Date: Mon, 12 Aug 2002 21:27:16 +0200 From: Wilko Bulte <wkb@freebie.xs4all.nl> To: Marcin Gryszkalis <mgryszkalis@cerint.pl> Cc: mjacob@feral.com, freebsd-alpha <freebsd-alpha@FreeBSD.ORG>, freebsd-scsi@FreeBSD.ORG Subject: Re: ISP Nvram [ was 'da driver problem?' ] Message-ID: <20020812212716.A2330@freebie.xs4all.nl> In-Reply-To: <3D58071B.6070901@cerint.pl>; from mgryszkalis@cerint.pl on Mon, Aug 12, 2002 at 09:06:03PM %2B0200 References: <Pine.BSF.4.21.0208121012280.73304-100000@beppo> <3D58071B.6070901@cerint.pl>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Aug 12, 2002 at 09:06:03PM +0200, Marcin Gryszkalis wrote: > Matthew Jacob wrote: > > Interrupt the boot process and at the loader prompt do > > set isp_debug=0x1f > > and boot (or fail to boot) and send us the output. > > Or add > > set isp_no_nvram=0x1 > > to keep NVRAM from being read. > > I'll try... (I'll be able to do it on wednesday). > > > You haven't said whether you're now loading isp firmware or not. > I loaded ispfw.ko (w/o any difference). > > Preloaded elf kernel "kernel" at 0xfffffc0000600000. > Preloaded elf module "ispfw.ko" at 0xfffffc00006000c0. > ... > isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x10000-0x100ff mem > 0x82018000-0x82018fff irq 12 at device 9.0 on pci0 > isp0: interrupting at CIA irq 12 > isp0: invalid NVRAM header > da0 at isp0 bus 0 target 1 lun 0 > da0: <DEC RZ29B (C) DEC 0016> Fixed Direct Access SCSI-2 device > da0: 20.000MB/s transfers (10.000MHz, offset 12, 16bit), Tagged Queueing Enabled Martin, are these drives inside StorageWorks SBB containers? [I lost the beginning of this thread]. If yes, do you have a mix of RZ29B-VA and RZ29B-VW drives? -- | / o / /_ _ wilko@FreeBSD.org |/|/ / / /( (_) Bulte Arnhem, the Netherlands To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020812212716.A2330>