Date: Fri, 28 Mar 2014 20:34:28 -0400 From: Dan Langille <dan@langille.org> To: Matthias Andree <matthias.andree@gmx.de> Cc: "freebsd-scsi@freebsd.org" <freebsd-scsi@freebsd.org> Subject: Re: SYM8951U sees ch0 but not sa0 Message-ID: <79F1210A-FFEB-4319-8516-05DDCBCB4398@langille.org> In-Reply-To: <533606BE.3040502@gmx.de> References: <831365dbd2a006fd36b7a1465d33fe00@mailjail.langille.org> <5335DFAE.1050109@gmx.de> <0406d95c101f43765e03272ac1bbd62b@mailjail.langille.org> <5335EA24.4080406@gmx.de> <b225037feca0e25a3bbf1ea82bfeb8e5@mailjail.langille.org> <533606BE.3040502@gmx.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mar 28, 2014, at 7:33 PM, Matthias Andree <matthias.andree@gmx.de> wrote:= >=20 > Am 28.03.2014 22:55, schrieb Dan Langille: >=20 >> I did try swapping the cable and the terminator between the two >> connectors on the rear of the library. I ran 'camcontrol rescan all' >> and 'camcontrol devlist' after each swap. Never saw the drive. >>=20 >> By daisy-chain things, there are only two connectors on the rear, so I'm >> not sure what else I could try, other than the above. >=20 > Two are at least two too few. >=20 > Sorry for the pun, I am not trying to make fun here. >=20 > Did you get the library with at least one drive fitted? Check the > drawings on pages 21, 199 and 201 in the PDF I mentioned: > There should be 2 SCSI connector sockets for the library, and 2 more > SCSI connector sockets for each tape drive. So an MSL5026 with two tape > drives should have six SCSI connectors in total. They are at the very > bottom end, possibly hidden under the protruding back part of the > drives, so be sure to check with the eyes at the same level as the > bottom of the library. >=20 > HTH >=20 The front panel claims there is a drive installed. I will look closer. But i= nbet you're right. Thank you.=20 --=20 Dan Langille http://langille.org/=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?79F1210A-FFEB-4319-8516-05DDCBCB4398>