Date: Thu, 17 Apr 2008 14:43:26 -0400 From: Naram Qashat <cyberbotx@cyberbotx.com> To: Boris Samorodov <bsam@ipt.ru> Cc: freebsd-emulation@freebsd.org Subject: Re: CALL FOR TESTERS: linux-f8 infrastructure ports Message-ID: <48079A4E.5070400@cyberbotx.com> In-Reply-To: <83445250@bb.ipt.ru> References: <200804090052.10898.aline@riseup.net> <200804091752.57284.aline@riseup.net> <62101822@bb.ipt.ru> <200804101126.11075.aline@riseup.net> <53131614@bb.ipt.ru> <29877906@bb.ipt.ru> <48068CAA.3040604@cyberbotx.com> <60240839@bb.ipt.ru> <48078215.7040107@cyberbotx.com> <83445250@bb.ipt.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
Boris Samorodov wrote: > On Thu, 17 Apr 2008 13:00:05 -0400 Naram Qashat wrote: >> Boris Samorodov wrote: >>> On Wed, 16 Apr 2008 19:32:58 -0400 Naram Qashat wrote: >>> >>>> As of using the latest patch set (5), I found that a few Linux >>> Seems that you have some inconsistency at the (linux) ports system. >>> >>> The patchset gives all (which I have so far) changes to linux >>> infrastructure ports. Plus _some_ (included since pathset 5) >>> patches for non-infrastructure linux ports. Other linux ports >>> should be patched manually. You may look at provided patches >>> or my earlier messages for reference (it's easy BTW). > >> When I ran install.sh, it all worked except for the patch to skype, > > I'll take care of it at the next patch set. There is no reason in > installing unpatched port -- it mat mess you (linux) libraries up. > >> which failed at RUN_DEPENDS because it had been changed since your >> diff. Otherwise everything else patched. > > And you didn't patch manyally emulators/linux-ePSXe! Or did you? No, I hadn't patched emulators/linux-ePSXe myself, but I did this time based on your recommendation below. >>> If you not transfer ports (which you are going to install) to >>> USE_LINUX_APPS then you will end up with a mess of both fc4 and >>> f8 linux infrastructure ports. >>> >>>> applications I use do not work: >>>> 1) emulators/linux-ePSXe refuses to run: >>> I'll include a patch for this port at the next patchset. >>> >>>> ./epsxe: error while loading shared libraries: libgmodule-1.2.so.0: >>>> cannot open shared object file: No such file or directory >>>> From what I can see, that file was in linux_base-fc4 because it's a >>>> part of glib 1.2, but fc6 and up use glib 2 instead. It's possible >>>> that there would need to be a port for glib 1.2 specifically for >>>> programs like ePSXe that still use it. >>> Should be fixed by linux_base-f8-8_3, the new revision has just been >>> committed. >>> >>>> 2) multimedia/linux-realplayer also refuses to run: >>>> /usr/local/lib/RealPlayer/realplay.bin: error while loading shared >>>> libraries: libexpat.so.0: cannot open shared object file: No such file >>>> or directory >>> While it's possible to commit a new port (actually, I have one) >>> textproc/linux-f8-expat1 which installs libexpat.so.0 but so far >>> I can't reproduce your error: >>> ----- >>> % pkg_info -W /usr/local/lib/RealPlayer/realplay.bin >>> /usr/local/lib/RealPlayer/realplay.bin was installed by package >> linux-realplayer-10.0.9.809.20070726 >>> % file /usr/local/lib/RealPlayer/realplay.bin >>> /usr/local/lib/RealPlayer/realplay.bin: ELF 32-bit LSB executable, >>> Intel >> 80386, version 1 (GNU/Linux), for GNU/Linux 2.2.5, dynamically linked >> (uses shared libs), stripped >>> % ldd /usr/local/lib/RealPlayer/realplay.bin | grep expat >>> libexpat.so.1 => /lib/libexpat.so.1 (0x28cf8000) >>> ----- > >> Strangely, while the pkg_info and file commands come up the same, I >> get the following when I do the ldd: > >> [12:50:38 kirby /celes/test-f8]# ldd >> /usr/local/lib/RealPlayer/realplay.bin | grep expat >> libexpat.so.1 => /lib/libexpat.so.1 (0x28caa000) >> libexpat.so.0 => not found > > That may be a sympton of mixing fc4 and f8 ports. Yeah, that seemed to be the problem, once I got linux-xorg-libs uninstalled, RealPlayer works. Although it refused to exit and froze, I had to CTRL+C in the console to kill it. I also got some other Gtk errors about libbonoboui missing this time. >> I even rebuilt RealPlayer and got the same result. > >>> And RealPlayer works fine for me. >>> >>>> This probably means that a newer version of RealPlayer needs to be in >>>> the ports or a version that works with Fedora 8 needs to be in the >>>> ports separate from the current one. >>>> 3) www/linux-kmopozer seems to start, but just sits there and never >>>> actually >> runs. >>> Runs here. >>> >>>> 4) net/skype starts, but when it brings up the EULA, I get what's in >>>> the following image: >>>> http://kirby.cyberbotx.com/skype_problem.png >>> Can't reproduce, works fine here. >>> >>>> 5) www/linux-flashplayer9, when used with www/nspluginwrapper, causes >>>> Firefox to freeze until npviewer.bin is killed. I also get the >>>> following messages in the console: >>> Sorry, I don't use this port so can't comment here. >>> >>>> (npviewer.bin:36559): Gtk-WARNING **: libqt-mt.so.3: cannot open >>>> shared object file: No such file or directory >>>> (npviewer.bin:36559): Gtk-WARNING **: libqt-mt.so.3: cannot open >>>> shared object file: No such file or directory >>>> *** NSPlugin Wrapper *** ERROR: NPP_Destroy() wait for reply: Message timeout >>>> *** NSPlugin Wrapper *** ERROR: NPClass::Invalidate() invoke: Connection closed >>>> *** NSPlugin Wrapper *** ERROR: NP_Shutdown() invoke: Connection closed >>>> The first NSPlugin Wrapper error comes up before I kill off the >>>> npviewer.bin process, and the last two messages come up when I kill >>>> it. Also, when I use nspluginwrapper -l to see what plugins are >>>> installed, that command segfaults. It even does so after I remove the >>>> flash plugin from the browser plugins folder with the command. Here's >>>> what is in my /usr/local/lib/browser_plugins: >>>> [19:30:34 kirby /celes/test-f8]# ls /usr/local/lib/browser_plugins/ >>>> .firefox.keep libjavaplugin_oji.so npplugger.so openvrml.la >>>> .thunderbird.keep libvlcplugin.so npsidplug.so openvrml.so >>>> helix.so nphelix.xpt npwrapper.nppdf.so >>>> Out of all the Linux applications I have installed, only acroread8 >>>> runs without flaws. However, I do get the following if I run it in >>>> the console: >>>> rm: cannot remove >>>> /home/cyberbotx/.adobe/Acrobat/8.0/Preferences/mozilla/prefs.js': >>>> Function not implemented >>>> (acroread:36425): Gtk-WARNING **: libqt-mt.so.3: cannot open shared >>>> object file: No such file or directory >>>> (acroread:36425): Gtk-WARNING **: libqt-mt.so.3: cannot open shared >>>> object file: No such file or directory >>> You may try to install x11-toolkits/linux-f8-qt33 here. But an absence >>> of this port shouldn't prevent a program from running. Installing x11-toolkits/linux-f8-qt33 did indeed get rid of those messages. >>>> I use KDE3 and have the gtk-qt-engines port installed, telling it to >>>> try to skin GTK applications as QT, so maybe this is related to that. >>>> As an aside, kompozer brings up the same 2 Gtk-WARNING messages, yet >>>> doesn't run at all. >>>> I also noticed the following in my all.log file when running Linux applications: >>>> Apr 16 19:27:03 kirby kernel: 128 >>>> Apr 16 19:27:03 kirby kernel: linux_sys_futex: unknown op 128 >>>> Apr 16 19:27:03 kirby last message repeated 2136 times >>>> Occasionally, op 129 comes up as well. Not sure if the latest updates >>>> to 7.0 would fix this or not, I'm still using a src updated from >>>> RELENG_7_0 and not from RELENG_7 yet. >>> Those messages should go away at the lastest RELENG_7. >>> >>> Can you please show an output of the command: >>> $ pkg_info -xI '^linux' >>> >>> Seems that you have a mix of both fc4 and f8 ports. >>> > >> Here's the output: > >> [12:51:23 kirby /celes/test-f8]# pkg_info -xI '^linux' >> linux-divx4linux-5.0.20030428_3 Linux binary release of DivX (TM) Codec >> linux-epsxe-1.6.0_3 A Sony Playstation emulator (Linux version) > > This port should be converted to new world order (manually for now). ;-) > >> linux-f8-alsa-lib-1.0.15 The Advanced Linux Sound Architecture libraries (Fedora 8) >> linux-f8-atk-1.20.0 Accessibility Toolkit (Linux Fedora 8) >> linux-f8-cairo-1.4.14 Vector graphics library Cairo (Linux Fedora 8) >> linux-f8-expat-2.0.1 PLEASE, place a comment here >> linux-f8-fontconfig-2.4.2 An XML-based font configuration API for X >> Windows (Linux Fe >> linux-f8-gtk-1.2.10 Gtk+ library (Linux Fedora 8) >> linux-f8-gtk2-2.12.5 GTK+ library, version 2.X (Linux Fedora 8) >> linux-f8-jpeg-6b RPM of libjpeg (Linux Fedora 8) >> linux-f8-libsigc++20-2.0.18 Callback Framework for C++ (Linux Fedora 8) >> linux-f8-openssl-0.9.8b The OpenSSL toolkit (Linux Fedora 8) >> linux-f8-pango-1.18.4 Pango library (Linux Fedora 8) >> linux-f8-png-1.2.22 RPM of the PNG lib (Linux Fedora 8) >> linux-f8-scim-libs-1.4.7 Smart Common Input Method libraries (Linux Fedora 8) >> linux-f8-tiff-3.8.2 RPM of the TIFF library (Linux Fedora 8) >> linux-f8-xorg-libs-7.3 Xorg libraries (Linux Fedora 8) >> linux-flashplugin-9.0r115 Adobe Flash Player NPAPI Plugin > > The same. > >> linux-hicolor-icon-theme-0.5_1 A high-color icon theme shell from the >> FreeDesktop project >> linux-kompozer-0.7.10 A complete Web Authoring System >> linux-peops-softgpu-1.17_1 A PSEmu Pro GPU plugin using a software X11 >> renderer (Linux >> linux-peops-spu-1.9_2 A PSEmu Pro SPU plugin using the OSS interface (Linux versi >> linux-pete-xgl2gpu-2.8 A PSEmu Pro GPU plugin using a modern OpenGL renderer (Linu > > The same for the last three ports. > >> linux-realplayer-10.0.9.809.20070726 Linux RealPlayer 10 from RealNetworks >> linux-xorg-libs-6.8.2_5 Xorg libraries, linux binaries > > Yes, as I suspected. This port should not present at your > system and should be removed. Well, it may share some files > with linux-f8-xorg-libs-7.3 though. > > Please, update manually the needed ports to use USE_LINUX_APPS. > >> linux_base-f8-8_2 Base set of packages needed in Linux mode (for i386/amd64) > > > WBR Naram Qashat
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?48079A4E.5070400>