Date: Fri, 8 Aug 2003 14:17:18 +0200 From: "Cornelius, Peter" <peter.cornelius@comsoft.de> To: "Andreas Kohn" <andreas.kohn@gmx.net> Cc: pcc@gmx.net Subject: Re: cbb: Unable to map IRQ on 5.0R (was: Re: Support forO2Micro Card Bridges?) Message-ID: <C48210CFAE2943478BB0ADA41A9FA27304B1F6@cspop.cs-nt-domaene.de>
next in thread | raw e-mail | index | archive | help
Re... Thanks a lot for the reply. > > > [...]=20 > > > cbb0: <O2Micro OZ6912/6972 PCI-CardBus Bridge> at=20 > device 8.0 on pci0=20 > > > cardbus0: <CardBus bus> on cbb0=20 > > > pccard0: <16-bit PCCard bus> on cbb0=20 > > > pcib0: _PRS resource entry has unsupported type 2=20 > I had the same error. Try to fix this first, perhaps the other error > will vanish magically. >=20 > > > cbb: Unable to map IRQ...=20 > > > device_probe_and_attach: cbb0 attach returned 12=20 > > > [...]=20 > > > =20 > Search in your DSDT for _PRS methods and look for errors. For example, > view my DSDT at http://andreas.syndrom23.de/freebsd.html#acpi >=20 > I described my "solution" in this message > http://home.jp.freebsd.org/cgi-bin/showmail/acpi-jp/2559 ACPI is a little shaky indeed on that box and several things don't work = (properly) like closing the lid, shutdown -p, and others. I have not = paid too much attention to it where I possibly should have. Now, I poked about and found that there's an amldb(8) to play with but I = assume that I would have to produce 'my own' aml file first from my BIOS = information and then incorporate the changes you propose, or am I wrong? = I can get 'something' (in asl) with acpidump(8) but, well. Then I noted = that you load your .asl files from /boot/kernel... I don't have these -- = yet, obviously :) Where should I look; how do I learn this? Thanks again and all the best, Peter.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?C48210CFAE2943478BB0ADA41A9FA27304B1F6>