hdr=0x02 > vendor = 'Toshiba America Information Systems' > device = 'ToPIC95B Toshiba ToPIC95 CardBus Controller' > class = bridge > subclass = PCI-CardBus > none0@pci0:4:0: class=0x030000 card=0x00000000 chip=0x00e4102c rev=0xc2 hdr=0x00 > vendor = 'Asiliant (Chips And Technologies)' > device = '65554 Flat Panel/LCD CRT GUI Accelerator' > class = display > subclass = VGA > ohci0@pci0:11:0: class=0x0c0310 card=0x00000000 chip=0x00351033 rev=0x01 hdr=0x00 > vendor = 'NEC Electronics Hong Kong' > device = 'uPD9210FGC-7EA / µPD720101 USB 1.0 Host Controller (OHCI compliant)' > class = serial bus > subclass = USB > Copyright (c) 1992-2005 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 6.0-BETA4 #1: Mon Nov 18 06:32:17 CET 2002 > root@:/usr/src/sys/i386/compile/TOSHI > Preloaded elf kernel "/boot/kernel/kernel" at 0xc085f000. > Calibrating clock(s) ... i8254 clock: 1193106 Hz > CLK_USE_I8254_CALIBRATION not specified - using default frequency > Timecounter "i8254" frequency 1193182 Hz quality 0 > Calibrating TSC clock ... TSC clock: 165790095 Hz > CPU: Pentium/P55C (165.79-MHz 586-class CPU) > Origin = "GenuineIntel" Id = 0x543 Stepping = 3 > Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> > real memory = 33685504 (32 MB) > Physical memory chunk(s): > 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) > 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) > 0x0000000000c25000 - 0x0000000001f56fff, 20127744 bytes (4914 pages) > avail memory = 23515136 (22 MB) > bios32: Found BIOS32 Service Directory header at 0xc00f8e20 > bios32: Entry = 0xfe95b (c00fe95b) Rev = 0 Len = 1 > pcibios: PCI BIOS entry at 0xf0000+0xdcf1 > pnpbios: Found PnP BIOS data at 0xc00f8e30 > pnpbios: Entry = f0000:9c9f Rev = 1.0 > pnpbios: Event flag at 510 > pnpbios: OEM ID 2932f351 > Other BIOS signatures found: > Intel Pentium detected, installing workaround for F00F bug > wlan: <802.11 Link Layer> > mem: <memory> > nfslock: pseudo-device > null: <null device, zero device> > io: <I/O> > random: <entropy source, Software, Yarrow> > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > cpu0 on motherboard > pci_open(1): mode 1 addr port (0x0cf8) is 0x80001850 > pci_open(1a): mode1res=0x80000000 (0x80000000) > pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06011179) > pcibios: BIOS version 2.10 > Found $PIR table, 3 entries at 0xc00f97e0 > PCI-Only Interrupts: none > Location Bus Device Pin Link IRQs > embedded 0 11 A 0x01 3 4 5 6 7 9 10 11 12 14 15 > embedded 0 2 A 0x01 3 4 5 6 7 9 10 11 12 14 15 > embedded 0 2 B 0x01 3 4 5 6 7 9 10 11 12 14 15 > slot 1 0 6 A 0x01 3 4 5 6 7 9 10 11 12 14 15 > slot 1 0 6 B 0x01 3 4 5 6 7 9 10 11 12 14 15 > pcib0: <Host to PCI bridge> pcibus 0 on motherboard > pir0: <PCI Interrupt Routing Table: 3 Entries> on motherboard > $PIR: Links after initial probe: > Link IRQ Rtd Ref IRQs > 0x1 255 N 5 3 4 5 6 7 9 10 11 12 14 15 > $PIR: Found matching pin for 0.11.INTA at func 0: 11 > $PIR: Found matching pin for 0.2.INTA at func 0: 11 > $PIR: Found matching pin for 0.2.INTB at func 1: 11 > $PIR: Links after initial IRQ discovery: > Link IRQ Rtd Ref IRQs > 0x1 11 Y 5 3 4 5 6 7 9 10 11 12 14 15 > $PIR: IRQs used by BIOS: 11 > $PIR: Interrupt Weights: > [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ] > [ 0 0 0 0 0 0 0 0 0 0 0 5 0 0 0 0 ] > pci0: <PCI bus> on pcib0 > pci0: physical bus=0 > found-> vendor=0x1179, dev=0x0601, revid=0xa7 > bus=0, slot=0, func=0 > class=06-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x2280, cachelnsz=8 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1179, dev=0x060a, revid=0x07 > bus=0, slot=2, func=0 > class=06-07-00, hdrtype=0x02, mfdev=1 > cmdreg=0x0004, statreg=0x0480, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > map[10]: type 1, range 32, base 00000000, size 12, memory disabled > $PIR: 0:2 INTA routed to irq 11 > found-> vendor=0x1179, dev=0x060a, revid=0x07 > bus=0, slot=2, func=1 > class=06-07-00, hdrtype=0x02, mfdev=1 > cmdreg=0x0004, statreg=0x0480, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=b, irq=11 > map[10]: type 1, range 32, base 00000000, size 12, memory disabled > $PIR: 0:2 INTB routed to irq 11 > found-> vendor=0x102c, dev=0x00e4, revid=0xc2 > bus=0, slot=4, func=0 > class=03-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0083, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > map[10]: type 1, range 32, base fe000000, size 24, enabled > found-> vendor=0x1033, dev=0x0035, revid=0x01 > bus=0, slot=11, func=0 > class=0c-03-10, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0a00, cachelnsz=0 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x15 (5250 ns) > intpin=a, irq=11 > map[10]: type 1, range 32, base fdfff000, size 12, enabled > $PIR: 0:11 INTA routed to irq 11 > cbb0: <ToPIC95B PCI-CardBus Bridge> irq 11 at device 2.0 on pci0 > cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000 > pccard0: <16-bit PCCard bus> on cbb0 > cbb0: [MPSAFE] > cbb0: PCI Configuration space: > 0x00: 0x060a1179 0x04800007 0x06070007 0x00820000 > 0x10: 0x80000000 0x04800000 0x00141400 0xfffff000 > 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc > 0x30: 0x00000000 0x0000fffc 0x00000000 0x0400010b > 0x40: 0x00000000 0x00000000 0x00000000 0x00000000 > 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 > 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 > 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 > 0x80: 0x00000000 0x00000000 0x00000002 0x00000000 > 0x90: 0x00000001 0x00000000 0x00000000 0x00000000 > 0xa0: 0x86001cf0 0x00000002 0x00000000 0x0000fd80 > 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 > 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 > 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 > 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 > 0xf0: 0x00000000 0x00000000 0x00000000 0x00000008 > cbb1: <ToPIC95B PCI-CardBus Bridge> irq 11 at device 2.1 on pci0 > cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80001000 > pccard1: <16-bit PCCard bus> on cbb1 > cbb1: [MPSAFE] > cbb1: PCI Configuration space: > 0x00: 0x060a1179 0x04800007 0x06070007 0x00820000 > 0x10: 0x80001000 0x04800000 0x00151500 0xfffff000 > 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc > 0x30: 0x00000000 0x0000fffc 0x00000000 0x0400020b > 0x40: 0x00000000 0x00000000 0x00000000 0x00000000 > 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 > 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 > 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 > 0x80: 0x00000000 0x00000000 0x00000002 0x00000000 > 0x90: 0x00000001 0x00000000 0x00000000 0x00000000 > 0xa0: 0x86002cf0 0x00000002 0x00000000 0x0000fd80 > 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 > 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 > 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 > 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 > 0xf0: 0x00000000 0x00000000 0x00000000 0x00000008 > pci0: <display, VGA> at device 4.0 (no driver attached) > ohci0: <NEC uPD 9210 USB controller> mem 0xfdfff000-0xfdffffff irq 11 at device 11.0 on pci0 > ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfdfff000 > ohci0: [GIANT-LOCKED] > usb0: OHCI version 1.0 > usb0: <NEC uPD 9210 USB controller> on ohci0 > usb0: USB revision 1.0 > uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > isa0: <ISA bus> on motherboard > ex_isa_identify() > pnp_identify: Trying Read_Port at 203 > pnp_identify: Trying Read_Port at 243 > pnp_identify: Trying Read_Port at 283 > pnp_identify: Trying Read_Port at 2c3 > pnp_identify: Trying Read_Port at 303 > pnp_identify: Trying Read_Port at 343 > pnp_identify: Trying Read_Port at 383 > pnp_identify: Trying Read_Port at 3c3 > PNP Identify complete > pnpbios: 18 devices, largest 192 bytes > PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 > PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000 > PNP0c01: adding fixed memory32 range 0x100000-0x201ffff, size=0x1f20000 > PNP0c01: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000 > pnpbios: handle 1 device ID PNP0c01 (010cd041) > PNP0200: adding io range 0-0xf, size=0x10, align=0x1 > PNP0200: adding io range 0x81-0x83, size=0x3, align=0x1 > PNP0200: adding io range 0x87-0x87, size=0x1, align=0x1 > PNP0200: adding io range 0x89-0x8b, size=0x3, align=0x1 > PNP0200: adding io range 0x8f-0x8f, size=0x1, align=0x1 > PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1 > PNP0200: adding dma mask 0x10 > pnpbios: handle 2 device ID PNP0200 (0002d041) > PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1 > PNP0100: adding irq mask 0x1 > pnpbios: handle 4 device ID PNP0100 (0001d041) > PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 > pnpbios: handle 5 device ID PNP0800 (0008d041) > PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1 > PNP0c04: adding irq mask 0x2000 > pnpbios: handle 6 device ID PNP0c04 (040cd041) > PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1 > PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1 > PNP0303: adding irq mask 0x2 > pnpbios: handle 7 device ID PNP0303 (0303d041) > TOS7400: adding irq mask 0x1000 > pnpbios: handle 8 device ID TOS7400 (0074f351) > PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1 > PNP0b00: adding irq mask 0x100 > pnpbios: handle 9 device ID PNP0b00 (000bd041) > PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1 > PNP0c02: adding io range 0x84-0x86, size=0x3, align=0x1 > PNP0c02: adding io range 0x88-0x88, size=0x1, align=0x1 > PNP0c02: adding io range 0x8c-0x8e, size=0x3, align=0x1 > PNP0c02: adding io range 0xe0-0xef, size=0x10, align=0x1 > PNP0c02: adding io range 0xb0-0xb2, size=0x3, align=0x1 > PNP0c02: adding io range 0x24-0x25, size=0x2, align=0x1 > PNP0c02: adding io range 0x2e-0x2f, size=0x2, align=0x1 > PNP0c02: adding io range 0x1882-0x1885, size=0x4, align=0x1 > PNP0c02: adding io range 0x1888-0x188d, size=0x6, align=0x1 > PNP0c02: adding io range 0x480-0x48f, size=0x10, align=0x1 > PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0x1 > PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1 > pnpbios: handle 10 device ID PNP0c02 (020cd041) > PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0x1 > PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1 > PNP0700: adding irq mask 0x40 > PNP0700: adding dma mask 0x4 > pnpbios: handle 11 device ID PNP0700 (0007d041) > PNP0600: adding io range 0x1f0-0x1f7, size=0x8, align=0x1 > PNP0600: adding io range 0x3f6-0x3f6, size=0x1, align=0x1 > PNP0600: adding irq mask 0x4000 > pnpbios: handle 12 device ID PNP0600 (0006d041) > PNP0600: adding io range 0x170-0x177, size=0x8, align=0x1 > PNP0600: adding io range 0x376-0x377, size=0x2, align=0x1 > PNP0600: adding irq mask 0x8000 > pnpbios: handle 13 device ID PNP0600 (0006d041) > PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1 > PNP0501: adding irq mask 0x10 > pnpbios: handle 14 device ID PNP0501 (0105d041) > PNP0401: adding io range 0x378-0x37a, size=0x3, align=0x1 > PNP0401: adding io range 0x778-0x77a, size=0x3, align=0x1 > PNP0401: adding irq mask 0x80 > PNP0401: adding dma mask 0x8 > pnpbios: handle 16 device ID PNP0401 (0104d041) > pnpbios: handle 17 device ID PNP0a03 (030ad041) > pnpbios: handle 22 device ID TOS7009 (0970f351) > YMH0021: adding io range 0x220-0x22f, size=0x10, align=0x1 > YMH0021: adding io range 0x530-0x537, size=0x8, align=0x1 > YMH0021: adding io range 0x388-0x38b, size=0x4, align=0x1 > YMH0021: adding io range 0x330-0x331, size=0x2, align=0x1 > YMH0021: adding io range 0x370-0x371, size=0x2, align=0x1 > YMH0021: adding irq mask 0x20 > YMH0021: adding dma mask 0x2 > YMH0021: adding dma mask 0x1 > pnpbios: handle 23 device ID YMH0021 (2100a865) > sc: sc0 already exists; skipping it > vga: vga0 already exists; skipping it > isa_probe_children: disabling PnP devices > isa_probe_children: probing non-PnP devices > pmtimer0 on isa0 > adv0: not probed (disabled) > aha0: not probed (disabled) > aic0: not probed (disabled) > ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 > ata0: reset tp1 mask=03 ostat0=50 ostat1=00 > ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 > ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 > ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> > ata0: [MPSAFE] > ata1 at port 0x170-0x177,0x376 irq 15 on isa0 > ata1: reset tp1 mask=03 ostat0=50 ostat1=00 > ata1: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb > ata1: stat1=0x00 err=0x01 lsb=0x0f msb=0x0f > ata1: reset tp2 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER> > ata1: [MPSAFE] > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > atkbd: the current kbd controller command byte 0047 > atkbd: keyboard ID 0x41ab (2) > kbd0 at atkbd0 > kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 > atkbd0: [GIANT-LOCKED] > psm0: current command byte:0047 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: model GlidePoint, device ID 0-00, 2 buttons > psm0: config:00000000, flags:00000008, packet size:3 > psm0: syncmask:c0, syncbits:00 > bt0: not probed (disabled) > cs0: not probed (disabled) > ed0: not probed (disabled) > fdc0: ic_type 80 part_id 80 > fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > fdc0: ic_type 80 part_id 80 > fdc0: [MPSAFE] > fdc0: [FAST] > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > fe0: not probed (disabled) > ie0: not probed (disabled) > lnc0: not probed (disabled) > ppc0: parallel port found at 0x378 > ppc0: using extended I/O port range > ppc0: ECP SPP SPP > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/16 bytes threshold > ppbus0: <Parallel port bus> on ppc0 > plip0: <PLIP network interface> on ppbus0 > plip0: bpf attached > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) > sio0: irq maps: 0x1 0x11 0x1 0x1 > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > sio1: irq maps: 0x1 0x1 0x1 0x1 > sio1: probe failed test(s): 0 1 2 4 6 7 9 > sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 > sio2: not probed (disabled) > sio3: not probed (disabled) > sn0: not probed (disabled) > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > vt0: not probed (disabled) > isa_probe_children: probing PnP devices > unknown: <PNP0c01> can't assign resources (memory) > unknown: <PNP0c01> at iomem 0-0x9ffff,0xf0000-0xfffff,0x100000-0x201ffff on isa0 > unknown: <PNP0800> failed to probe at port 0x61 on isa0 > unknown: <PNP0303> can't assign resources (port) > unknown: <PNP0303> at port 0x60 on isa0 > unknown: <TOS7400> can't assign resources (irq) > unknown: <TOS7400> at irq 12 on isa0 > unknown: <PNP0700> can't assign resources (port) > unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0 > unknown: <PNP0600> can't assign resources (port) > unknown: <PNP0600> at port 0x1f0-0x1f7 on isa0 > unknown: <PNP0600> can't assign resources (port) > unknown: <PNP0600> at port 0x170-0x177 on isa0 > unknown: <PNP0501> can't assign resources (port) > unknown: <PNP0501> at port 0x3f8-0x3ff on isa0 > unknown: <PNP0401> can't assign resources (port) > unknown: <PNP0401> at port 0x378-0x37a on isa0 > unknown: <TOS7009> failed to probe on isa0 > unknown: <YMH0021> failed to probe at port 0x220-0x22f,0x530-0x537,0x388-0x38b,0x330-0x331,0x370-0x371 irq 5 drq 1,0 on isa0 > Device configuration finished. > procfs registered > Timecounter "TSC" frequency 165790095 Hz quality 800 > Timecounters tick every 1.000 msec > lo0: bpf attached > ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire > ad0: 19077MB <FUJITSU MHS2020AT E 8307> at ata0-master PIO4 > ad0: 39070080 sectors [38760C/16H/63S] 16 sectors/interrupt 1 depth queue > ad0: Adaptec check1 failed > ad0: LSI (v3) check1 failed > ad0: LSI (v2) check1 failed > ad0: FreeBSD check1 failed > ata0-master: pio=PIO3 wdma=WDMA1 udma=BIOSDMA cable=40 wire > acd0: <TOSHIBA CD-ROM XM-1502BN/1001> CDROM drive at ata1 as master > acd0: read 1722KB/s (1722KB/s), 128KB buffer, PIO3 > acd0: Reads: CDR, CDDA, packet > acd0: Writes: > acd0: Audio: play, 255 volume levels > acd0: Mechanism: ejectable tray, unlocked > acd0: Medium: no/blank disc > ATA PseudoRAID loaded > CIS is too long -- truncating > pccard0: Card has no functions! > cbb0: PC Card card activation failed > GEOM: new disk ad0 > Trying to mount root from ufs:/dev/ad0s1a > start_init: trying /sbin/init > Linux ELF exec handler installed > Copyright (c) 1992-2005 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 6.0-BETA4 #1: Mon Nov 18 06:32:17 CET 2002 > root@:/usr/src/sys/i386/compile/TOSHI > Preloaded elf kernel "/boot/kernel/kernel" at 0xc085f000. > Calibrating clock(s) ... i8254 clock: 1193096 Hz > CLK_USE_I8254_CALIBRATION not specified - using default frequency > Timecounter "i8254" frequency 1193182 Hz quality 0 > Calibrating TSC clock ... TSC clock: 165790005 Hz > CPU: Pentium/P55C (165.79-MHz 586-class CPU) > Origin = "GenuineIntel" Id = 0x543 Stepping = 3 > Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> > real memory = 33685504 (32 MB) > Physical memory chunk(s): > 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) > 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) > 0x0000000000c25000 - 0x0000000001f56fff, 20127744 bytes (4914 pages) > avail memory = 23515136 (22 MB) > bios32: Found BIOS32 Service Directory header at 0xc00f8e20 > bios32: Entry = 0xfe95b (c00fe95b) Rev = 0 Len = 1 > pcibios: PCI BIOS entry at 0xf0000+0xdcf1 > pnpbios: Found PnP BIOS data at 0xc00f8e30 > pnpbios: Entry = f0000:9c9f Rev = 1.0 > pnpbios: Event flag at 510 > pnpbios: OEM ID 2932f351 > Other BIOS signatures found: > Intel Pentium detected, installing workaround for F00F bug > wlan: <802.11 Link Layer> > mem: <memory> > nfslock: pseudo-device > null: <null device, zero device> > io: <I/O> > random: <entropy source, Software, Yarrow> > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > cpu0 on motherboard > pci_open(1): mode 1 addr port (0x0cf8) is 0x80001850 > pci_open(1a): mode1res=0x80000000 (0x80000000) > pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06011179) > pcibios: BIOS version 2.10 > Found $PIR table, 1 entries at 0xc00f97e0 > PCI-Only Interrupts: none > Location Bus Device Pin Link IRQs > embedded 0 11 A 0x01 3 4 5 6 7 9 10 11 12 14 15 > pcib0: <Host to PCI bridge> pcibus 0 on motherboard > pir0: <PCI Interrupt Routing Table: 1 Entries> on motherboard > $PIR: Links after initial probe: > Link IRQ Rtd Ref IRQs > 0x1 255 N 1 3 4 5 6 7 9 10 11 12 14 15 > $PIR: Found matching pin for 0.11.INTA at func 0: 11 > $PIR: Links after initial IRQ discovery: > Link IRQ Rtd Ref IRQs > 0x1 11 Y 1 3 4 5 6 7 9 10 11 12 14 15 > $PIR: IRQs used by BIOS: 11 > $PIR: Interrupt Weights: > [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ] > [ 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 ] > pci0: <PCI bus> on pcib0 > pci0: physical bus=0 > found-> vendor=0x1179, dev=0x0601, revid=0xa7 > bus=0, slot=0, func=0 > class=06-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x2280, cachelnsz=8 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x102c, dev=0x00e4, revid=0xc2 > bus=0, slot=4, func=0 > class=03-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0083, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > map[10]: type 1, range 32, base fe000000, size 24, enabled > found-> vendor=0x1033, dev=0x0035, revid=0x01 > bus=0, slot=11, func=0 > class=0c-03-10, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0a00, cachelnsz=0 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x15 (5250 ns) > intpin=a, irq=11 > map[10]: type 1, range 32, base fdfff000, size 12, enabled > $PIR: 0:11 INTA routed to irq 11 > pci0: <display, VGA> at device 4.0 (no driver attached) > ohci0: <NEC uPD 9210 USB controller> mem 0xfdfff000-0xfdffffff irq 11 at device 11.0 on pci0 > ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfdfff000 > ohci0: [GIANT-LOCKED] > usb0: OHCI version 1.0 > usb0: <NEC uPD 9210 USB controller> on ohci0 > usb0: USB revision 1.0 > uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > isa0: <ISA bus> on motherboard > ex_isa_identify() > pnp_identify: Trying Read_Port at 203 > pnp_identify: Trying Read_Port at 243 > pnp_identify: Trying Read_Port at 283 > pnp_identify: Trying Read_Port at 2c3 > pnp_identify: Trying Read_Port at 303 > pnp_identify: Trying Read_Port at 343 > pnp_identify: Trying Read_Port at 383 > pnp_identify: Trying Read_Port at 3c3 > PNP Identify complete > pnpbios: 19 devices, largest 192 bytes > PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 > PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000 > PNP0c01: adding fixed memory32 range 0x100000-0x201ffff, size=0x1f20000 > PNP0c01: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000 > pnpbios: handle 1 device ID PNP0c01 (010cd041) > PNP0200: adding io range 0-0xf, size=0x10, align=0x1 > PNP0200: adding io range 0x81-0x83, size=0x3, align=0x1 > PNP0200: adding io range 0x87-0x87, size=0x1, align=0x1 > PNP0200: adding io range 0x89-0x8b, size=0x3, align=0x1 > PNP0200: adding io range 0x8f-0x8f, size=0x1, align=0x1 > PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1 > PNP0200: adding dma mask 0x10 > pnpbios: handle 2 device ID PNP0200 (0002d041) > PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1 > PNP0100: adding irq mask 0x1 > pnpbios: handle 4 device ID PNP0100 (0001d041) > PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 > pnpbios: handle 5 device ID PNP0800 (0008d041) > PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1 > PNP0c04: adding irq mask 0x2000 > pnpbios: handle 6 device ID PNP0c04 (040cd041) > PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1 > PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1 > PNP0303: adding irq mask 0x2 > pnpbios: handle 7 device ID PNP0303 (0303d041) > TOS7400: adding irq mask 0x1000 > pnpbios: handle 8 device ID TOS7400 (0074f351) > PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1 > PNP0b00: adding irq mask 0x100 > pnpbios: handle 9 device ID PNP0b00 (000bd041) > PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1 > PNP0c02: adding io range 0x84-0x86, size=0x3, align=0x1 > PNP0c02: adding io range 0x88-0x88, size=0x1, align=0x1 > PNP0c02: adding io range 0x8c-0x8e, size=0x3, align=0x1 > PNP0c02: adding io range 0xe0-0xef, size=0x10, align=0x1 > PNP0c02: adding io range 0xb0-0xb2, size=0x3, align=0x1 > PNP0c02: adding io range 0x24-0x25, size=0x2, align=0x1 > PNP0c02: adding io range 0x2e-0x2f, size=0x2, align=0x1 > PNP0c02: adding io range 0x1882-0x1885, size=0x4, align=0x1 > PNP0c02: adding io range 0x1888-0x188d, size=0x6, align=0x1 > PNP0c02: adding io range 0x480-0x48f, size=0x10, align=0x1 > PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0x1 > PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1 > pnpbios: handle 10 device ID PNP0c02 (020cd041) > PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0x1 > PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1 > PNP0700: adding irq mask 0x40 > PNP0700: adding dma mask 0x4 > pnpbios: handle 11 device ID PNP0700 (0007d041) > PNP0600: adding io range 0x1f0-0x1f7, size=0x8, align=0x1 > PNP0600: adding io range 0x3f6-0x3f6, size=0x1, align=0x1 > PNP0600: adding irq mask 0x4000 > pnpbios: handle 12 device ID PNP0600 (0006d041) > PNP0600: adding io range 0x170-0x177, size=0x8, align=0x1 > PNP0600: adding io range 0x376-0x377, size=0x2, align=0x1 > PNP0600: adding irq mask 0x8000 > pnpbios: handle 13 device ID PNP0600 (0006d041) > PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1 > PNP0501: adding irq mask 0x10 > pnpbios: handle 14 device ID PNP0501 (0105d041) > PNP0401: adding io range 0x378-0x37a, size=0x3, align=0x1 > PNP0401: adding io range 0x778-0x77a, size=0x3, align=0x1 > PNP0401: adding irq mask 0x80 > PNP0401: adding dma mask 0x8 > pnpbios: handle 16 device ID PNP0401 (0104d041) > pnpbios: handle 17 device ID PNP0a03 (030ad041) > PNP0e00: adding io range 0x3e0-0x3e1, size=0x2, align=0x1 > pnpbios: handle 20 device ID PNP0e00 (000ed041) > pnpbios: handle 22 device ID TOS7009 (0970f351) > YMH0021: adding io range 0x220-0x22f, size=0x10, align=0x1 > YMH0021: adding io range 0x530-0x537, size=0x8, align=0x1 > YMH0021: adding io range 0x388-0x38b, size=0x4, align=0x1 > YMH0021: adding io range 0x330-0x331, size=0x2, align=0x1 > YMH0021: adding io range 0x370-0x371, size=0x2, align=0x1 > YMH0021: adding irq mask 0x20 > YMH0021: adding dma mask 0x2 > YMH0021: adding dma mask 0x1 > pnpbios: handle 23 device ID YMH0021 (2100a865) > sc: sc0 already exists; skipping it > vga: vga0 already exists; skipping it > isa_probe_children: disabling PnP devices > isa_probe_children: probing non-PnP devices > pmtimer0 on isa0 > adv0: not probed (disabled) > aha0: not probed (disabled) > aic0: not probed (disabled) > ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 > ata0: reset tp1 mask=03 ostat0=50 ostat1=00 > ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 > ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 > ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> > ata0: [MPSAFE] > ata1 at port 0x170-0x177,0x376 irq 15 on isa0 > ata1: reset tp1 mask=03 ostat0=50 ostat1=00 > ata1: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb > ata1: stat1=0x00 err=0x01 lsb=0x0f msb=0x0f > ata1: reset tp2 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER> > ata1: [MPSAFE] > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > atkbd: the current kbd controller command byte 0047 > atkbd: keyboard ID 0x41ab (2) > kbd0 at atkbd0 > kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 > atkbd0: [GIANT-LOCKED] > psm0: current command byte:0047 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: model GlidePoint, device ID 0-00, 2 buttons > psm0: config:00000000, flags:00000008, packet size:3 > psm0: syncmask:c0, syncbits:00 > bt0: not probed (disabled) > cs0: not probed (disabled) > ed0: not probed (disabled) > fdc0: ic_type 80 part_id 80 > fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > fdc0: ic_type 80 part_id 80 > fdc0: [MPSAFE] > fdc0: [FAST] > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > fe0: not probed (disabled) > ie0: not probed (disabled) > lnc0: not probed (disabled) > ppc0: parallel port found at 0x378 > ppc0: using extended I/O port range > ppc0: ECP SPP SPP > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/16 bytes threshold > ppbus0: <Parallel port bus> on ppc0 > plip0: <PLIP network interface> on ppbus0 > plip0: bpf attached > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) > sio0: irq maps: 0x1 0x11 0x1 0x1 > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > sio1: irq maps: 0x1 0x1 0x1 0x1 > sio1: probe failed test(s): 0 1 2 4 6 7 9 > sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 > sio2: not probed (disabled) > sio3: not probed (disabled) > sn0: not probed (disabled) > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > vt0: not probed (disabled) > isa_probe_children: probing PnP devices > unknown: <PNP0c01> can't assign resources (memory) > unknown: <PNP0c01> at iomem 0-0x9ffff,0xf0000-0xfffff,0x100000-0x201ffff on isa0 > unknown: <PNP0800> failed to probe at port 0x61 on isa0 > unknown: <PNP0303> can't assign resources (port) > unknown: <PNP0303> at port 0x60 on isa0 > unknown: <TOS7400> can't assign resources (irq) > unknown: <TOS7400> at irq 12 on isa0 > unknown: <PNP0700> can't assign resources (port) > unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0 > unknown: <PNP0600> can't assign resources (port) > unknown: <PNP0600> at port 0x1f0-0x1f7 on isa0 > unknown: <PNP0600> can't assign resources (port) > unknown: <PNP0600> at port 0x170-0x177 on isa0 > unknown: <PNP0501> can't assign resources (port) > unknown: <PNP0501> at port 0x3f8-0x3ff on isa0 > unknown: <PNP0401> can't assign resources (port) > unknown: <PNP0401> at port 0x378-0x37a on isa0 > unknown: <PNP0e00> failed to probe at port 0x3e0-0x3e1 on isa0 > unknown: <TOS7009> failed to probe on isa0 > unknown: <YMH0021> failed to probe at port 0x220-0x22f,0x530-0x537,0x388-0x38b,0x330-0x331,0x370-0x371 irq 5 drq 1,0 on isa0 > Device configuration finished. > procfs registered > Timecounter "TSC" frequency 165790005 Hz quality 800 > Timecounters tick every 1.000 msec > lo0: bpf attached > ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire > ad0: 19077MB <FUJITSU MHS2020AT E 8307> at ata0-master PIO4 > ad0: 39070080 sectors [38760C/16H/63S] 16 sectors/interrupt 1 depth queue > ad0: Adaptec check1 failed > ad0: LSI (v3) check1 failed > ad0: LSI (v2) check1 failed > ad0: FreeBSD check1 failed > ata0-master: pio=PIO3 wdma=WDMA1 udma=BIOSDMA cable=40 wire > acd0: <TOSHIBA CD-ROM XM-1502BN/1001> CDROM drive at ata1 as master > acd0: read 1722KB/s (1722KB/s), 128KB buffer, PIO3 > acd0: Reads: CDR, CDDA, packet > acd0: Writes: > acd0: Audio: play, 255 volume levels > acd0: Mechanism: ejectable tray, unlocked > acd0: Medium: no/blank disc > ATA PseudoRAID loaded > GEOM: new disk ad0 > Trying to mount root from ufs:/dev/ad0s1a > WARNING: / was not properly dismounted > start_init: trying /sbin/init > WARNING: /tmp was not properly dismounted > /tmp: mount pending error: blocks 16 files 4 > WARNING: /usr was not properly dismounted > /usr: mount pending error: blocks 12 files 1 > WARNING: /var was not properly dismounted > /var: mount pending error: blocks 36 files 10 > Linux ELF exec handler installed > _______________________________________________ > freebsd-mobile@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-mobile > To unsubscribe, send any mail to "freebsd-mobile-unsubscribe@freebsd.org" --nFreZHaLTZJo0R7j Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.debug" pccard0: chip_socket_enable pccard0: read_cis cis mem map 0xc4908000 (resource: 0x88000000) pccard0: CIS tuple chain: CISTPL_NONE 00 CISTPL_NONE 00 CISTPL_NONE 00 CISTPL_NONE 00 CISTPL_NONE 00 CISTPL_NONE 00 CISTPL_NONE 00 CISTPL_NONE 00 CISTPL_NONE 00 CISTPL_NONE 00 TOO MANY CIS_NONE CIS is too long -- truncating CISTPL_END ff cis mem map c4908000 CISTPL_LINKTARGET expected, code 00 observed pccard0: check_cis_quirks pccard0: Card has no functions! cbb0: PC Card card activation failed --nFreZHaLTZJo0R7j--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050913123042.GA52309>